- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Neje Master 2S PLUS laser engraving machine / plotter - 12 W - 255 x 420 mm
Nejelaser eng raving machine - Master 2S PLUS model. It has an open frame on the left side, which makes it dedicated primarily to processing large-area materials. It is equipped with a high quality laser module A40640 generating a beam of 450 nm wavelength. It works with materials such as wood, leather, leather-like materials, plastic, rubber, among others. The working area of the device is 255 x 420 mm. Neje Master 2S PLUS 12 W laser plotter communicates with a computer using a USB port. Additionally, the device has been equipped with a Bluetooth wireless control communication module.
Layout of the components.
Special features of Neje Master 2S PLUS
- Enables you to engrave and cut out a wide range of materials with its 12 W laser head
- Has a semi-open frame that allows you to work with large-format materials, it is primarily dedicated to processing large-format materials
- It is a model equipped with a 32-bit driver that allows engraving at speeds up to 200000 mm/min
- Has a large working area of 255 x 420 mm
- Dedicated, free applications for Windows, Mac, Android, iOS
- Bluetooth - wireless operation from your phone or computer
- Support for popular LightBurn and LaserGRBL software
- Only 4 screws are needed to install the Neje Master 2S PLUS laser engraver, and the whole assembly process does not require professional tools
- State-of-the-art head with intelligent controller to control temperature and regulate cooling
- Equipped with advanced laser module A40640
- Neje's product is also a laser engraving machine for metal, wood, leather and leather-like products
- Equipped with MEMS Protection anti-vibration sensor
Engraving area
Neje Master 2S PLUS has an engraving area of 255 x 420 mm with a resolution of 3400 x 5600 pixels. The entire engraving process is extremely accurate. The dot spacing is 0.075 mm, which is approximately 339 dots per inch.
Advanced laser module
Neje Master 2S PLUS laser plotter is equipped with advanced laser module A40640. The laser beam is created by combining two high power laser diodes. The beam size is 0.05 x 0.05 mm. Near the module there is also installed extremely efficient and quiet fan that dissipates the generated heat.
Laser construction.
All components shown in the picture are included in the kit with the Neje laser engraver.
Compatible materials
The Neje laser engraver allows you to create decorative designs, signatures and any other laser work. The device works with materials such as wood, plywood, mdf, hdf, leather and leather-like products, plastics, engraving laminate, textiles, anodized aluminum, coated metals and more. A complete list can be found here. The device cannot be used to engrave into reflective or transparent materials.
The set includes
- Neje Master 2S PLUS engraving machine - 12 W - for self-assembly
- Laser module A40640
- Power supply 12 V 4 A
- Operating instructions
- Protective goggles
- USB cable
- Keys for assembly
- Material samples
- Useful accessories - including pen, brush, Allen wrench, etc.
Technical specification
- Type: Laser engraver, laser plotter
- Model: Master 2S PLUS
- Frame dimensions: 550 x 470 x 140 mm
- Frame material: aluminum profiles and composite elements
- Workspace dimensions: 255 x 420 mm
- Point spacing: 0.075 mm
- Resolution: 3400 x 5600 pixels
- Technology: High precision engraving
- Motor: Stepper motor
- Motor dimensions: 42 x 42 x 40
- MCU: 32-bit
- Maximum operating speed
- X axis: 200000 mm/min
- Y axis: 150000 mm/min
- Software: NEJE + laserGRBL 1.1F
- Laser type: A40640
- Head power: 12 W
- Laser head lifetime: approximately 20,000 hours
- Wavelength: 450 nm
-
Power control: yes
- PWM: yes
- Wireless control: yes, Bluetooth
- Wired connection: USB
- Supported formats: .bmp, .jpg, .jpeg, .png, .gif, .tif, .tiff, .tga, ai, .pdf, .sc, .dxf, .hpgl, .plt, .rd, .scpro2, .svg, .lbrn, .nc
Not sure what can be done with laser engraving? Virtually anything! Engrave any design you want with the Neje Master.
Would a mini laser engraver be better? Check out the Neje DK-8-KZ laser engraver - 1500 mW.
