Description
2-channel opto-isolator designed to control systems with voltages up to 70 V through the system of digital 3 - 5V, e.g., microcontrollers. The module protects the system of executive power, from the driver that provides the control system.
The module works with both systems on the logic 5 Volt, and 3.3 V. It is Ideal for connecting systems operating with higher voltages (e.g. PLC) for sets, e.g.,Arduinoor mini-computer, including Raspberry Pi andBeagleBone Black.
Connection
Torun the system you need to connect a higher voltage power supply receiver,HV and a ground receiverHVG. The control signals are put to contactsIN1andIN2, the ground of the layoutto the pinGND. The module transmits them to the outputs OUT1,OUT2respectively to the voltage specified on the outputHV. The board has additionaltransistorscorrecting the reverse logic control, therefore, to introduce a high position on input leads to the emergence of heightened output.
Specification
- The supply voltage of the receiver: up to 70 V
- The dissipated power per channel: 125 MW max
- Tension control: 3 V to 5 V
- The system does not change the control signal
- Outputs:holesto goldpin connectors - 2.54 mm
- Module dimensions: 16 x 13 mm
Detailsof the documentationsystem ILD213T.
Connectors
Outputs are solder fields enabling for soldering goldpin connectors(2.54 mm pitch). Thanks to them, it is possible to connect the system with thebreakout boardor the main module (for example,STM32DiscoveryorArduino) viawires. Tothe computerthe system is connected with the available in our storethe mini-usb cable.
|
The set does not contain the goldpin strip, it can be purchased separately. |
Useful links |
