- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
Arduino PrimoCoremodule withBluetooth BLEandNFC.It has a built-inaccelerometer, gyroscopeandtemperature andhumiditysensor, 10digital inputs/outputsof which 10 can beused as PWM outputs (e.g. forcontrolling motors) and 8 analogueinputs. The system is clocked with a 64 MHz clock signal, has512 kB ofFlashmemoryand 64 kB ofSRAMmemory. Operating voltage of Arduino Primo Core outputs is 3,3 V.
Original Arduino product is sold, Botland is an officialdistributor of this company.
Driver installation
The manufacturer recommends installing the drivers according to the following instruction:
- Remove the "Arduino nRF52 Boards" driver from the PCB Manager (Tools ->PCB ->PCB Manager).
- Delete the Arduino15 folder located in C:Users{username}AppDataLocalArduino15
- Restart Arduino IDE
- After the decimal point, add the link: http://downloads.arduino.cc/packages/package_primocore_index.json in File->Preferences in the Additional URLs to the tile manager
- Install "Arduino nRF52 Boards" version 1.0.2 drivers in the tile manager.
|
First run To make it easier to start working with the module, we recommend that you readthe manufacturer's guide. |
The layout of elements on Arduino Primo Core board.
Communication .
The module is equipped with the most popular communication interfaces, I2C, SPI, UART, etc. Communication details can be found onthe manufacturer's website anduser guide.
Communication diagram with nRF52 Core.
Specification .
- Power supply voltage: 5 V
- The voltage of the leads: 3,3 V
- Microcontroller: Nordic nRF52832
- Maximum clock frequency: 64 MHz
- SRAM: 64 kB
- Flash memory: 512 kB
- Bluetooth BLE
- NFC Agreement
- RGB diode
- Built-in accelerometer and gyroscope
- Temperature and humidity sensor
- Ports I/O: 10
- PWM outputs: 10
- Number of analog inputs: 8
- CR2032 battery connector (battery supplied)
- Reset button
- On/Off switch
- Serial interfaces: UART, SPI, I2C
- External interruptions
- Dimensions: 32 x 32 mm
|
Free software can be downloaded from the manufacturer's websitewww.arduino.cc. We assure you that all tiles sold in our shop marked with Arduino symbol are original. You can find out about it by checkingthe list of authorized distributors. |
Useful links |
