Are you designing and creating a robot or device that needs power to work properly? Then you need a battery, which in turn will be stable in place, and fixed in place. There are mounting elements for batteries in our offer, among which you will find baskets for batteries and cables. In addition, we have containers designed for safe transport of batteries, so they are protected against possible mechanical damage. Voltage indicators deserve special attention, as well as all kinds of devices used for measuring current load. With them you can control the level of battery charge and recharge them at the right time. This way you avoid surprises in the form of discharging the battery and stopping the device at an unexpected moment.
- New
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
GJ-M12-25IR(5MP)-3 M12 25mm 5Mpx lens - for Raspberry Pi camera
Index: RPI-22483
- Reduced price
- Promotion
Accessories for batteries
Loading...
Clip for 9V battery with cable - 15cm
Connector for easy connection of popular 9 V (6F22) batteries with stripped cable ends.
Index: AKC-00416
Index: AKC-00416
Battery holder for 4 AA (R6) batteries with cover and switch
Basket with lid and switch for four AA batteries (big sticks).
Index: AKC-00236
Index: AKC-00236
A basket for one 18650 type battery. It has wires with insulation removed at their ends, which facilitates installation of the device.
Index: AKC-05242
Index: AKC-05242
Adapter plug DC 5.5 / 2.1 - plug connector 6F22 battery 9V
Adapter that allows you to connect a popular 9 V 6F22 battery for DC 5.5/2.1 mm connectors used in development sets, for example, Arduino.
Index: AKC-01369
Index: AKC-01369
Index: AKC-00486
Battery clip 9V (6F22) with cable
A connector to facilitate the connection of popular 9-volt (6F22) batteries with cables with insulation removed at the ends.
Index: AKC-05502
Index: AKC-05502
Battery holder - 3 x AA (R6) with cover and switch
Basket with lid and switch for three AA batteries (big sticks).
Index: AKC-00174
Index: AKC-00174
Index: AKC-00173
Battery holder for 2 AA (R6) batteries with cover and switch
Basket with cover and switch for two AA batteries (large fingers).
Index: AKC-00738
Index: AKC-00738
2-vein connecting cable is ended on one side with JST connector, pitch of 2 mm, on the other, with cables with the removed insulation. The length is about 10 cm.
Index: SEE-04394
Index: SEE-04394
Cell holder for 2x 18650 - serial connection
A basket for two 18650 type batteries. It has wires with insulation removed at their ends, which makes it easy to install the device.
Index: AKC-05240
Index: AKC-05240
Index: AKC-01654
Battery holder for 1 pack 9V (6F22) with cover and switch
Basket with cover and switch for two 9V (6F22) type batteries.
Index: AKC-01653
Index: AKC-01653
Pair of JST - BEC connectors for Li-Pol batteries
The set includes a pair of BEC (JST) connectors - socket, plug and plates.
Index: AKC-02865
Index: AKC-02865
Battery holder for 2 packs AAA (R6) with cover and switch
Basket with cover and switch for two AAA batteries (small fingers).
Index: AKC-01651
Index: AKC-01651
Index: AKC-01536
Power supply wire with JST - BEC plug
Double silicone cable ended with a plug of type "BEC", is used to connect power from the rechargeable batteries and batteries.
Index: KAB-01442
Index: KAB-01442
Cell holder for Li-Ion battery type 18650
Black, plastic holder for rechargeable batteries Li-Ion 18650. Dimensions: 22 x 22 mm, inner diameter: 18.3 mm.
Index: GRL-12118
Index: GRL-12118
Straight 2-pin Molex 51005 plug, 2mm raster with wire
2-pin, female connector Molex 51005 type with the cable with the length of 15 cm. Pitch is equal to 2 mm.
Index: KAB-07451
Index: KAB-07451
Molex 51005 2-pin cable 2mm male
2-pin male connector, type Molex 51005 with the cable with the length of 15 cm. Pitch is equal to 2 mm.
Index: MOD-07452
Index: MOD-07452
Clip for 9V battery (6F22) with alligator clips
A connector that makes it easy to connect popular 9V (6F22) batteries with crocodile-terminated leads.
Index: AKC-04823
Index: AKC-04823
Index: AKC-01649
Index: DNG-10158
JST - BEC socket for Li-Pol batteries
BEC (JST) slot is mainly used for connections on the cables powering the rechargeable battery, for example, lithium-polymer.
Index: UCC-01320
Index: UCC-01320
See also
Check our range of battery accessories. Take advantage of useful and practical elements, thanks to which you can fit the battery to your device or robot in a quick and safe way.
Battery installation
When designing an electronic device, we must remember that it should have a power source, especially if we care about its mobility. This includes robots and portable devices. This requires us to mount the battery in the device and stabilize it properly so that it remains in place and does not change its position during operation. For the assembly of batteries, among other things, the assembly baskets are designed. We have to adjust them to the type of batteries, which differ in size and shape. Baskets with and without cover are available in the shop, as well as special models with a practical switch. Particularly noteworthy are sockets with one to six cells. It is also worth using Velcro fasteners, with which you can attach the battery in a non-invasive way, increasing its stability. Velcro is self-adhesive or has a special buckle. For welding the cells we use special tapes.
To connect the power supply to the device, you will need wires and connectors, which you will also buy in Botland store. You can choose from the commonly known crocodiles, electric cubes and banana connectors. We also recommend adapters, clips and quick connectors gel. Battery installation significantly determines the quality and performance of the device. It also affects its lifetime, so it is worth to mount the battery well in the device, remembering to secure and stabilize its position.
Battery transportation
Batteries and accumulators must be provided with suitable conditions during transport to preserve their properties and to protect them from possible damage. For this purpose, special containers and bags shall be used that are adapted to the size and shape of the respective AA and AAA batteries. In addition, we also have bags adapted to transport Li-Pol packages. They are made of high quality materials with fire resistant properties. They protect the batteries from moisture and sunlight. Moreover, even in the case of unfavourable conditions and the occurrence of ignition, the bags effectively protect against the spread of fire and thus minimize the risk of fire.
The bags are sealed so that no oxygen, which is the trigger for the fire, reaches inside. It should be remembered that this type of protection is not only a matter of our own safety, but also that of other travellers, such as planes, buses and trains.
Have you already chosen a battery and now you need to install it properly in your device or robot? Take advantage of our range of mounting accessories, which include special baskets in various sizes and practical Velcro fasteners. If you transport batteries or Li-Pol packages separately, protect them from mechanical damage and take care of your own and other travellers' safety by packing them in special bags and containers.