- On sale!
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- EOL
- Promotion
- Reduced price
- Promotion
Accessories for batteries - Strona 3
Loading...
JST SH 4 PIN 20 cm cable + socket - SparkFun PRT-10359
4 - vein connecting cable ended on one side with connector of JST SH, on the other, with the removed insulation. Wire's length is approximately 20 cm, the kit also has a JST...
Index: SPF-02039
Index: SPF-02039
Index: AKC-06431
Cell holder for 2x 18650 battery
A container for storing batteries or accumulators. Prevents accidental short circuit. Designed for accumulators/cells type 18650.
Index: NSZ-05661
Index: NSZ-05661
BEC connector (JST) mainly used for connections on battery cables, e.g. lithium polymer batteries.
Index: UCC-06098
Index: UCC-06098
Li-pol 1-8S voltage indicator with P309 buzzer
Voltage indicator for Li-Pol batteries (from 1 to 8 cells) equipped with a low voltage sounder.
Index: MOD-05015
Index: MOD-05015
Adhesive velcro 70x30 mm 5 packs
Five pieces of self-adhesive velcro, 70 x 30 mm, useful for fixing batteries, receivers, regulators, etc. to robots or RC models.
Index: AKC-00643
Index: AKC-00643
Index: BAT-06380
Cell holder for 4x 18650 battery - series connection
Plastic basket in black , accommodates up to four 18650 type batteries and has two leads. Cell assembly and disassembly is easy thanks to the use of springs. The cage allows...
Index: DNG-16515
Index: DNG-16515
Battery holder for 2x AA with JST-PH 2,54 mm plug
Basket for two AA batteries . It has a 150 mm long cable terminated with a JST-PH 2.54 mm plug.
Index: SPF-09498
Index: SPF-09498
Battery holder for 2x 2032 with cover and switch - without connector
Basket for two 2032 type batteries (so called lozenges). It has a cover, switch and wires with removed insulation. The output voltage is 6 V.
Index: DNG-11887
Index: DNG-11887
Battery holder for 2x CR2032 3V - 5pcs
Stand for two CR2032 3 V batteries. Price for 5 pcs.
Index: BAT-06378
Index: BAT-06378
Battery charge level and sound level indicator - KA2284
The module is based on the KA2284 system. It is used to measure the input signal with the 5 LEDs, which are gradually included depending on the value of the measured voltage....
Index: MOD-07150
Index: MOD-07150
Extender with DEAN connectors with a length of 13 cm. On the one side, ended with a slot, on the other, with a plug.
Index: KAB-01682
Index: KAB-01682
A pair of micro T-DEAN connectors
The kit contains a pair of micro DEAN connectors - socket and plug.
Index: KAB-02719
Index: KAB-02719
Battery holder for 3x AA (R6) with aligator clips
Basket for three AA type batteries (large fingers) with wires terminated with crocodiles.
Index: AKC-04816
Index: AKC-04816
Crocodile wire rectangle - 50cm colored 5pcs
Set of 5 colored wires ended from both sides with the big connector of crocodile type. Length of the single element is 50 cm.
Index: KAB-04858
Index: KAB-04858
Battery holder for 2x AAA with JST-PH plug
Basket for two AAA batteries. It has a 150 mm long cable with a JST plug, 2.54 mm pitch.
Index: TRP-10896
Index: TRP-10896
The tape for welding cells 0.12 x 8mm - 10m
Nickel-plated welding tape with 10 m length. Dimensions: 8 x 0.12 mm.
Index: NSZ-09462
Index: NSZ-09462
Protective bag for Li-Pol batteries 30x23cm
The bag is made of fireproof material , is closed with a strong Velcro to ensure a high level of security. It is used to safely charge, store and transport Li-Pol batteries....
Index: AKS-10682
Index: AKS-10682
Lipo Charger - charging module for Li-Pol batteries via USB C - DFRobot DFR0668
Lipo Charger module from DFRobot with USB type C connector. It is designed to charge one Li-Pol battery cell of 3.7V . The small size of the module allows you to use it in...
Index: DFR-19387
Index: DFR-19387
Basket for three type D (R20) batteries. The item has two wires with the insulation removed in black and red.
Index: DNG-12468
Index: DNG-12468
Adhesive velcro with a buckle for GPX 350mm accumulators - 1pc
Turnip is an aesthetically pleasing and durable mount for batteries, e.g. li-pol packages. It is 350 mm long and 20 mm wide. Price for one piece.
Index: AKC-04363
Index: AKC-04363
Battery holder for 2x 2032 with cover and switch - Adafruit 783
Basket for two 2032 type batteries (so-called pills). It has a cover, switch and wires terminated with a 2 mm JST plug. Output voltage is 6 V.
Index: ADA-03288
Index: ADA-03288
Adhesive velcro with a buckle for Dualsky 380mm accumulators - 1pc
Turnip is an aesthetically pleasing and durable mount for batteries, e.g. li-pol packages. The length is 380 mm. The set includes 1 pcs. The model is available in two colour...
Index: AKC-08181
Index: AKC-08181