- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Urbicum GX
Industrial3D printer forprofessional use. It has aworking area of 1020 x 630 x 500 mm. The device offersa print speed of up to 300 mm/sec.It allows to presseven 6 kg ofmaterialperday.Thanks to the use of the highest quality components and original solutions of the Polish manufacturer Urbicum, the GX model offers excellent quality 3D prints.
Urbicum GX.
Innovative design of the extruder
Urbicum GX has anextruder madeentirelyof high quality metal. This significantly extends its life and enables stable and precise work.The filament sensor, which reacts in case of a sudden error in the movement of the printing material, allows to protect the resulting model from imperfections caused by a sudden interruption of printing. The extruder hasa knurling pressure regulator for the filament. The maximumtemperature of theprintingnozzleis400°C, withthepossibility of unlocking to 450°C.
Printing nozzle Urbicum GX.
Perfectly flat table for printing
The base of the vacuum printing platform is aperfectly flat 15 mm thick aluminium. The table uses an efficient, noise-generatingvacuumpump. The maximum platform temperature is 140°C.The manufacturer used an advancedsystem for mapping the curvature ofthe coverage.
A sample model made with Urbicum GX.
Closed working chamber
The printer has aclosed workspace of 1020x 630 x 500 mm,adapted to the safe use of almost all types of filaments available on the market. It is equipped withan air filterreaching the device anda Hepa+ carbon filterprotecting against the escape of harmful fumes from inside, supported by anactive circulationsystem. The chamber is equipped withRGBW LED lighting,whichis at the same time an indicator of the next stages of work. Access to the interior is secured by a locked flap with an RFID module.
Printing Urbicum GX.
Advanced axis movement mechanics
In order to achieve the best possible printing results, Urbicum GX uses parts fromrenowned manufacturers:
- GATES / OPTIBELT belts
- Panasonic 400 W XY axis servomotors
- HIWIN/BOSCH rails and linear motion trolleys for XYZ planes
- HIWIN 1605 ball screws used in the Z axis
Idle motion of Urbicum GX.
Electronic circuits are based on the originalsolution of the manufacturer Urbiboard v 0.3. All components of the control and drive system are located outside the working area of the device. The device is operated with a7'' touch screen display.
Urbicum GX specification
| Technical Specification | |
|---|---|
| Power supply voltage: |
230 V (AC - mains) |
| Total power: | 2500 W |
| Display: | 7'' colour touch screen |
| Print speed: | up to 300 mm/s |
| Idle speed in XY axes | recommended up to 1200 mm/s |
| Accelerations | recommended up to 5000 mm/s² |
| Nominal resolution of the Z axis | 0.01 mm |
| Nozzle diameter: |
Standard: 0.6 mm alternative: nozzles from 0.3 mm to 1 mm every 0.1 mm |
| The filament served: |
PLA, ABS, PET, PA, PC, HIPS, PVA, TPU, etc. |
| Diameter of pillar: | 1.75 mm |
| Mode of operation: | Wi-Fi or SD card |
| File format: | STJ, G-Code |
| Software: | KISSlicer, Simplify3D |
| Print size: |
1020 x 630 x 500 mm |
| Nozzle temperature: | 400°C (can be unlocked up to 450°C) |
| Working table temperature: | 140°C |
| Dimensions of the printer: | 1600 x 950 x 950 mm (without trolley) |
| The weight: | 260 kg |
| The manufacturer delivers the printer together with a dedicated work trolley. |
Comparison of Urbicum printers available in the offer
| Technical Specification | |||
|---|---|---|---|
| A model: | Urbicum DX | Urbicum MX | Urbicum GX |
| Work area: | 305 x 305 x 380 mm | 405 x 460 x 500 mm | 1020 x 630 x 500 mm |
| Print speed: |
up to 200 mm/s |
up to 200 mm/s |
up to 300 mm/sec |
| Nozzle temperature: | max. 400°C | max. 400°C |
max. 400°C Can be unlocked to450°C |
| Working table temperature: | max. 140°C | max. 140°C | max. 140°C |
| Nominal resolution of the Z axis: | 0.01 mm | 0.01 mm |
0.01 mm |
| Mode of operation: | Wi-Fi or SD card | Wi-Fi or from an SD card | Wi-Fi or from an SD card |
| Diameter of the filament: | 1.75 mm |
1.75 mm |
1.75 mm |
| Printer dimensions: |
678 x 498 x 736 mm |
770 x 675 x 900 mm |
1600 x 950 x 950 mm |
| The weight: | 55 kg | 90 kg | 260 kg |
| Nozzle diameter: |
standard: 0.3 mm alternative: from 0.2 mm to 1 mm every 0.1 mm |
standard: 0.5 mm alternative: from 0.3 mm to 1 mm every 0.1 mm |
standard: 0.6 mm alternative: from 0.3 mm to 1 mm every 0.1 mm |
| The manufacturer offers a d2d guarantee. |
Useful links |
