- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Urbicum MX
A professional3D printerwith a workspace of405 x 460 x 500 mm.The device usesFDM/FFF incremental technology andis compatible with most types of filaments available on the market. The printer is manufactured by a Polish company Urbicum.
Urbicum MX.
Original design of the extruder
Designed by the manufacturer, a singleextruder is made entirely of metal, which significantly increases its resistance to daily use. The use ofa filament sensor, which warns of its end or entanglement, allows to protect the model from damage. The extruder has an adjustable knurling pressureon the sliding filament.
Printing Urbicum MX using a flexible material.
The dissolving surface of the filament is 30 m.Printing head, reaches maximum working temperature of 400°C.Durable construction allows to press almost 5 kg of printing material daily.
Perfectly flat platform for printing
Thevacuumprintingtablein Urbicum MX is made of 10mm aluminium with a perfectly flat surface.It is covered with polycarbonate (4 mm thick) or aluminium (6 mm) overlays. The integrated vacuum pump does not require user service and does not causeadditional noise. The maximumoperating temperature ofthe printing platform is140°C.The table does not require mapping.
Measurement of sound intensity during operation of Urbicum MX.
Precise shifting mechanisms, high operating speed
The advanced design solutions used in the Urbicum MX enableprinting at speeds up to 200 mm/sec. The printer uses solutions ofrenowned manufacturers of precisioncomponents:
-
GATES / OPTIBELT belts
- HIWIN/BOSCH rails and linear motion trolleys for XYZ planes
- HIWIN 1605 ball screws used in the Z axis
In Urbicum MX, the manufacturer used his owncontrol system Urbiboard v 0.3. The design ofthe printer provides for the placement of all electronic components and drive motorsoutside theworking area.
Industrial operating speeds of Urbicum MX
Closed working chamber with Hepa filter
Theworking area, which has impressive dimensions at Urbicum MX: 405 x460 x 500 mm,is located in aclosed chamber.It is fully prepared for secure printing from demanding technical materials. It hasa reheating functionand is also additionally protected by aHepafilter. Italsooffersthe possibility of connecting an additional extractor to remove harmful fumes. The chamber hasinternal RGBW lighting,whichchanges colour depending on the stage of work.
Closed casing of Urbicum MX.
External dimensions of the printer are: 770 x 675 x 900 mm. A recess located in the wall of the casing allows to place a filament reel inside. Urbicum MX is operated by means of a 4.3'' to 7'' colourtouch screenwith amagnetic mount.
Urbicum MX specifications
Technical Specification | |
---|---|
Power supply voltage: |
230 V (AC - mains) |
Total power: | 1080 W |
Display: | colour touch screenfrom 4.3'' to 7'' |
Print speed: | up to 200 mm/s |
Idle speed in XY axes | recommended up to 500 mm/s |
Accelerations | recommended up to 3000 mm/s² |
Nominal resolution of the Z axis | 0.01 mm |
Nozzle diameter: |
Standard: 0.5 mm alternative: nozzles from 0.3 mm to 1 mm every 0.1 mm |
The filament served: |
PLA, ABS, PET, PA, PC, HIPS, PVA, TPU, etc. |
Diameter of pillar: | 1.75 mm |
Mode of operation: | Wi-Fi or SD card |
File format: | STJ, G-Code |
Software: | KISSlicer, Simplify3D |
Print size: |
405 x 460 x 500 mm |
Nozzle temperature: | 400°C |
Working table temperature: | 140°C |
Dimensions of the printer: | 770 x 675 x 900 mm (without trolley) |
The weight: | 90 kg |
The manufacturer delivers the printer together with a dedicated work trolley. |
Urbicum MX printer with a dedicated work trolley.
Comparison of Urbicum printers available in the offer
Technical Specification | |||
---|---|---|---|
A model: | Urbicum DX | Urbicum MX | Urbicum GX |
Work area: | 305 x 305 x 380 mm | 405 x 460 x 500 mm | 1020 x 630 x 500 mm |
Print speed: |
up to 200 mm/s |
up to 200 mm/s |
up to 300 mm/sec |
Nozzle temperature: | max. 400°C | max. 400°C |
max. 400°C Can be unlocked to450°C |
Working table temperature: | max. 140°C | max. 140°C | max. 140°C |
Nominal resolution of the Z axis: | 0.01 mm | 0.01 mm |
0.01 mm |
Mode of operation: | Wi-Fi or SD card | Wi-Fi or from an SD card | Wi-Fi or from an SD card |
Diameter of the filament: | 1.75 mm |
1.75 mm |
1.75 mm |
Printer dimensions: |
678 x 498 x 736 mm |
770 x 675 x 900 mm |
1600 x 950 x 950 mm |
The weight: | 55 kg | 90 kg | 260 kg |
Nozzle diameter: |
standard: 0.3 mm alternative: from 0.2 mm to 1 mm every 0.1 mm |
standard: 0.5 mm alternative: from 0.3 mm to 1 mm every 0.1 mm |
standard: 0.6 mm alternative: from 0.3 mm to 1 mm every 0.1 mm |
The manufacturer offers a d2d guarantee. |
Useful links |