- Reduced price
- Promotion
- On sale!
- Promotion
iNode Energy Meter - energy consumption monitor - reflectance sensor
Index: INO-18773
- On sale!
- Promotion
BD65496MUV - single-channel motor controller 16V/1,2A - Pololu 2960
Index: PLL-04238
- Reduced price
- Promotion
Various wires - Strona 4
Loading...
Connecting wires male-male 20cm yellow - 100pcs.
Set of 100 copper connection cables with a length of 20 cm in yellow color.
Index: GRL-13582
Index: GRL-13582
Connecting cables Male-female 20cm blue - 100pcs.
Set of 100 copper connecting wires 26AWG with the length of 20 cm in blue color.
Index: DNG-11907
Index: DNG-11907
Connecting cables Female-female 20cm yellow - 100pcs
Set of 100 26AWG copper connection wires with a length of 20 cm in yellow colour.
Index: DNG-11911
Index: DNG-11911
Connection cable equipped with Gravity series connector, manufactured by DFRobot . Designed to connect digital peripherals (sensors) equipped with a Gravity connector to...
Index: DFR-19547
Index: DFR-19547
Gravity - set of digital connection wires - male plug PH2.0 - 30cm - 10pcs. - DFRobot FIT0896
A set of connecting cables with a length of 30 cm equipped with two connectors - one compatible with the Gravity standard and one 3-pin PH2.0 male goldpin connector. The...
Index: DFR-21234
Index: DFR-21234
TLWY ribbon cable - 8x0.12 mm²/AWG 26 - multicoloured - 50m
The TLWY type of ribbon cable, made of soft copper wires , has 8 wires of 1.3 mm diameter . The conductors are covered with various colours of insulation, made of a special...
Index: VEG-16263
Index: VEG-16263
DFRobot Gravity - Sensor connection cable for Arduino - 4-pin - I2C/UART - 50cm - 10pcs. - FIT0773
Connection cable equipped with Gravity series connector. Manufactured by DFRobot, it is designed to connect the sensor to the main module - Arduino. It supports two most...
Index: DFR-19549
Index: DFR-19549
DFRobot Gravity - connection cable - for analog sensors to Arduino - 30cm - 10pcs.
Connection wires with Gravity standard produced by DFRobot. Designed to connect analog peripheral devices (sensors equipped with Gravity connector) with Arduino type...
Index: DFR-19551
Index: DFR-19551
Gravity - I2C/UART connection cable set - female-female - 30cm - 5pcs - DFRobot FIT0916-FF
The set includes 5 pieces of female-female connection cables with a length of 30 cm from DFRobot. The cable consists of four wires corresponding to the power, ground and...
Index: DFR-22463
Index: DFR-22463
DFRobot Gravity FIT0769 - connection cable - for analog sensors to Arduino - 50cm - 10pcs.
A set of Gravity standard compatible connection wires manufactured by DFRobot. Designed to connect analog peripherals (sensors equipped with Gravity connector) with Arduino...
Index: DFR-19548
Index: DFR-19548
DFRobot Gravity - connection cable - for digital sensors to Arduino - 30cm - 10pcs.
Connection wires with Gravity standard produced by DFRobot. Designed to connect digital peripherals - sensors equipped with Gravity connector - with Arduino microcontroller....
Index: DFR-19552
Index: DFR-19552
Gravity - I2C/UART connection cable set - female-male - 30cm - 5pcs - DFRobot FIT0916-MF
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. They are terminated with a female connector on one side and a male connector on the other. The cable...
Index: DFR-22468
Index: DFR-22468
Gravity - I2C/UART connection cable set - male-male - 30cm - 5pcs - DFRobot FIT0916-MM
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. The cable consists of four wires corresponding to the power, ground and signal lines for I2C and...
Index: DFR-22465
Index: DFR-22465
Male plug cables - crocodile - 10pcs
Set of 10 wires. On one side is a standard male plug (goldpin plug), on the other end is the crocodile connector.
Index: KAB-01245
Index: KAB-01245
Male-male connecting cables - 75 pieces
75 set of connecting cables for breadboard of different lengths and in different colors.
Index: KAB-01378
Index: KAB-01378
Set of 5 wires of different colors with a length of 25 cm ended with connector with hook.
Index: KAB-01554
Index: KAB-01554
Crocodile cables - 100cm - 2pcs
Wires finished on both sides with the crocodile connectors. Length of a single element is 100 cm. The kit includes two wires with tips in black and red.
Index: KAB-03935
Index: KAB-03935
Connecting cables Female-male 20cm black - 100pcs
Set of 100 copper connecting wires 26AWG with the length of 20 cm in black color.
Index: DNG-11904
Index: DNG-11904
Grove - set of 5 female-female 4-pin - 2mm / 40cm with latch
A set containing five 4-pin Grove cables with a clip, 40 cm long. The cables are used to connect the sensors to the Grove connector with the base cover.
Index: SEE-15574
Index: SEE-15574
TLWY ribbon cable - 10x0,75mm2/AWG 18 - multicolor - 25m
High quality ribbon cable type TLWY, made of copper wires . The wires have a diameter of 2 mm . Each of them is covered with different colour of insulation , which makes it...
Index: VEG-16276
Index: VEG-16276
- EOL
Gravity - connection cable set - male plug PH2.0 - 30cm - 10pcs. - DFRobot FIT0897
A set of connecting cables equipped with a connector compliant with the Gravity standard and a 3-pin PH2.0 male goldpin connector. The cables were manufactured by DFRobot, they...
Index: DFR-21233
Index: DFR-21233