DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - Shield for Arduino
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - Shield for Arduino
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - Shield for Arduino
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - Shield for Arduino
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - pad for Arduino
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - Shield for Arduino - zdjęcie 1
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - Shield for Arduino - zdjęcie 2
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - Shield for Arduino - zdjęcie 3
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - Shield for Arduino - zdjęcie 4
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - pad for Arduino - zdjęcie 5

DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E - Shield for Arduino

Index: DFR-12362 EAN: 5904422319076
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

Shield for Arduino, which allows you to send text messages and create connections in the GSM network. It also has GPS and LTE, as well as sensor BME280. It communicates via serial interface UART (RX, TX) using the AT commands.

€49.28
€40.06 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino

Description

The module working with Arduino, which provides connectivity in GSM and GPRS. It allows for voice calls, sending SMS messages. It also has built-in GPS and LTE. On the board are: connector for SIM card, u.FL slot for mounting an external antenna. NB-IoT is a new field of the Internet of things that supports a connection to the phone network in the WAN. In addition, the sensor has a sensor BME280.

DFrobot Shield SIM7000E

Applied SIM7000E module provides a connection through the network GPRS/LTE, and also has a GPS module. On the board is a slot for SIM card, connecting additional Arduino Shields is allowed by led out connectors.

The product is compatible with Arduino

Sample code and detailed information can be found in the user guide.

 

Connection

The board has connectors compatible with Arduino Uno, Leonardo and derivatives. To get started with the device, sufficient is to connect the module and upload to Arduino manufacturer's code example.

DFRobot Shield SIM7000E

 

Specification

  • Supply voltage: 7 V to 12 V (required)
  • Module controlled with AT commands
  • Built-in GSM/LTE/GPS SIM7000E:
    • Single band TDD-LTE B39
    • Four band FDD-LTE B3 / B8 / B20 / B28
    • GPRS/EDGE 900 / 1800 MHz
    • LTE CAT-M1 (eMTC.): 375 kbps (up), 300 kbps (down)
    • NB-IOT: 66 kbps (up), 32 kbps (down)
    • EDGE Class: 236.8 kbps (up), 236.8 kbps (down)
    • GPRS 85.6 kbps (up), 85.6 kbps (down)
    • Output power:
      • GSM900: 2
      • GSM1800: 1W
    • Current consumption:
      • Power off: 7 uA
      • PSM: 9 uA
      • Idle: 11 uA
    • Operating temperature: -40 °C to 85 °C
    • GNSS (GPS, GLONASS, BeiDou, Compass, Galileo, QZSS)
    • Firmware update via USB
    • Supports SIM card and NB-IoT card 
  • GSM antenna for U. FL connector
  • Sensor BM280:
    • Temperature measurement:
      • -40 °C to 85 °C
      • Resolution: 0.1 °C
      • Measurement error: ± 0.5 °C
    • Moisture measurement:
      • from 0% to 100% RH
      • Resolution: 0.1 % RH
      • Measurement error: ± 2% RH
      • Sampling time: 1 sec.
    • Pressure measurement:
      • from 300 hPa to 1100 hPa
    • Operating temperature: -30 ° to 85 °C
  • Board sizes: 68,6 x 53,4 mm

Set includes

  • Patch module SIM7000E
  • GSM antenna
  • GPS antenna

 

Voltage to 5.0 V
Voltage from 5.0 V
Interface UART

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

M2,5 E50 Screws and Distance Washers Set - 120pcs.

Set contains 120 pieces of elements in the form of M3 screws and nuts and different types the M2,5 distances. All is closed in a little organizer.
Index: GRL-12115
Index: GRL-12115
Waiting time: approx. 10-30 days
Regular price €15.73 Price €15.73

USB Cable A-A - 1,8m

USB type A, male - USB, type A female extension cable. Length: 180 cm
Index: KAB-02763
Index: KAB-02763
Czas oczekiwania: ok. 10-30 dni
Regular price €1.11 Price €1.11

DisplayPort cable DP - 1,8 m

Display Port allows you to connect in accordance with the standard, audio and video devices . The cable has silver-plated tips, and its length is 1.8 meters.
Index: KAB-05308
Index: KAB-05308
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.58 Price €3.58

Thumb Joystick

A joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions.
Index: SWT-01942
Index: SWT-01942
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.10 Price €1.10

FORBOT KIT - digital technology - set of elements + ON-LINE course

The course discuss the issues of digital technology dedicated to all who have a basic knowledge of electronics. During a series of articles, discussed are the main function...
Index: FOR-07362
Index: FOR-07362
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.00 Price €18.00

Set of passive electronic components + organizer

A set of electronic elements required in the design on the breadboards. Set includes i.a.: resistors, capacitors, potentiometers, buttons, and LEDs. All packed in an organizer...
Index: PAS-11726
Index: PAS-11726
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.08 Price €8.08

Transistors kit TO92 - 180pcs

A set of 18 types bipolar transistors in TO92 case, 10 pieces in each.
Index: UCC-07579
Index: UCC-07579
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.48 Price €4.48

USB A cable 0,3 m with plug 1x5

Cable with USB type A plug and a 1x5 plug, pitch of 2.54 mm (goldpin) with a length of 30 cm.
Index: KAB-01901
Index: KAB-01901
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.33 Price €1.33

AVR Programming Board

AVR Programming Board is designed for programming microcontrollers from the Atmel AVR family in cased: DIP8, DIP20, DIP28, DIP40.
Index: MOD-01357
Index: MOD-01357
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.98 Price €6.98

Tip for soldering station Elwik - conical GD-1/044

Conical tip from series GD-1, suitable for soldering station Elwik.
Index: LUT-07414
Index: LUT-07414
Czas oczekiwania ok. 10-30 dni
Regular price €4.03 Price €4.03

Tip for soldering station Elwik - conical GD-1/047

Conical tip from series GD-1, suitable for soldering station Elwik.
Index: LUT-07415
Index: LUT-07415
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.03 Price €4.03

Soldering tip for soldering station Elwik - cut on two sides GD-2/051

Soldering tip cut on two sides, series GD-2, suitable for soldering station Elwik.
Index: LUT-07416
Index: LUT-07416
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.03 Price €4.03

Products from the same category

Arduino Ethernet Shield 2 with microSD reader- A000024

Shield for Arduino allows users to easily connect to the Ethernet network. Module based on W5500, it also has a microSD card slot.
Index: ARD-03926
Index: ARD-03926
In stock, shipping 24 hours!
(Check quantity)
Regular price €25.88 Price €25.88

DataLogger Shield V1.0 RTC DS1307 with SD card reader - Shield for Arduino - Iduino ST1046

Shield for Arduino with RTC DS1307 and a slot for SD memory cards. It can be used as a data logger, it has a place for a round CR1220 battery and for additional module. It...
Index: MOD-08238
Index: MOD-08238
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.93 Price €4.93

CAN-Bus Shield v2.0 - Shield for Arduino

Shield for Arduino supporting the CAN bus. It is equipped with chips MCP2515 and MCP2551. It communicates via the SPI interface. It works with voltage of 5 V.
Index: SEE-11568
Index: SEE-11568
In stock, shipping 24 hours!
(Check quantity)
Regular price €24.53 Price €24.53

RS485/CAN - Shield for Arduino - Waveshare 10771

Shield that allows you to connect the Arduino to the RS485 interface or CAN bus. It is equipped with drivers: MAX3485 and SN65HVD230 for the CAN, it works with the Uno,...
Index: WSR-04517
Index: WSR-04517
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.43 Price €9.43

Arduino MKR GPS Shield ASX00017 - Shield for Arduino MKR

Overlay for Arduino MKR series, allows you to create projects that require GPS location determination. On the board is integrated GNSS u-blox SAM-M8Q . The device can be...
Index: ARD-16718
Index: ARD-16718
Available, 24h shipping!
(Check quantity)
Regular price €31.28 Price €31.28

DFRobot RS232 - Shield for Arduino

Shield for Arduino, which allows data transfer via popular RS232 protocol. It has installed DB9 slot.
Index: DFR-02992
Index: DFR-02992
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.65 Price €9.65

Spartan Edge Accelerator Board - Arduino FPGA shield with ESP32

Overlay for Arduino extending the module with FPGA functions with Xilinx Spartan. On the board there is also ESP32 chip enabling communication via WiFi and Bluetooth, as...
Index: SEE-15688
Index: SEE-15688
Available, 24h shipping!
(Check quantity)
Regular price €59.63 Price €59.63

DFRobot Ethernet W5200 microSD - Shield for Arduino

Module based on W5200 chip enabling Arduino users to easily connect to Ethernet network. It works with Arduino Uno and Mega 2560 and also has a microSD card reader.
Index: DFR-02990
Index: DFR-02990
Available, 24h shipping!
(Check quantity)
Regular price €22.05 Price €22.05

A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi - assembled

The module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS standard. It allows for voice chat, sending SMS messages. On the board are: two...
Index: RPI-05405
Index: RPI-05405
Czas oczekiwania: ok. 5 dni
Regular price €42.53 Price €42.53

GPS/GSM/GPRS Shield SIM808 Shield - cap for Arduino - Waveshare 11492

Cap for Arduino with SIM808 system which allows you to send text messages, create links in a GSM network, GPRS data transfer and reading of GPS position. Communication via...
Index: WSR-05623
Index: WSR-05623
In stock, shipping 24 hours!
(Check quantity)
Regular price €48.38 Price €48.38

A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi + connector for Arduino

The new version of the module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS. Based on Quectel M95, it allows for voice calls, sending SMS...
Index: ITB-10242
Index: ITB-10242
Waiting time approx. 4 weeks
Regular price €39.15 Price €39.15

IoT LoRa Node Shield 868MHz/915MHz - shield for Arduino

IoT LoRa Node Shield is an overlay dedicated to main modules with Arduino type microcontroller. The module allows to create LoRa nodes compatible with The Things Network in...
Index: SUP-14625
Index: SUP-14625
Available, 24h shipping!
(Check quantity)
Regular price €33.73 Price €33.73