Product description: SparkFun MicroMod - Artemis - DEV-16401
A smallSparkFunArtemis module based on theAmbiq Micro Apollo3processor featuring anARM Cortex-M4F clocked at 96 MHzwithBluetooth Low Energy 5.0communication that consumes up to 6uA per MHz. It has anM.2MicroModconnector so that the module can be connected to a carrier board with this connector. The board enables machine learning-based application development usingTensorFlow Lite. The board features two I2C connectors, eight GPIOs, digital, analog and PWM, as well as SPI, QuadSPI and Bluetooth. MicroMod is a modular interface in the form of modules with microcontrollers that can be easily interchanged in MicroMod M.2 interface motherboards. Modules can be easily swapped if a different communication interface is needed for a particular project.
A detaileduser guideis available on themanufacturer's websiteto make working with the SparkFun MicroMod easy.
SparkFun MicroMod Artemis.Technical specification of SparkFun Artemis module
- Flash memory: 1 MB
- RAM: 384 kB
- Clocking: 48 MHz / 96 MHz in turbo mode
- Current consumption: 6 uA / MHz
- Number of GPIO pins: 48
- Number of PWM channels: 31
- ADC: 10-channel with 14-bit precision up to 2.67 million samples per second
- 2 differential ADC channels
- Number of UARTs: 2
- Number of I2C lines: 6
- Number of SPI lines: 6
- SPI bus: 2 / 4 / 8 -bit
- PDM interface
- I2S interface
- Secure Smart Card interface
MicroMod Artemis interfaces specification
- 1x USB dedicated to programming and debugging
- 1x UART
- 2x I2C
- 1x SPI
- 1x Quad-SPI
- 8x Fast GPIO
- 2x digital pins
- 2x analog pins
- 2x PWM
- 1x differential ADC pair
- Status LED
- Vin Level ADC
MicroMod Artemis.
