- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: SparkFun Sensor Kit - set with sensors - SparkFun DEV-16156
A kit prepared by SparkFun , which includes a number of useful cognitive sensors to determine temperature, soil moisture, movement, touch, sound and much more. Each component has a Qwiic connector, which significantly simplifies and speeds up the prototyping process. The universal nature of the SparkFun Sensor Kit components allows them to be used also in other projects.
SparkFun Sensor Kit contents
| LP | PICTURE | DESCRIPTION |
|---|---|---|
| 1 |  | Environmental Combo CCS811 / BME280 - QWIIC weather station - SparkFun SEN-14348 |
| 2 |  | Sound detector - microphone - SparkFun SEN-12642 The sound detector is supplied with the voltage ranging from 3.5 V to 5.5 V. The board also has a Rail-to-Rail signal amplifier - the LMV324 system. |
| 3 |  | APDS-9960 RGB sensor and gesture detector 3.3V I2C - SparkFun SEN-12787 The module, which measures the intensity of the ambient light, enables detecting the proximity of an object and detects hand gestures. With the help of this sensor, you can control devices with a wave of the hand. |
| 4 |  | ICM-20948 9DoF - 3-axis accelerometer, gyroscope and magnetometer I2C / SPI Qwiic - SparkFun SEN-15335 Combination of a 3-axis gyro, accelerometer and compass. It allows you to measure acceleration, magnetic field and angular velocity in configurable ranges. |
| 5 |  | SparkFun Capacitive Touch Slider - CAP1203 touch sensor - capacitive - Qwiic - SparkFun SEN-15344 Module with a capacitive touch sensor based on the CAP1203 chip. It has three touch points that can be used as three separate sensors or as a single slider. |
| 6 |  | SparkFun Soil Moisture Sensor - soil moisture sensor - with screw terminals - SparkFun SEN-13637 Soil moisture sensor with screw clamps and analog signal at the output. |
| 7 |  | Goldpin strip 1x40 pin - 2.54 mm raster |
| 8 |  | IR diode TSOP38238 - SparkFun SEN-10266 Receiver in the form of an IR diode, which can be used in any project for remote control. |
| 9 |  | 1 MOhm 1/4 W PTH resistor |
| 10 |  | 0.25 '' magnet - SparkFun COM-08643 Magnet made of neodymium / iron / boron (NdFeB). Used as a trigger for reed switches. It is also an interesting solution for attaching tools to a metal workbench. |
| 11 |  | IR LED - 950 nm Diode operating in the 950 nm band. |
| 12 |  | Optical detector / phototransistor - QRD1114 - SparkFun SEN-00246 The optical detector uses an infrared emitting diode in conjunction with an infrared photo transistor to detect the reflected infrared signal. |
| 13 |  | Photoresistor A photoresistor is a photosensitive element whose resistance decreases under the influence of incident radiation and does not depend on the direction of the applied voltage, just like the resistance of a conventional resistor. |
| 14 |  | Reed switch It senses magnetic fields, making it a great non-contact switch. |
| 15 |  | FSR pressure sensor The module detects pressure on any area in the range from 100 g to 10 kg. Its diameter is 0.5 ''. |
| 16 |  | Deflection sensor 73x6.3mm - SparkFun SEN-10264 The sensor can be used to detect hand movements, e.g. clenching a fist, and is useful for detecting movement or positioning. |
| 17 |  | Qwiic female-female cable with 4-pin plug - 10cm - SparkFun PRT-14427 4-pin cable with a length of 10 cm. Ended on both sides with JST Qwiic 4-pin plug, raster 1 mm. |
| 18 |  | Piezoelectric vibration sensor with mass - SparkFun SEN-09197 Piezoelectric vibration sensor used for measuring touch, shock vibration and flexibility. |
| 19 |  | PIR motion sensor - JST connector - SparkFun SEN-13285 It is used to detect objects in rooms in alarm and lighting systems. |
| 20 |  | SoftPot membrane potentiometer - 50 mm Thin 50 mm long variable potentiometer. |
| 21 |  | Resistor 330 Ohm 1/4 W PTH - 20 pcs |
| 22 |  | Resistor 10 kOhm 1/4 W PTH - 20 pcs |
