- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
A module made by Seeedstudio is equipped with the ATmega328 microcontroller. It has special slot for XBee modules. The distribution of pins is compatible with the Arduino Uno. Built-in chip allows you to charge the Lipol battery after connecting it to the solar panel. On board is also a real-time clock RTC, as well as a device for reading microSD cards.
Key features
- Microcontroller ATMega328 operating at voltage of 3.3 V at 8 MHz
- Built-in RTC module with battery - real-time clock
- The distribution of connectors is compatible with the Arduino so the shields will work correctly
- Special connectors allow, for example, to connectthe XBee module
- System of charger allows you to charge rechargeable lipol 3,7 V batteries
|
The manufacturer provides a detaileduser manual. |
In addition to the basic connectors known from the Arduino, on the board are: slot for the XBee moduleand plugs for connection of the popular communication buses.
Programming
To upload the software, required is an USB - UART adapter. Detailed description of driver installation and programming the device, is available inthe user's guide.
Specification
- The module is compatible with Arduino Uno
- Embedded microcontroller: ATmega328P 8MHz
- Works with a voltage of 3.3 V
- Real time clock RTC DS1337S together with CR1220 battery
- The system of charging the lipol CN3065
- Step-down TD6810 regulator
- Slot for microSD cards
- 2 4-pin Grove connectors
- UartSBee connector for programming the board
- 2 Reset buttons - for XBee modules and for Atmega328P
- EBee module slot
- Communication: I2C, UART, SPI
- It is programmed in the Arduino IDE like Arduino Pro or Pro Mini (3.3 V, 8 MHz)
- Dimensions: 87 x 61 mm
|
The device operates with a voltage of 3.3 V. |
Useful links |
