3E Model Max Force 850 mAh 7.4V 15C

Package LiPol 3E Max Force 850 mAh 15C 2S 7.4V

Index: AKU-00827

Capacity: 850 mAh .Nominalvoltage: 7.4 V. Max.discharge current: Dimensions:58x29x17mm.Weight: 49 g.

€8.51
€6.92 tax excl.

Unavailable
Discontinued product
30-day returns

Attention!

The 3E Model series has been replaced by Redox batteries .

Specification

  • Nominal voltage: 7,4 V
  • Capacity: 850 mAh
  • Discharge current: 15C(12.75 A)
  • Plug: BEC + output for cell balancer
  • Dimensions: 58 x29 x 17 mm
  • Weight: 49 g

The most powerful Max Force package series from 3E Model. Lithium-polymer cells with output to the cell balancer, with increased discharge current.

In our offer there are also chargers and JST sockets matched to the packet connectors.

Attention!

  • Do not discharge below 3V/cell.
  • Li-POL batteries require chargers that support Li-pol cells/packages charging process.
  • Do not charge (applies to all Li-Pol types) with ordinary chargers that do not have dedicated charging algorithm for this type of batteries.
  • Use only with regulators that enable work with Li-Ion/Li-Pol batteries.
  • Do not store with other conductive materials (short circuit possibility)!
  • Do not dismantle packages and cells, do not pull out of the protective foil.
  • Do not leave unattended during charging.
  • In case of mechanical damage to the cell - DO NOT USE!


Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Li-Pol charger with balancer REDOX Beta Combo + power supply

Loader/unloader with built-in cell balance. Supports LiPo, LiIon and LiFe, NiCd, NiMH and Pb cells and packages. It also comes with a power supply, allowing direct...
Index: AKC-00557
Index: AKC-00557
Unavailable
Regular price €30.00 Price €30.00

Charger Li-Pol / Li-Fe / Li-Ion / Ni-CD / Ni-MH with balancer - Redox Alpha V2

Charger/discharger for packages: LiPo, LiFe, LiIon, NiCDi  NiMH with built-in balancer of links Redox Alpha.
Index: AKC-00646
Index: AKC-00646
In stock, shipping 24 hours!
(Check quantity)
Regular price €26.26 Price €26.26

Bag for LiPo packages 200 x 180 mm (small)

Bag for safe storage of lithium-polymer packages with dimensions: 200 x 180 mm.
Index: AKC-00825
Index: AKC-00825
Unavailable
Regular price €8.14 Price €8.14

Charger Li-Pol R-Planes - Pioneer

Battery charger for 7.4 - 11.1 V LiPo packages supplied with 9 - 16 V DC.
Index: AKC-00833
Index: AKC-00833
Waiting time: about 10-30 days
Regular price €13.72 Price €13.72

Customers who bought this product also bought:

Mini DC Motor MT64 3-6V

Small metal motor powered from 3 V-6 V. Idle current 30 mA/ 3 V. Dimensions: 11.9 x 15.3 mm. Speed: approx. 14 000 rpm.
Index: MOT-00949
Index: MOT-00949
Available, 24h shipping!
(Check quantity)
Regular price €1.28 Price €1.28

Simple line follower set

The kit includes electronic components to create a controller for a simple line follower racing robot. An on-line course on how to create a robot step by step is included.
Index: ROB-00184
Index: ROB-00184
Unavailable
Regular price €10.47 Price €10.47

Mini-drill with accessories

The drill is ideal for work in electronics such as: drilling, milling, making holes in printed circuit boards, etc. Powered by 12 V.
Index: NSZ-00665
Index: NSZ-00665
Unavailable
Regular price €5.79 Price €5.79

Universal multimeter UNI-T UT55

The multimeter enables to measure DC and AC voltage, flow of DC and AC current, resistance, capacitance, frequency and temperature. The device has the function of testing...
Index: UPM-01119
Index: UPM-01119
In stock, shipping 24 hours!
(Check quantity)
Regular price €25.35 Price €25.35

AVR 2 programmer compatible with USBasp ISP

Programmer AVR USBasp 2 is fully compatible with the USBasp programmer. It can be used to program microcontrollers from the AVR family via the USB port. Version 2 has two...
Index: MOD-01317
Index: MOD-01317
In stock, shipping 24 hours!
(Check quantity)
Regular price €12.30 Price €12.30

IDC 6 pin female-to-female cable - 30 cm

Universal female cable with the length of 30 cm, ended with the  6-pin  IDC slots with the pitch of 2.54 mm (standard goldpin), which can be used to create different...
Index: KAB-01246
Index: KAB-01246
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.53 Price €0.53

IDC 10 pin female-female - 30cm

Universal female cable with the length of 30 cm, ended with the 10-pin IDC slots with the pitch of 2.54 mm (standard goldpin) which can be used to create different connections.
Index: KAB-01051
Index: KAB-01051
Czas oczekiwania: ok. 10-30 dni
Regular price €0.63 Price €0.63

Gray ribbon cable (50 cm) IDC raster 1.27mm

IDC 10-wire ribbon cable. Raster: 1.27 mm.
Index: KAB-00136
Index: KAB-00136
Unavailable
Regular price €0.23 Price €0.23

Drill 0,8mm - 10pcs

A set of 10 drills for metal and hole making in printed circuit boards.
Index: NSZ-00233
Index: NSZ-00233
Waiting time: about 10-30 days
Regular price €2.30 Price €2.30

Drill 0,7mm - 10pcs

A set of 10 drills for metal and hole making in printed circuit boards.
Index: NSZ-00232
Index: NSZ-00232
Available, 24h shipping!
(Check quantity)
Regular price €2.21 Price €2.21

Drill 1,0mm - 10pcs

A set of 10 drills for metal and hole making in printed circuit boards.
Index: NSZ-00234
Index: NSZ-00234
Available, 24h shipping!
(Check quantity)
Regular price €1.14 Price €1.14

Drill 0,5mm - 10pcs

A set of 10 drills for metal and hole making in printed circuit boards.
Index: NSZ-00598
Index: NSZ-00598
Available, 24h shipping!
(Check quantity)
Regular price €2.30 Price €2.30

Products from the same category

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98

Micro-Match connector - 10 pin socket

Micro-Match connector for 10-pin printing.
Index: UCC-00283
Index: UCC-00283
Unavailable
Regular price €0.21 Price €0.21

Micro-Match connector for 10-pin tape

Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.
Index: UCC-00285
Index: UCC-00285
Unavailable
Regular price €0.91 Price €0.91

Pololu LPY550AL 2-axis XZ gyroscope

A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
Unavailable
Regular price €15.12 Price €15.12

3-axis magnetometer, digital MAG3110

3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.
Index: SES-00964
Index: SES-00964
Unavailable
Regular price €1.86 Price €1.86

HiTechnic color sensor - for Lego Mindstorms EV3 and NXT

The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.
Index: ROB-00982
Index: ROB-00982
Unavailable
Regular price €55.58 Price €55.58

Servomechanism - Lego Mindstorms NXT

The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.
Index: ROB-00986
Index: ROB-00986
Unavailable
Regular price €32.33 Price €32.33

USB Bluetooth adapter - Lego Mindstorms NXT

Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.
Index: ROB-00987
Index: ROB-00987
Unavailable
Regular price €39.30 Price €39.30

Gift voucher - PLN 50

Gift certificate worth PLN 50.
Index: BON-01044
Index: BON-01044
Unavailable
Regular price €11.63 Price €11.63

Gift Card - 300zł

Gift certificate worth PLN 300.
Index: BON-01045
Index: BON-01045
Unavailable
Regular price €69.77 Price €69.77

Receiver module GPS-FGPMMOPA6H GPS

Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.
Index: UCC-01233
Index: UCC-01233
Unavailable
Regular price €23.23 Price €23.23

Bluetooth antenna ANT9520-245

Internal Bluetooth antenna, ZigBee, WLAN in SMD housing. Works on the frequency: 2.45 GHz in 200 MHz, 1.5 dBi band. Dimensions of the housing are 9.5 x 2.0 x 1.0 mm .
Index: SES-01263
Index: SES-01263
Unavailable
Regular price €0.58 Price €0.58