Product description: Fibaro Bypass 2 - intelligent Z-Wave Plus executive module - black - FGB-002
Fibaro Bypass 2 is a module that works with Fibaro Dimmer 2 (FGD-212) and Fibaro Walli Dimmer (FGWDEU-111) lighting dimmers, enabling smooth lighting management in a smart home environment. This device is a key component when using LED or energy-saving CFL bulbs. The Fibaro executive module allows you to repair problems related to glowing and flickering of LED light and CFL fluorescent lamps, which are the result of these light sources operating at too low power consumption. Therefore, the module allows you to lower the minimum power requirements that must be met by light dimmers in order for them to work properly. This allows dimmers to work with light sources with low power consumption of less than 5 VA.
Fibaro Bypass 2 - intelligent Z-Wave Plus executive module - black - FGB-002.
The module eliminates lighting problems for light sources with power consumption lower than 5 VA.
Main features of the device
- Works with Dimmer 2 and Walli Dimmer devices
- Improves the performance of LED lighting and CFL fluorescent lamps
- Lowers the minimum power consumption requirements of light dimmers, eliminating lighting problems with light sources below 5 VA
- Operates in falling edge mode
- Sensitive to dynamic changes in lighting brightness
- Designed for installation in a flush-mounted or surface-mounted box and in a wall switch
Cooperation with a light dimmer
Installing the Bypass 2 module involves connecting it to the Fibaro Dimmer 2 lighting dimmer in accordance with the instructions , placing it in an appropriate place and restoring the power supply after turning it off. It is intended for installation in a wall switch, in a flush-mounted or surface-mounted box. You should also remember to configure the devices after connecting them using the button in accordance with the manufacturer's guidelines. Installation requires electrical skills and should always be done with care.
Additional features of the module
The executive module operates only in the falling edge mode and is not compatible with the rising edge mode . You should also avoid too frequent changes in lighting brightness, because the module is sensitive to dynamic changes. It also ensures the stability and efficient operation of LED lighting and CFL lamps.
Technical specifications of the device
- Producer: Fibaro
- Model: Bypass 2
- Product code: FGB-002
- Power supply: 100 V to 240 V AC, 50 / 60 Hz
- Rated current: 5 A
- Operating temperature: 0°C to 35°C
- Power consumption: <1.4W
- Mobile application: FIBARO
- Voice assistant: Google Assistant, Amazon Alexa
- Product color: black
- Dimensions: 31 x 21.6 x 13 mm
The Dimmer 2 light dimmer with the connected Bypass 2 module connects to the smartphone via the Z-Wave network gateway.
Z-Wave Plus device compatibility
Z-Wave Plus is a developed version of the international Z-Wave wireless communication protocol, used in smart home systems. Z-Wave Plus introduces several key improvements that increase the reliability, performance and functionality of this protocol. Z-Wave Plus ensures reliable communication by confirming all messages in two directions every time. It enables a greater communication range, which means that devices can be separated from each other over a greater distance without loss of signal quality. It is also more energy-efficient and safer than the previous version. Despite these improvements, Z-Wave Plus is backwards compatible with Z-Wave devices, which means new and older devices can work together in one system.
Useful links |
