- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Cap, type Hat, for Raspberry Pi 4B, 3 B+ ,3 B and 2 B with RCA connector and BNC. Used in high quality device, system DigiOne with the S/PDIF interface. System used in device, has a resolution of 24-bits, runs at a speed of 192 kHz. The device has a very small deviation of jitter, and low noise. The device has galvanic isolation
The subject of the sale is the cap DigiOne, minicomputerRaspberry Pimust be purchased separately.
What distinguishes DigiOne
Cap DigiOne is characterized by a system having a resolution of 24 bits, which works with a frequency of 192 kHz. The cap is equipped with two connectors: RCA and BNC, have jitter, which is only 0.6 PS (picoseconds), and the noise was significantly reduced to 50 uV (batteries have noise in the amount of about. 12 uV).
|
DigiOne does not require additional power, the entire system works by using the GPIO of the Raspberry. The module is only compatible with the Raspberry Pi. Does not work with Sparky, Cali, Isolator. |
Specification
- DigiOne 1.3
- Interface: S/PDIF
- Chip: WM8805
- Sampling rate: from 32 kHz to 192 kHz
- Screen resolution: 16 bit to 24 bit
- Jitter: 0,6 PS
- Noise: 50 uV
- Connectors: RCA and BNC
- Communication: I2S
- Galvanic isolation
- Dual oscillator NDK with low jitter deviation
- Connected to the GPIO pins of the Raspberry Pi
Useful links
|
