In 2012, the first generation of Raspberry Pi appeared, and the entire world of programmers and DIY enthusiasts learned about Raspberry. It attracted the enthusiasts of robotics, as well as those who are interested in advanced technology. In 2019, the fourth edition of Raspberry Pi was released. This event caused a stir in the electronics and robotics community, as the Raspberry Pi 4B is even more powerful, works faster and its systems are better adapted to work under heavy loads. Moreover, it can be equipped with cameras that will create an intelligent monitoring system based on the Raspberry Pi. We offer a wide range of cameras for Raspberry Pi, as well as useful accessories, necessary for building modern monitoring systems. It is widely used in public places and commercial buildings, everywhere where increased protection against possible burglary and theft is needed. More and more often the owners of single-family houses decide on CCTV systems with cameras. You can create it yourself, using Raspberry Pi microcomputer, cameras and numerous accessories.
Air quality gauge Benetech GM8803 PM2.5 and PM10 with display
Index: BNT-10775
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Waterproof probe with temperature sensor DS18B20 SENT0002 - 2m
Index: DNG-19516
- Reduced price
- Promotion
Raspberry Pi cameras
Loading...
Raspberry Pi camera tape 22-core 0,5mm raster - 15-core 1mm raster - 20cm
Raspberry Pi cable, 20 cm long, intended for connecting cameras with a 15-pin connector, 1 mm pitch, to the Raspberry Pi 5 minicomputer with 22-pin connectors, 0.5 mm pitch...
Index: RPI-23927
Index: RPI-23927
Raspberry Pi display tape 22-core 0,5mm raster - 15-core 1mm raster - 50cm
The 50 cm long Raspberry Pi cable allows you to connect displays with a 15-pin connector with a 1 mm pitch to the Raspberry Pi 5 minicomputer, which has 22-pin connectors...
Index: RPI-23932
Index: RPI-23932
- Reduced price
- Promotion
Raspberry Pi camera tape - 20cm 15-core 1mm raster
Tape with a length of 20 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-01908
Index: RPI-01908
Raspberry Pi display tape 22-core 0,5mm raster - 15-core 1mm raster - 30cm
A dedicated 30 cm long ribbon for Raspberry Pi allows you to connect displays with a 15-pin connector with a 1 mm pitch with the Raspberry Pi 5 minicomputer, which is...
Index: RPI-23931
Index: RPI-23931
- Reduced price
- Promotion
Raspberry Pi tape - camera 75cm 15 wires 1mm raster
Tape with a length of 75 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-02931
Index: RPI-02931
Raspberry Pi Camera HD v3 12MPx - original camera for Raspberry Pi
The third installment of the official Raspberry Pi camera, which can be connected directly to the connector of the minicomputer. The module is equipped with a Sony IMX708...
Index: RPI-22478
Index: RPI-22478
Raspberry Pi tape - camera 100cm 15 wires 1mm raster
Tape with a length of 100 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-03949
Index: RPI-03949
Raspberry Pi display tape 22-core 0,5mm raster - 15-core 1mm raster - 20cm
A special 20 cm long tape for Raspberry Pi allows you to connect displays with a 15-pin connector with a 1 mm pitch to the Raspberry Pi 5 minicomputer, which has 22-pin...
Index: RPI-23930
Index: RPI-23930
Raspberry Pi Camera HD v2 8MPx - original camera for Raspberry Pi
The second version of the popular camera connected to a special minicomputer Raspberry Pi connector, version4, 3, 2, B+. The device has a matrix with a resolution of 8 Mpx,...
Index: RPI-06124
Index: RPI-06124
Raspberry Pi camera tape - 5cm 15-core 1mm raster
Tape with a length of 5 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-01907
Index: RPI-01907
Raspberry Pi camera tape 22-core 0,5mm raster - 15-core 1mm raster - 50cm
A special 50 cm long Raspberry Pi tape allows you to connect cameras with a 15-pin connector with a 1 mm pitch to the Raspberry Pi 5 minicomputer, which has 22-pin...
Index: RPI-23929
Index: RPI-23929
OdSeven Camera HD camera OV5647 5Mpx - for Raspberry Pi
Camera module with OV5647 sensor connected to a corresponding connector on a minicomputer Raspberry Pi in versions 4B, 3B+, 3B, 3, 2, B+, A+ and above A and B. The device has a...
Index: ODS-05619
Index: ODS-05619
Raspberry Pi camera tape 22-core 0,5mm raster - 15-core 1mm raster - 30cm
The 30 cm long tape dedicated to Raspberry Pi is used to connect cameras with a 15-pin connector with a 1 mm pitch to the Raspberry Pi 5 minicomputer, which has 22-pin...
Index: RPI-23928
Index: RPI-23928
Raspberry Pi Camera HD v3 Wide 12MPx - original camera for Raspberry Pi
Wide-angle version of the third installment of the official Raspberry Pi camera. The module can be connected directly to the Raspberry Pi minicomputer connector. The camera is...
Index: RPI-22480
Index: RPI-22480
Raspberry Pi NoIR Camera HD v3 12MPx - original camera for Raspberry Pi
Raspberry Pi NoIR Camera HD v3 is a camera module that is not equipped with an IR filter. The camera without the IR filter allows you to record images after dark and in very...
Index: RPI-22479
Index: RPI-22479
- Reduced price
- Promotion
Raspberry Pi camera ribbon wire - 45cm 15 wires 1mm raster
Tape with a length of 45.7 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-02442
Index: RPI-02442
CSI / DSI Extender Thingy for Raspberry Pi camera/display tapes - Adafruit 3671
The board is a great tool that allows you to extend the tape 15-pin pitch of 1 mm CSI for camera or DSI display Raspberry Pi.
Index: ADA-10318
Index: ADA-10318
Raspberry Pi camera tape - 10cm 15-core 1mm raster
Tape with a length of 10 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-01905
Index: RPI-01905
Raspberry Pi Global Shutter Camera IMX296 1,5Mpx - for Raspberry Pi
The official Raspberry Pi camera with Global Shutter is based on the Sony IMX296 sensor with a resolution of 1.5 Mpx, 1456 x 1088 px . Works with the same lenses as the...
Index: RPI-22626
Index: RPI-22626
Raspberry Pi tape - camera 200cm 15 wires 1mm raster
A 200cm long ribbon connecting a Raspberry Pi minicomputer to a dedicated camera . The connector has 15 wires, 1 mm raster.
Index: ODS-03952
Index: ODS-03952
Camera Raspberry Pi HQ IMX477R 12,3 MPx for Raspberry Pi
High quality camera for Raspberry Pi with higher resolution and frequency than the official Raspberry Pi v2. It has been designed to work with various C- and CS-mount lenses ....
Index: RPI-16332
Index: RPI-16332
Raspberry Pi camera tape - 50cm 15 wires 1mm raster
Tape with a length of 50 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: ODS-02961
Index: ODS-02961
The PT361060M3MP12 CS mount lens - wide angle 6 mm for Raspberry Pi camera
PT361060M3MP12 lens with CS mount. It has 3 MPx resolution and 6 mm focal length. The angle of view of the lens is 63°. The image format is 1/2" and its aperture is F1.2....
Index: RPI-16334
Index: RPI-16334
M12 lens 3,56mm with adapter for Raspberry Pi camera - ArduCam LN033
Lens with 3.56 mm focal length and 90° viewing angle. It has been equipped with M12 mount and CS Mount adapter, so it also cooperates with Raspberry Pi HQ camera.
Index: ACM-17070
Index: ACM-17070
See also
Cameras and lenses for the Raspberry Pi 4B system
The identical appearance of the Raspberry Pi 4B module compared to the previous version is only an appearance. The new version is a new, much more efficient Broadcom 2711 processor, which is equipped with a stable system with four 64-bit cores that can operate at a frequency of up to 1.5 GHz. Much larger memory and much faster operating memory have been added. The device, affectionately called "malinka", is available in versions with 1GB, 2GB or 4GB memory. We also improved the communication interface and much more efficient graphics. This is of great importance if you intend to connect a camera to the Raspberry Pi 4B. Thanks to this, the image will be of much better quality, and ripping to other media will take much less time.
Modern cameras for Raspberry Pi 4B
Our offer includes a wide selection of camera modules for Raspberry Pi 4B, which, depending on the device version, can record images in very high resolutions and HD quality. Some modules are also sensitive to infrared light without filtration, which guarantees recording in very dark rooms, as well as at night. The cameras offered in our store work with all versions of Raspberry Pi computers and are very easy to install. Depending on the purpose of the device, you should focus on the size of the matrix, the degree of adjustment of the lens focal length, the maximum resolution of the sensor and the maximum viewing angle. A well-selected camera module with a lens allows you to record high-resolution images for a monitoring system, an additional camera for a drone or special systems for scientific or technical experiments.
Lenses, tapes and housings for devices with Raspberry Pi
Our offer includes high-class lenses that will allow you to record video or take high-quality photos in camera modules for Raspberry Pi 4B. The device can be installed quickly thanks to simple mounting holes, which also allow you to connect the power supply to the backlight diodes. In our store, you can also buy special accessories for your new camera, which will allow you to efficiently adjust the image sharpness using special lenses, and special USB caps that will greatly facilitate the cooperation of Raspberry Pi units with camera modules. Special tapes with adapters will facilitate installation and allow you to mount the camera up to 300 mm from the unit itself.
Cameras for Raspberry Pi - FAQ
For basic applications, a small plate camera will be perfect, e.g. the OdSeven Camera HD OV5647 5Mpx module. If you care about excellent optical quality and flexible configuration options, choose a product with an interchangeable lens - such as the ArduCam OV5647 5Mpx camera with HX-27227 lens (M12x0.5 mount).