• EOL

Metro Express M0 32-bit - compatible with Arduino and CircuitPython - Adafruit 3505

Index: ADA-09079 EAN: 5904422337551

The module is compatible with Arduino, based on the ATSAMD21G18 system. Designed to use with CircuitPython, a program that connects Python language with microcontrollers. It has 25 digital inputs/outputs, 20 PWM channels, 12 analog inputs, as well as popular communication interfaces. This version works with a voltage of 3.3 V, it has a microUSB connector for programming.

Metro Express M0 32-bit - compatible with Arduino and CircuitPython - Adafruit 3505
€37.00
€30.08 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Adafruit

Attention!

The product has been discontinued. Check other products in category.

Description

The module is compatible with Arduino, based on the ATSAMD21G18 system. Designed to use with CircuitPython, a program that connects Python language with microcontrollers. It has 25 digital inputs/outputs, 20 PWM channels, 12 analog inputs, as well as popular communication interfaces. This version works with a voltage of 3.3 V, it has a microUSB connector for programming.

 

Power

The module can be powered via microUSB cable and an external device, for example, the AC adapter, the battery or the rechargeable battery. Switching the power sources is automatic. The power supply is connected to a standard DC slot. Rechargeable battery or other source should be connected to the pins of the POWER connector.

 

Programming

The module has a UF2 bootloader. The system displays it as an external mass storage so in order to upload new firmware, just drag the software. There is no need to use additional tools. In this way, you can load the CircuitPythonprograms. The module can be programmed using the Arduino IDE. For this, you will need to configure the software in a way described by the manufacturer and connect the board using the microUSB cable. The settings of the Arduino IDE are available on the website of the manufacturer.

 

Specification

  • ATSAMD21G18 ARM Cortex M0+ 3.3 V microcontroller:
    • Flash memory: 256 KB
    • SRAM: 32 KB
    • Clock frequency: internal oscillator 48 MHz
  • Flash memory: additional 2 MB chip
  • Installed Arduino bootloader
  • Works with a modified version of the Arduino IDE
  • MicroUSBconnector for programming, in our offer, you will findthe appropriate wire
  • Installed 3.3 V voltage regulator with current delivery of up to 500 mA
  • Built-in oscillator 32.768 kHz
  • 25 GPIO pins
  • 20 PWM pins
  • 6 analog inputs
  • 1 x analog output
  • Serial interfaces: UART, SPI, I2C
  • Built-in NeoPixel on pin #40
  • External interrupts
  • Connector: microUSB connector (cablesold separately)
  • Soldered ISP connector
  • Dimensions: 53 x 71 mm
  • Weight: approx. 20g

 

Voltage output from 3.3 V
Output voltage to 3.3 V
Nominal output voltage 3.3 V
UC - Microcontroller ATSAMD21G18
UC - Core 32-bit ARM Cortex M0
UC - Flash 256 kB
UC - RAM 32 kB
UC - core 1. Single Core
UC - Digital pins 20
UC - analog in 12
UC - freq 48 MHz
UC - A/C 12-bit
UC - C/A 1
UC - PWM 20
UC - USB microUSB
UC - I2C yes
UC - UART yes
UC - SPI interface yes
Package width 10.5 cm
Package height 1.5 cm
Package depth 5 cm
Package weight 0.03 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: