Feather M0 Bluefruit LE 4.1 - compatible with Arduino - Adafruit 2995

Index: ADA-06572 EAN: 5904422354480

A small module with a microcontroller with ARM Cortex M0 known from the Arduino Zero with built-in Bluetooth 4.1 BLE. Feather is designed for portable projects. On board is a connector microUSB, through which the system can be programmed via the Arduino IDE.

Feather M0 Bluefruit LE 4.1 - compatible with Arduino - Adafruit 2995
€37.17
€30.22 tax excl.
Available
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: Adafruit

Description

A small module with a microcontroller with ARM Cortex M0 known fromArduino M0. Feather is designed for portable projects. Thanks to the microUSB connector and uploaded bootloader, the module can be programmed directly fromthe Arduino IDE environment. Board has a small size (51 x 23 x 8 mm) and can be powered by voltage from USB port or rechargeable battery3,7 V LiPol. The module has built-in Bluetooth BLE4.1 so it can become the control center of a wireless network.

 

Check out how to start playing with the Adafruit Feather!

Mobile projects

Controller Feather is designed for mobile projects. Thanks to the integrated connector, it is possible to power it from the rechargeable LiPol battery 3.7 V. The battery voltage was led through an analog pin, so you can constantly monitor the state of charge of the lipol. Also available is powering from the microUSB port.

 Adafruit Feather M0 Bluefruit LE 4.1

Programming (Arduino IDE)

The module can be programmed using the Arduino IDE. For this, you will need to configure the software in a way provided by the manufacturer and connect the board using the microUSB cable.The settings of the Arduino IDE are available on the website of the manufacturer.

The manufacturer also provides software for smartphones to communicate with the module:

Specification

  • Supply voltage: lipol 3.7 V or USB 5 V slot
  • ATSAMD21G18 ARM Cortex M0 3.3 V microcontroller:
    • Flash memory: 256 KB
    • SRAM: 32 KB
    • Clock frequency: internal oscillator 48 MHz
  • Built-in Bluetooth BLE 4.1
  • Driver: Bluetooth Nordic nRF51822 system
  • Installed Arduino bootloader
  • Works with a modified version of theArduino IDE
  • ConnectormicroUSBfor programming, in our offer, you will find the necessary wire
  • Installed voltage regulator 3.3 V with current delivery up to 500 mA
  • Power supply from USB port or with a lipol battery 3.7 V
  • 20 GPIO pins
  • 8 PWM pins
  • 10 analog inputs (one for the battery voltage measurement)
  • Interfaces: UART, I2C, SPI
  • Built-in lipol charging module 100 mA with LED indicator, which informs about the status
  • LED for pin 13
  • The reset button
  • Included are goldpin strips for self-soldering
  • Dimensions: 51 x 23 x 8 mm
  • Weight: approx 5.7 g

Voltage to 5.0 V
Voltage from 5.0 V
Voltage output from 3.3 V
Output voltage to 3.3 V
Nominal output voltage 3.3 V
UC - Microcontroller ATSAMD21G18
UC - Core 32-bit ARM Cortex M0
UC - Flash 256 kB
UC - RAM 32 kB
UC - core 1. Single Core
UC - Digital pins 20
UC - analog in 10
UC - freq 48 MHz
UC - PWM 8
UC - USB microUSB
UC - Bluetooth yes
UC - I2C yes
UC - UART yes
UC - SPI interface yes

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

You might also like

FeatherWing datalogger - RTC PCF8523 + microSD Shield for Feather - Adafruit 2922

The module is powered via battery and with the real-time clock RTC PCF8523 and a slot for microSD memory cards. FeatherWing extends the capabilities of the modules from Feather...
Index: ADA-05591
Index: ADA-05591
Available
Check quantity
Regular price €13.00 Price €13.00

Customers who bought this product also bought:

Set of CF THT 1/4W described resistors - 160pcs.

A set of 16 values of through hole resistors of 0,25 W with the tolerance of 5 %, 10 pieces each. The elements are signed, what facilitates finding the desired value.
Index: PAS-04322
Index: PAS-04322
Available
Check quantity
Regular price €1.50 Price €1.50

Female socket extended 1x8 raster 2,54mm for Arduino - 5pcs

8-pin female strap that allows you to extend the Arduino connectors. Raster: 2.54 mm. Price of 5 pcs female strap.
Index: SPF-01848
Index: SPF-01848
Available
Check quantity
Regular price €1.71 Price €1.71

Female socket extended 1x6 raster 2,54mm for Arduino

6-pin female connector strip, allows you to extend the Arduino connectors. Raster: 2.54 mm.
Index: SPF-01849
Index: SPF-01849
Available
Check quantity
Regular price €0.41 Price €0.41

Akyga Li-Pol cell 250mAh 1S 3,7V - connector JST-BEC + socket - 30x20x5mm

Akyga's battery is made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 250 mAh. It is characterized by high energy density, small...
Index: AKU-06046
Index: AKU-06046
Available
Check quantity
Regular price €3.67 Price €3.67

Plastic case Kradex Z15 - 148x250x90mm black

Four-part housing designed for storing electronic circuits. The material from which the housing is made is  polystyrene . The kit includes screws needed to assemble the...
Index: KDX-05774
Index: KDX-05774
Available
Check quantity
Regular price €5.62 Price €5.62

Mini switch Slide MOSFET LV 2-20V/6A - with protection before reverse current - Pololu 2810

The executive module with a MOSFET transistor with a pair of channels P to control devices with higher current consumption than allowed by the control system, for example, a...
Index: PLL-04852
Index: PLL-04852
Available
Check quantity
Regular price €5.62 Price €5.62

Plastic case Kradex Z3 - 110x150x70mm black

Four-part, universal housing designed for storing electronic circuits. The product was made of polystyrene. For mounting the housing, use the mounting screws included in the...
Index: KDX-05747
Index: KDX-05747
Delivery scheduled for 2022-08-30
Regular price €3.02 Price €3.02

Feather Bang ESP8266 wi - fi module, GPIO, ADC - Adafruit 2821

Wi-fi module, based on ESP8266. On board are 9 GPIO ports with support for I2C and SPI, analog input and a connector of a lipo battery of 3.7 V. It has NodeMCU software that...
Index: ADA-05294
Index: ADA-05294
Available
Check quantity
Regular price €21.69 Price €21.69

Akyga Li-Pol cell 2200mAh 1S 3,7V - cable 50mm - 59x37x9mm

Akyga brand battery made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 2200 mAh. High energy density, slow self-discharge, small...
Index: AKU-06034
Index: AKU-06034
Delivery scheduled for 2022-08-31
Regular price €6.49 Price €6.49

Li-Pol single cell charger 1S 3,7V microUSB - SparkFun PRT-10217

Simple charger for 1-purpose lithium-polymer batteries with a nominal voltage of 3.7V. The circuit is powered via a micro USB connector with a cable.
Index: SPF-01705
Index: SPF-01705
Available
Check quantity
Regular price €10.18 Price €10.18

Linear voltage regulator LDO 3,3V LM1117MP - SMD SOT223 - 5pcs

Low-Dropout linear stabilizer. Output voltage: 3,3V. Maximum output current: 0.8A. Housing: SOT223 . Includes 5 stabilizers.
Index: UCC-01118
Index: UCC-01118
Available
Check quantity
Regular price €1.17 Price €1.17

Linaer voltage regulator LDO 3,3V LF33CV - THT TO220 - 5pcs

The LDO LF33CV stabilizer is used to supply circuits operating at 3.3 V. Maximum output current is 0.5 A. Price for 5 pcs.
Index: UCC-00126
Index: UCC-00126
Available
Check quantity
Regular price €4.45 Price €4.45

Products from the same category

PyBadge Starter Kit - mini console - Adafruit 4623

Portable game console from Adafruit. The kit includes a mini PyBadge console, battery, USB cable and a comfortable lanyard with a double hook. The console can be programmed...
Index: ADA-18493
Index: ADA-18493
Available
Check quantity
Regular price €54.03 Price €48.63
  • Reduced price
  • Promotion

Adafruit QT Py ESP32-C3 WiFi - WiFi module with STEMMA QT/Qwiic connector - Adafruit 5405

The small QT Py module is equipped with a single-core ESP32-C3 chip clocked at 160 MHz, 4 MB of Flash memory and 400 KB of PSRAM. ESP32-C3 enables wireless communication with...
Index: ADA-21467
Index: ADA-21467
Available
Check quantity
Regular price €14.08 Price €14.08

Metro Mini 328-5V/16MHz - compatible with Arduino - Adafruit 2590

The Adafruit module is fully compatible with the Arduino Mini. It has 20 digital input/outputs, 6 PWM channels, 6 analog inputs, as well as popular communication interfaces. On...
Index: ADA-04274
Index: ADA-04274
Available
Check quantity
Regular price €17.99 Price €17.99

Trinket M0 Microcontroller - CircuitPython and Arduino IDE - Adafruit 3500

Module with  Atmel ATSAMD21 microcontroller  equipped with 256 kb of Flash memory, 5 digital pins, analog inputs and 2 PWM channels. On board is a microUSB connector, through...
Index: ADA-10873
Index: ADA-10873
Available
Check quantity
Regular price €12.56 Price €12.56

Feather nRF52840 Express Bluefruit LE - Arduino compatible - Adafruit 4062

Feather nRF52840 Express with Bluetooth wireless communication - Bluefruit LE. This is a board manufactured by Adafruit, based on the nRF52840 chip. It is equipped with ARM...
Index: ADA-21017
Index: ADA-21017
Available
Check quantity
Regular price €36.87 Price €36.87

Feather ESP32-S3 WiFi module, GPIO - 4MB Flash 2MB PSRAM - Arduino compatible - Adafruit 5477

Board compatible with Arduino from Adafruit from the Feather series. The module is equipped with the ESP32-S3 chip, has 4 MB of Flash memory and 2 MB of built-in PSRAM ....
Index: ADA-21579
Index: ADA-21579
Available
Check quantity
Regular price €24.96 Price €24.96

Adafruit PyRuler - Electronic Ruler with CircuitPython - Adafruit 4319

The 152 x 25 mm PCB with the standard FR4 thickness is a gold-plated ruler equipped with the most popular component packages that can be found in electronics. In addition...
Index: ADA-21045
Index: ADA-21045
Available
Check quantity
Regular price €17.34 Price €17.34

Trinket - Mini Microcontroller module - 5V - Adafruit 1501

Miniature module with an AVR Attiny85 microcontroller and is equipped with 8 KB of Flash memory, 5 digital pins, analog input and 2 PWM channels. On board is microUSB...
Index: ADA-02626
Index: ADA-02626
Available
Check quantity
Regular price €9.74 Price €9.74

GEMMA - miniature platform with a microcontroller Attiny85 3,3 V - Adafruit 1222

Miniature, round module with AVR Attiny85 microcontroller has an 8 KB Flash memory, 3 digital pins, analog input and 2 channels of PWM. On board is miniUSB connector, through...
Index: ADA-03017
Index: ADA-03017
Available
Check quantity
Regular price €14.08 Price €14.08

Feather 32u4 Basic Proto - compatible with Arduino - Adafruit 2771

A small module with a microcontroller AVR Atmega 32u4 known from the Arduino Leonardo. Feather is designed for portable projects. On board is also a microUSB connector, through...
Index: ADA-05059
Index: ADA-05059
Available
Check quantity
Regular price €24.96 Price €17.47
  • On sale!
  • Promotion

Pro Trinket - ATmega328 module - 5V 16MHz - Adafruit 2000

Module with AVR ATmega328 microcontroller is equipped with 28 KB of Flash memory, 18 digital pins, analog inputs and 8 PWM channels. On board is a microUSB connector, thanks to...
Index: ADA-03005
Index: ADA-03005
Available
Check quantity
Regular price €14.08 Price €14.08

FLORA wearables controller - compatible with Arduino - Adafruit 659

Small, round module with microcontroller AVR Atmega 32u4. Flora is designed to handle smart clothes, on the board is miniUSB connector, thanks to which the system can be...
Index: ADA-03162
Index: ADA-03162
Available
Check quantity
Regular price €19.51 Price €19.51