Electromagnet holding 6V 3W 0,48A 15kgf

Index: DNG-17571 EAN: 5904422327927

Holding electromagnet powered by 6 V , with a maximum load capacity of 15 kg at a standard gravitational acceleration of 9.8 m/s 2 . Current consumption is approx. 0.48 A, nominal power is 3 W. The magnet has a mounting hole with an M4 thread (the set also includes an appropriate screw). The product has dimensions: 30 x 25 mm. The cables that come out are approximately 30 cm long.

Electromagnet holding 6V 3W 0,48A 15kgf
€8.50
€6.91 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: OEM

Product Description: Holding electromagnet 6V 3W 0.48A 15 kgf

Holding electromagnet powered by 6 V , with a maximum load capacity of 15 kg at a standard gravitational acceleration of 9.8 m/s 2 . Current consumption is approx. 0.48 A, nominal power is 3 W. The magnet has a mounting hole with an M4 thread (the set also includes an appropriate screw). The product has dimensions: 30 x 25 mm. The cables that come out are approximately 30 cm long. When using a magnet as an actuator controlled by Arduino , do not connect it directly to the microcontroller pins. Due to the high power consumed by the magnet, an additional relay , opto-isolator or transistor amplifier should be used in the system.

Holding electromagnet 6V 3W 15kgf

Holding electromagnet 6V 3W 15 kgf.

Electromagnet holding the load

Electromagnet holding a load .

6V Holding Electromagnet Specification

  • Supply voltage: 6V
  • Power: 3W
  • Current consumption: approx. 0.48 A
  • Load capacity: 15 kgf (holds a mass of 15 kg for a gravitational acceleration of 9.8 m/s 2 )
  • Cables with stripped insulation at the ends, approx. 30 cm long
  • Mounting hole with M4 thread (screw included)
  • Dimensions: 30 x 25 mm
  • Weight: 98 g

Attention !

The manufacturer recommends maintaining good heat dissipation from the housing, because as the coil temperature increases, the holding force decreases.

Package width 7 cm
Package height 10 cm
Package depth 3 cm
Package weight 0.104 kg

Be the first to ask a question about this product!

Product reviews

Electromagnet holding 6V 3W 0,48A 15kgf

5/5

Average grade

2

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Piotr G. 28.06.2021 Confirmed purchase Translated review
as per specification. Very good. I recommend
Piotr G. 22.04.2021 Confirmed purchase Translated review
Very good electromagnets. I recommend

Customers who bought this product also bought:

Products from the same category: