- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
Multimeter can measure voltage DC and AC up to 500 V, the consumption current up to 10 A, resistance up to 2 megohms. The instrument has measuring functions, backlit display, the measurement of the leds, exceeding of the range, and also recording functions.
The meter is powered by a popularCR2032 battery:LITHIUM 3.0 V-230mAh, which are included in the package. The battery discharge is displayed on the digital indicator. Everything is enclosed in a protected, original box.
Features
- KAT. II 500V / CAT. III 300V
- automatic polarity indication
- automatic reset
- measuring voltage: 500 V AC and 500 V DC. CURRENT (max.)
- measure current: DC 10 A (max.)
- measuring resistance: 2 mω
- SET OF TEST LEADS WITH PVC - CAT. III 600 V - 10 A - 18 AWG - LENGTH 70 cm
- pollution degree II
- Important safety information
Set includes:
- Multimeter Velleman DVM 835.
- Test leads.
- Batteries 2 x AAA
- English and Polish manual. Polish
- Warranty: 24 months.
Technical specification
Option | Range |
---|---|
DC voltage | 200 mV / 2 V / 20 V / 200 V / 500 V |
AC voltage | 200 V / 500 V |
DC | 2000 µa / 20 mA / 200 mA / 10 A |
AC | not |
Resistance | 200 Ohm / 2 kOhm / 20 kOhm / 200 kΩ/ 2000 ohms |
Battery tester | yes |
Continuity measurement | yes, if the resistance is below50 Ohm built-in buzzer beeps |
Diode Tester |
yes |
Warning sound | yes |
Exceeding of the range | yes |
Battery indicator | yes |
Display | LCD (47 x 15 mm) not more than 1999 characters |
The maximum display value | 3 ½ |
Mode selector | manual |
Transistor tester | yes |
Memorization of data | yes |
Backlight | yes |
automatic shut-off | no |
Dimensions | 74 x 30 x 125 mm |
Weight ( with battery) | 100 g |
Power supply | battery 1 x CR2032 |
Fuse |
|
Terms of use |
temperature: 0 °C to 40 °C humidity: < 80% RH |
Storage conditions |
temperature:-20°C to 60°C humidity:< 90% RH |
Probe | CAT II 1000 V / CAT III 600 V, 10 A, L = 75 cm |