Product description: Fluid for ultrasonic cleaners Tersonik PCB - 1000 ml
TermoPasty liquid for ultrasonic cleaners is a transparent liquid with a pH of 11 . It is not recommended to dilute the preparation before direct use. The product is completely safe to use, is water-based and does not contain substances harmful to health. Ensures effective removal of fluxes, solder pastes and SMT adhesives . Ultrasonic cleaning fluid guarantees complete removal of all unwanted residues from PCB boards after the soldering process.
Fluid for ultrasonic cleaners Termosonik PCB - 1000 ml.
It is not recommended to dilute the preparation before direct use.How to use
- Pour the liquid directly into the tank of the ultrasonic cleaner
- Run the ultrasonic cleaning process for at least 10 minutes
- Remove the item from the washer
- Rinse the item thoroughly under running water
- Continue rinsing under demineralized or deionized water to remove any residues
- Allow the tile to dry. It can be dried naturally at room temperature or using a stream of hot air
- Make sure the hob is completely dry before using it again
Technical Specifications
- Physical state: liquid
- Color: transparent
- Density at 20°C: 0.99 g/cm3
- Viscosity at 20°C: 15 cP
- pH: 11
- Solubility in water: complete
- Capacity: 1 l
Useful links |
