Filter by
Price
0 24
more (-5) ok clear
Categories
more (-3) ok clear
Filter

Promotion products

Recomendations

List of products by brand TermoPasty

Reagents and finished chemical products belong to the basic equipment of every prototyping lab, electronics service and even the home workshop. As in every field of technology, quality plays a key role in this segment as well. If you are looking for chemicals for electronics, which you can trust - you have come to the right place. We would like to invite you to get acquainted with the products of a Polish company AG TermoPasty, which - as if in spite of its name - already offers a much wider assortment than just high-quality thermal conductive pastes. However, as it was with them that the brand started its popularity on the market, it is worth presenting the offer of products from this group first.

Products: 99
Loading...

Graphite varnish for repairing PCB paths

The product is designed to repair graphite-coated boards. It is also used to repair broken tracks, and to complete the loss of graphite layer in printed circuits. Set includes...
5.0 (2)
Index: CHE-01816
Index: CHE-01816
Shipping in 24 hours
Available
Regular price €3.00 Price €3.00

Silicone oil 100ml

Silicone based oil reaching the most inaccessible places. Forms a non-hardening insulating film. It has high insulating properties, prevents electrical discharges and protects...
4.8 (5)
Index: CHE-01815
Index: CHE-01815
Shipping in 24 hours
Available
Regular price €3.90 Price €3.90

Electroconductive Rubber 50x50x0,5mm

Rubber conducting electric current, is used, for example, to repair the keyboards, calculators, control boards.
5.0 (3)
Index: TRP-12053
Index: TRP-12053
Shipping in 24 hours
Available
Regular price €1.90 Price €1.90

Technical Petroleum Jelly (Vaseline) - 65ml

Preparation designed to protect the electrical contacts and lubrication of bearings. Capacity: 65 ml .
Index: CHE-06339
Index: CHE-06339
Shipping in 24 hours
Available
Regular price €2.50 Price €2.50

Flux Varnish LT-4 spray 100ml

A preparation which protects printed circuit boards against corrosion and oxidation. Facilitates soldering and prevents cold soldering. Capacity of the package is 100 ml.
Index: CHE-08876
Index: CHE-08876
Shipping in 24 hours
Available
Regular price €4.90 Price €4.90

Ceramic grease - spray 100ml

The product is designed for use on mechanically and thermally loaded elements. Prevents metal seizure and corrosion . Does not contain metal or silicone compounds. Resistant...
Index: CHE-06343
Index: CHE-06343
Shipping in 24 hours
Available
Regular price €3.50 Price €3.50

Machines olive oil - 65ml

Preparation designed to lubricate lightly loaded industrial machine parts. Capacity: 65 ml .
5.0 (3)
Index: CHE-06340
Index: CHE-06340
Shipping in 24 hours
Available
Regular price €1.90 Price €1.90

Vaseline oil 100ml

An agent used to lubricate machine parts and precision mechanisms (e.g. gears). It reduces friction. Effectively eliminates squeaking and gnashing and facilitates slipping.
5.0 (3)
Index: CHE-00975
Index: CHE-00975
Shipping in 24 hours
Available
Regular price €1.90 Price €1.90

Machine towot - oiler 65ml

The product is designed to lubricate bearings, joints, guides, etc. It works in temperatures from -24 °C to 135 °C at high loads. Protects against corrosion. Resistant to cold...
4.0 (1)
Index: CHE-05712
Index: CHE-05712
Shipping in 24 hours
Available
Regular price €2.50 Price €2.50

Kontakt U - spray 300ml

The product is designed to clean and degrease electrical components and contacts. It removes dirt, grease, old greases, oils, silicones and sulphides. It protects against...
4.8 (4)
Index: CHE-06342
Index: CHE-06342
Shipping in 24 hours
Available
Regular price €3.90 Price €3.90

Kontakt PR - spray 300ml

A preparation designed to regenerate potentiometers. It removes all the impurities generated during the operation of the equipment. Capacity: 300 ml.
5.0 (12)
Index: CHE-06334
Index: CHE-06334
Shipping in 24 hours
Available
Regular price €3.90 Price €3.90

Graphite grease - oiler 65ml

Grease with graphite for increased load resistance. Contains special additives for effective corrosion protection. Resistant to water. Package capacity is 65 ml.
Index: CHE-05713
Index: CHE-05713
Shipping in 24 hours
Available
Regular price €2.50 Price €2.50

Gas connections tightness tester - 400ml spray

Odourless water-based agent to detect any gas or air leakage, even at low pressure. Package capacity is 400 ml.
4.5 (2)
Index: CHE-05708
Index: CHE-05708
Shipping in 24 hours
Available
Regular price €6.50 Price €6.50

Kontakt IPA plus - isopropyl alcohol - with a sprayer - 250ml

High purity isopropyl alcohol "IPA" designed to remove oils and greases , and to care for and clean all kinds of readers. The product evaporates quickly and completely...
5.0 (16)
Index: TRP-17584
Index: TRP-17584
Shipping in 24 hours
Available
Regular price €2.90 Price €2.90

Set of microfibre cloths 30 x 30cm - various colors - 5pcs.

Set of high quality microfibre cloths. They have dimensions of 30 x 30 cm. 5 pieces in different colours: grey , red, yellow, blue and green. The cloths are delicate and...
5.0 (2)
Index: TRP-14663
Index: TRP-14663
Shipping in 24 hours
Available
Regular price €4.90 Price €4.90

PCB lacquer PVB 16 - spray 400ml

Fast drying PVB coating with insulating properties. Protects against stray currents or short circuits. Packaging capacity is 400 ml.
5.0 (11)
Index: CHE-05709
Index: CHE-05709
Shipping in 24 hours
Available
Regular price €8.50 Price €8.50

Electroconductive Rubber 50x150x0,5 mm

Rubber conducting electric current, is used, for example, to repair the keyboards, calculators, control boards.
5.0 (4)
Index: TRP-12052
Index: TRP-12052
Shipping in 24 hours
Available
Regular price €3.90 Price €3.90

Graphite grease - spray 100ml

Preparation intended to lubricate metals. Graphite additive increases resistance to loads. It also provides corrosion protection. It is resistant to water. Capacity: 100 ml .
4.7 (2)
Index: CHE-06344
Index: CHE-06344
Shipping in 24 hours
Available
Regular price €2.50 Price €2.50

Kontakt S - spray 300ml

The product is designed to clean contacts of oxides and sulfides. It protects against corrosion and ensures free flow of current. It is used in places where clean contacts are...
5.0 (11)
Index: CHE-06341
Index: CHE-06341
Shipping in 24 hours
Available
Regular price €4.50 Price €4.50

Varnish for printed boards PVB 16 - spray 100ml

Fast drying PVB coating with insulating properties. Protects against stray currents or short circuits. Package capacity is 100 ml.
5.0 (4)
Index: CHE-08877
Index: CHE-08877
Shipping in 24 hours
Available
Regular price €4.50 Price €4.50

Kontakt IPA - isopropyl alcohol - Spray 300ml

A preparation designed to remove impurities from optical elements. Contains isopropyl alcohol. It evaporates quickly and leaves no traces. Capacity: 300 ml.
5.0 (9)
Index: CHE-04067
Index: CHE-04067
Shipping in 24 hours
Available
Regular price €4.00 Price €4.00

Universal Developer for Photolakers and Positive Laminates - 22g

A product to develop photo-varnishes and positive plates. Provides good quality and sharpness of contours. It does not contain NaOH, which increases work safety.
Index: CHE-05697
Index: CHE-05697
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

Thermo-conductive tape AG Thermopad 30x30x3mm - 1.5W/mK

The tape improves the heat flow between the electronic components. Used in places where it is not possible to use thermally conductive paste. The tape is double-sided adhesive....
5.0 (1)
Index: CHE-06060
Index: CHE-06060
Shipping in 24 hours
Available
Regular price €1.90 Price €1.90

CO sensors tester - spray 400ml

The preparation is designed for testing the carbon monoxide and smoke detectors. It enables the testing of the correctness of operation of the CO detector. Capacity: 400 ml.
4.9 (9)
Index: CHE-08275
Index: CHE-08275
Shipping in 24 hours
Available
Regular price €6.90 Price €6.90

Thermal conductive pastes and components

Currently AG TermoPasty offers several groups of thermally conductive products in the form of pastes, adhesives or pads. The classic application of pastes of this kind is facilitating the removal of heat from computer processors to heat sinks. In such applications metal based pastes turn out to be particularly useful - copper, silver or even gold particles significantly improve thermal parameters of pastes and allow to achieve high value of heat transfer coefficient even exceeding 2.8W/mK (AG Gold version). A special type of thermal conductive paste is a product based on diamond dust (AG Diamond Brush), for which the aforementioned coefficient reaches values above 4 W/mK, and the operating temperature range reaches from -40oCto 300oC. Cheaper, popular silicone pastes are suitable for typical applications in consumer electronics or low- and medium-power power supplies, as well as LED lighting or air conditioners (they offer heat transfer coefficient of 0.88 - 1.5 W/mK, although AG TermoPasty HPX thermal conductive paste reaches high conductivity values of 2.8 W/mK, i.e. reaches the efficiency of gold-based paste. An interesting representative of thermally conductive products of the Polish manufacturer is AG TermoGlue. It is perfect for fixing heat sinks on integrated circuits, transistors or rectifier bridges that cannot be screwed down or fixed with a clip. The adhesive is also perfect for fixing thermals and temperature sensors. Its high elasticity and adhesion make that the product holds well even on uneven surfaces.

Chemistry for the production and assembly of printed circuit boards

AG TermoPasty also offers a range of products covering virtually all stages of PCB prototype production. Starting with "immortal" sodium persulfate B327, which is the most popular copper etching agent, through universal developer for photochemical production of PCBs, preparations for currentless tinning of tracks and fluxes in liquid, spray, pen and gel, to varnishes for PCB protection - the offer of AG TermoPasty covers all the issues connected with the assembly of PCBs. The company neither escapes tradition (offering the most classic flux - colophony in a convenient metal can) nor shies away from innovation, constantly expanding its assortment of high-class chemicals for electronics engineers.

AG TermoPasta products in Botland offer

In our offer you will find a number of well-known and popular fluxes from Polish manufacturer. For basic applications, in particular servicing and soldering of soldered parts, we recommend colophony in 20g, 40g and 100g cans. For manual precision soldering of SMD components of any gauge, we recommend fluxes in liquid (the well-known and popular "no clean" flux RF800), gel (very convenient to use, proven especially for lead-free soldering) and in the form of ergonomic pen(AG TermoPasty Flux Pen TK83). If, on the other hand, you are looking for a comfortable to use soldering paste, choose one of the products from EasyPrint series in leaded version (Sn62 Pb36) or unleaded, compliant with the latest RoHS directive (Sn96.5 Ag3 Cu0.5). We also recommend a preparation for the chemical, currentless tin pl ating of copper, sold as a powder in 90-gram packages.