- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D Printer - Anycubic Photon Mono 4K - resin + UV
Anycubic3D printer with a working area of 132 x 80 x 165 mm. It uses LCD-based SLA Printing technology to form prints from photosensitive resin. In the device, a matrix of 15 diodes is responsible for the emission of UV light with a wavelength of 405 nm, which cures the printing material. The printing resolution of Photon Mono 4K is 3840 x 2400 pixels (4K). The design dimensions of the presented 3D printer are 383 x 227 x 222 mm.
3D printer - Anycubic Photon Mono 4K - resin + UV.
Large workspace.
Freedom of creation.
Anycubic Photon Mono 4K allows you to form models with maximum dimensions of 132 x 80 x 165 mm. The 1.7 l total working volume leaves enough space and freedom to create any cubic shape.
Vivid details thanks to 4K
With a resolution of 3840 x 2400 px, the Photon Mono 4K display has a total of over 9.2 million pixels. This is 122% higher than the LCD screens on Photon, Photon Mono, and models from other manufacturers using 2K displays in 3D printers. The high resolution makes 3D models take on vivid detail.
4K resolution of 3840 x 2400 px.
Clear edges and corners in 3D printed models.
High level of edge and corner accuracy
The Photon Mono 4K uses a 400:1 contrast ratio screen, which is 100% higher than Anycubic's Photon, Photon Mono and competing 200:1 contrast ratio 3D printers, so finished 3D prints have crisp, clear edges and corners.
Additional protective film
To better protect the high-end screen, the Anycubic Photon Mono 4K has a dedicated and replaceable anti-scratch film over the screen itself. This makes the display much more durable and resistant to mechanical damage.
The high-end screen is protected by the film.
Comparison of working speed of different 3D printers.
High speed of work
With an impressive print speed of ≤ 5 cm / hour, the Photon Mono 4K can print a typical 12 cm high 3D model in 2.5 hours. This is 3.5 hours shorter than a similar attempt with the Anycubic Photon 3D printer. Fast printing does not degrade the quality of the final 3D prints.
Efficient light matrix
The matrix contains 15 bright LEDs. They provide an efficient light source that allows the Anycubic Photon Mono 4 to provide ≥ 90% light uniformity and an intensity of ≤ 27,320 lux on each layer. This enables faster printing.
15 UV LEDs are placed in the array.
Comparison of the degree of light transmission.
High light transmission
The Anycubic Photon Mono 4K is equipped with a screen with 7% light transmittance, which is 2.5 times higher than the Anycubic Photon. The high light transmittance enables rapid molding of 3D resin models.
6.2'' screen
Anycubic Photon Mono 4K is equipped with a 6.23'' screen. It is 29% larger than the screen used in the Anycubic Photon (5.5'') and 8% larger than the display in the Photon Mono 3D printer.
The screen in the Anycubic Photon Mono 4K has a diagonal of 6.23''.
Anycubic Photon Mono 4K specifications
| Technical Specification | |
|---|---|
| Printing method: | LCD-based SLA |
| Power: | 45 W |
| LCD display (part of the resin curing system) | 6.23'' monochrome |
| Light Transmission: | 7% |
| Contrast ratio: | 400:1 |
| Light source: | parallel matrix (15 x LED) |
| Illumination intensity: | 23905 to 27320 lux / 3500 to 4000 μw/cm² |
| Print resolution: | 3840 x 2400 px (4K) |
| Horizontal resolution: | 35 μm |
| Print speed: | ≤ 5 cm / hour |
| Controls: | 2.8'' TFT display |
| Communication: | USB type A 2.0 socket |
| Software: | Photon Workshop'' |
| Working area: | 132 x 80 x 165 mm |
| Printer dimensions: | 383 x 227 x 222 mm |
| Weight: | 4.3 kg |
Useful links |
