- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Charger/rozładowywarka with built-in balancerem links REDOX BETA, this is a great offer especially for beginners and medium to advanced modelers who are looking for a simple and economical charger for everyday use, in version, powered by a 12V current. In addition, included is a power adapter, thanks to which you can replenish ładowakę not only from the source 12, but also a 230V socket. Packed in an attractive box with a description in Russian, charger, supports managers and service packs LiPo, LiIon and LiFe (with the possibility of balancing links), as well as links and packages, NiCd, NiMH and Pb, charging current up to 5A.
Feature:
Dimensions: 113 x 65 x 23 mm
Working voltage: DC 11.0~18.0 V or AC/DC 230 V 5A
Output power: max. charge power 50W max. discharge power 5W
Charge current: 0.1-5.0 A
Discharge current: 0.1-1.0 A
Current balanced: 300 mAh/link
The number of elements of NiCD/NiMH batteries: 1-15 elements
The number of supported target Li-Po/Fe/Ion: 1-6 goal
Supported batteries Pb: 2-20V
Weight (without cable): 195 g
Built-in memory battery charger: max. 5 packages
Function cyklowania packages
4 button programming
Built-in connectors:
socket adapter balancer + adaptor 2-6S
socket-DIN plug for charging (corresponding vias are included)
connector (DC 12V)
connector for optional temperature sensor
USB connector
The contents of the set:
Charger Redox Beta
Power cable 12V DC (Jack - Crocodile)
network adapter AC/DC 230 V 5A
1 x Gold 4 mm Adapter - DEAN Connector
Additional adapters extender adapter Gold 4 mm - DIN Plug:
1 x DEAN Adapter Plug - Crocodile
1 x DEAN Adapter Plug - Plug servo (futaba type)
1 x DEAN Adapter Plug - Lattice candle (charging clips 1.5 V)
1 x DEAN Adapter Plug - Connector BEC
Instruction manual in Russian
Description of product: Li-Pol / Li-Ion / Li-Fe / Ni-Cd / Ni-MH Charger with Redox Delta balancer with built-in power supply
Redox Deltais a simple and universal charger working with most of the cells used in robotics and model building. Large, easy to read display with intuitive user interface allow you to select the appropriate parameters and constantly monitor the battery status during charging. The adapter kit provides uninterrupted charging of cellsLiPo,LiIon,LiFe, and packages ofNiCdandNiMH. Built-in balancer ensures the correct and balanced charging of all cells in the packages. The device has a built-in power supply for direct attachment to the socket.
The charger has a built-in power supply working through network cable of clover type (included).
Specification
- Supply voltage: AC 230 V (AC)
- Working voltage of the charger: DC 11 V to 15 V
- Output power:
- max. charging power 50 W
- max. discharge power 5W
- Charging current: from 0.1 A to 5.0 A
- Discharge current: 0.1 A to 1.0 A
- The number of used cells NiCD/NiMH: 1 to 15 cells
- The number of supported cells Li-Po/Fe/Ion: 1 to 6 cells
- Built-in memory of battery charger: max. 5 packages
- Function of cycling the packages
- 4 programming buttons
- Weight (without wires): 277 g
- Dimensions: 133 x 87 x 33 mm
- Built-in socket:
- sockets to adapter of balancer + adaptor 2-6S
- sockets to DIN plug for charging (corresponding glands are included)
- socket of Jack type (DC 12V)
- socket for an additionaltemperature sensor
- socket of built-in power supply
The contents of the set
- Charger Redox Delta
- Cable for charger with plug for 230V
- The power cable 12 V DC (Jack - Crocodile)
- Adapter Banana (2x plug) 4 mm -> DEANS
- Adapter DEANS -> crocodile
- Adapter DEANS -> servo socket
- Adapter DEANS -> candle dummy
- Adapter DEANS -> TAMIYA
- Adapter crocodile -> Jack (for powering the charger from battery 12V)
- Instruction manual in Polish
