Product description: 3D printer - Creality Ender-3 V2
Creality Ender-3 v2 is a new, improved version, combining the advantages of previous models with a lot of new solutions. The printer allows you to print elements with dimensions of 220 x 220 x 250 mm, and the dimensions of the entire construction are 475 x 470 x 620 mm. Ender-3 v2 has a completely refreshed interface, a new version of the motherboard equipped with silent controllers and a glass table, thanks to which the problems with printing are eliminated. The 3D printer ispartially complex, so its installation is easy and fast.
Silent drivers allow you to mute the Creality Ender-3 v2 printer.
New, improved motherboard
Compared to the previous version, the Creality Ender-3 v2 printer has been equipped with a new, improved version of the motherboard, which uses silent engine drivers from the popular TMC series. This allows you to completely eliminate the sounds accompanying the operation of stepper motors and reduce the noise generated to below 50 dB.
New design of Ender-3 v2 printer
New user interface and refreshed design
Creality Ender-3 v2 has a completely refreshed user interface. The 4.3'' graphic colour display allows you to display an intuitive menu in an eye-pleasing form in HD resolution. It is worth noting that the display has lived up to the original casing, which eliminates the possibility of accidental damage to the electronics. There were also changes in the hot-edge, which received a new, redesigned casing.
A knob for manual filament feeding or removal.
No more uneven table
The Creality Ender-3 v2 3D printer is equipped with a glass table with an overlay to increase the adhesion of the printed models, so there will be no need to use chemicals or paint tapes to increase adhesion. The glass table eliminates the biggest problem - uneven table surface. Now, after proper leveling, we can enjoy a great first layer, and thus a high quality print. The glass is assembled with special clamps, thanks to which it holds the table securely.
Convenient tensioning of the X and Y axis belts thanks to the built-in tensioner.
Solutions to make your work with the printer easier
Creality's printers are known for their excellent support from the manufacturer and an incredible community of developers who create accessories to make your work with the printer easier. The Ender-3 v2 has been equipped with a number of improvements over the previous versions, which will positively translate into calibration and operation. Ender-3 v2 has original knobs that allow you to tension the X and Y axis strips in a comfortable way. Manual filament feeding or removal is facilitated by the built-in knob in the extruder. It also makes it easier to see if the extruder is not working properly - jumping over the knob. A tool drawer located next to the display will help to keep your work station tidy. The resume function will save you time and allow you to continue printing in case of a temporary power outage.
A film presenting the installation of Creality Ender-3 v2 printer.
Capabilities of the Creality Ender-3 v2 printer
The Ender-3 v2 supports all the most common types of filamentssuch as PLA, PETG or ABS - thanks to a table that heats up to 100°C. The layer thickness can vary from 0.1 mm to 0.4 mm and the print precision is 0.1 mm. The printer supports 1.75 mm diameter filaments. A 24-volt power supply, which is rare in this price range, is responsible for stable operation of the device.
Readmore about 3D printing on our blog!
Specification of Creality Ender-3 v2 printer
| Technical Specification | |
|---|---|
| Printing method: |
FDM |
| Power supply voltage: |
100 V to 240 V (AC - mains) |
| The tension of work: |
24 V (built-in power supply) |
| Total power: | 350 W |
| Display: | LCD |
| Print speed: | up to 100 mm/s |
| Print accuracy: | ± 0.1 mm |
| Print thickness: | from 0.1 mm to 0.4 mm |
| Nozzle diameter: |
0.4 mm |
| The filament served: |
PLA, ABS, TPU, gradient, carbon fibre filament, etc. |
| Diameter of the filament: | 1.75 mm |
| Mode of operation: | Online or from an SD card |
| File format: | .stl, .obj, .amph |
| Software: | Cura, Repetier-Host, Simplify3D |
| Print size: |
220 x 220 x 250 mm |
| Nozzle temperature: | max. 250 °C |
| Working table temperature: | 110 °C |
| Dimensions of the printer: | 475 x 470 x 620 mm |
| The weight: |
7.8 kg |
A 4 cm high figure made on the previous model of 3D printer - Creality Ender-3.
Useful links |
