Product Description: 0.3mm / 240 degree C Nozzle for Flashforge Adventurer 4 3D Printer
Modular nozzle dedicated to Flashforge Adventurer 4 3D printer. It ensures full compatibility with the indicated device model. The product has a hole with a diameter of 0.3 mm and is designed to operate with a maximum operating temperature of 240 ° C. Replacing the element is very simple, it does not require disassembling the print head.
Our store also offers the Flashforge Adventurer 4 3D printer.
0.3mm / 240 ° C nozzle for Flashforge Adventurer 3D printer 4 .
How to replace the nozzle on Flashforge Adventurer 4 ?
Replacing the nozzle on the Adventurer 4
Replacing the original modular nozzles used in the Flashforge Adventurer 4 is very simple. To do this, unload the filament and turn off the printer. Then press the two lock buttons at the front of the head at the same time, then gently pull the nozzle out and put the new one in the same place, making sure that it is properly seated.
The manufacturer recommends calibrating the newly installed components each time after replacing both the nozzle and the entire head. To do this, go to the "Maintain" section in the printer menu, then "Change Extruder" and enter the temperature value written on the sticker attached to the product. In the next step, select the nozzle type with the appropriate diameter and working temperature in the picture menu.
Specification of 0.3mm nozzle for Flashforge Adventurer 4 3D printer
- Developer: Flashforge
- Spare part type: printing nozzle module
- Dedicated 3D printer model: Flashforge Adventurer 4
- Nozzle opening diameter: 0.3 mm
- Maximum working temperature: 240 ° C
Nozzle module for Flashforge Adventurer 4 3D printer .
