• EOL

MW-R4G wall RFID reader - 13,56MHz - gray

Index: NEX-19468 EAN: 5904422365462
MW-R4G wall RFID reader - 13,56MHz - gray
€37.50
€30.49 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Netronix

Attention!

The product has been discontinued. Check other products in category.

Product description: RFID Wall Mounted Reader MW-R4G - 13.56 MHz - gray

Wall mountableRFIDcard and transponder reader. It supports MIFARE Classic, Plus, Ultralight C, DESFire, ICODE SLI, iCLASS (CSN only) standards. MW-R4G operates in13.56 MHzband. It has a built-in buzzer, touch button, antenna and programmable RGB LED indicator. Reader inRS485 interfacemode can operate with Netronix and MODBUS-RTU transmission protocol.

In our offer there are also available otherNetronixproducts.

Czytnik naścienny RFID MW-R4G - 13,56MHz - szary

Wall mounted RFID reader MW-R4G - 13,56MHz - gray.

Pinout description

Reader haseight leadsin form of different colored wires with stripped insulation, placed on back side of the casing. Below there is description of each pin. Detailed description of device functions can be found inuser manualprepared by the manufacturer.

Leads description of MW-R4G reader
Cable color Name Function
Red VCC Power supply
Blue GND GND
White Anti-collision Lead for connecting readers working close to each other
Brown PinOUT Any purpose output
Green PinINTERFACE1 RS485_B serial interface line
Yellow PinINTERFACE2 RS485_A serial interface line
Gray PinIN0 Any purpose input
Pink PinIN1 Any purpose input

Zdjęcie poglądowe montażu czytnika naściennego RFID MW-R4

The wall-mountedRFID reader MW-R4 is shown in the picture.

Specification of the Netronix MW-R4G RFID wall-mounted reader

  • Device type: wall-mounted RFID reader
  • Supply voltage: 8 V to 15 V
  • Maximum current consumption 120 mA
  • Average current consumption: 25 mA
  • Rated RF operating frequency of the module: 13.56 MHz
  • Reading distance: up to 80 mm
  • Supported interfaces: RS485 (Netronix and MODBUS-RTU transmission protocol)
  • GPIO: 3
  • Supported transponders:
    • MIFARE Classic, Ultralight
    • MIFARE Plus, Ultralight C, DESFire
    • ICODE SLI
    • iCLASS (CSN only)
  • Built-in functionalities: antenna, buzzer, RGB LED
  • Front button type: capacitive
  • Degree of protection IP: IP45
  • Dimensions: 83 x 44 x 14 mm
Frequency from 13.56 MHz
Frequency to 13.56 MHz

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: