Description: Devil Design Silk 1,75 mm 1 kg - Blue
Filament Silkfrom Devil Designis a thermoplastic material in a form of filament. It is used for3D printingwith FFF method. Filament inbluecolor is pre-wound on a spool and vacuum packed with moisture absorber. Spool contains 1 kg of product. It can be used in all FFF printers, which are not protected against the use of felt from external suppliers. Silk is a mixture of PLA and PETG materials, which is characterized by a very high gloss.
![Filaments](https://cdn3.botland.store/img/art/inne/filamenty3.jpg)
In our offer of filaments you will also find other materials and colors.
Suggested parameters of printing with the felt
Printing temperature | From 225 ° C to 245 ° C |
Table temperature | From 50°C to 60°C |
Print cooling | Optional |
There may be a noticeable swelling of the material coming out of the nozzle when loading the filament or during printing with it. However, this is a completely natural effect, which results from the surface tension of polymers included in the filament material. For better results, the manufacturer recommends setting a high fan power during printing and lowering the printing speed.
Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the felt
Parameter | Range |
---|---|
Filament diameter | 1,75 mm |
Dimensional tolerance of the filament | +/- 0.05 mm |
Colour | Blue |
Material surface | High gloss |
Material shrinkage | Very low |
Printing temperature | From 225°C to 245°C |
Table temperature | From 50°C to 60°C |
Spool material | Silk |
Spool diameter | 200 mm |
Spool width | 70 mm |
Mounting hole diameter | 52 mm |
Moisture absorber | Yes |
Vacuum packaging | Yes |
Roundness | +/- 0,02 mm |
Packaging dimensions | 205 x 205 x 80 mm |
Net weight | 1 kg |
Useful links |