Product description: 5W laser head module for Creality printers
Turn your 3D printer into a laser plotter in seconds! The easy-to-install 5-watt laser head does not require any software changes, you can enjoy precise cutting and engraving immediately after its installation . The laser operation is controlled using the control panel included in the set. The module is compatible with many models of Creality printers.
5W laser head module and control panel.
Powerful 5 watt laser.
5 watt laser
The works coming out from under the Creality laser will be refined to the smallest detail. The thickness of the laser spot is only 0.1 mm , thanks to which the edges are precisely burned and sharply finished, and the project looks very professional. A 5 W laser is able to cut a wooden board with a maximum thickness of 5 mm.
Wide compatibility with printers
The head is compatible with: Ender-2 Pro , Ender-3 , Ender-3 Pro, Ender-3 Neo, Ender-3 Max Neo, Ender-3 S1 Max, Ender-3 V2 , Ender-3 V2 Neo , CR-10 , CR-10 mini, CR-10S, CR-20, CR-20 Pro, Ender-3 S1 , Ender-2 and also DISWAY-01.
Easy-to-use
The set includes a control panel. There is only one button on it, which is used to control the cutting or engraving process. With it, you can start, pause and end your work, and turn on the preview. The button has a backlight that informs about the status of the device.
Quick calibration
A lever located on the side of the head housing helps to focus the laser spot. Move the lever down before starting the focusing process. After it is finished, raise it again. The focusing process will not be difficult even for beginners and will guarantee the highest precision of the laser.
The focusing process is facilitated by a lever placed on the head.
Vapor exhaust system.
Safe for the user
The head is enclosed, thanks to which the laser will not pose a threat to the eyes. The visor can filter 90% of UV light, allowing the user to work without specialized safety glasses. In addition, the head has a fan with a washable cotton filter, effectively absorbing smoke and dust generated during engraving.
Working offline
The control panel has a slot for TF memory cards, just import the file to the device and you will be able to cut and engrave anywhere you want, without the need to connect to a computer .
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Laser Power: | 5W |
| Source of light: | semiconductor laser |
| Laser spot size: | 0.1x0.1mm |
| Laser wavelength: | 455nm (+/- 5nm) |
| Engraving Resolution: | 254 dpi |
| Cutting Thickness: | from 0 mm to 5 mm (depending on the material) |
| Software: | LaserGRBL, LightBurn |
| Supported Files: | .svg, .png, .jpg, .jpeg, .bmp, .dfx |
| Working voltage: | 24V/3A |
| Working temperature: | from 0°C to 35°C |
| Product Weight: | 1.1 kg |
| Compatible materials: |
|
