- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: RFID Wall Mounted Reader MW-R4G - 13.56 MHz - gray
Wall mountableRFIDcard and transponder reader. It supports MIFARE Classic, Plus, Ultralight C, DESFire, ICODE SLI, iCLASS (CSN only) standards. MW-R4G operates in13.56 MHzband. It has a built-in buzzer, touch button, antenna and programmable RGB LED indicator. Reader inRS485 interfacemode can operate with Netronix and MODBUS-RTU transmission protocol.
In our offer there are also available otherNetronixproducts.
Pinout description
Reader haseight leadsin form of different colored wires with stripped insulation, placed on back side of the casing. Below there is description of each pin. Detailed description of device functions can be found inuser manualprepared by the manufacturer.
Leads description of MW-R4G reader | |||
---|---|---|---|
Cable color | Name | Function | |
Red | VCC | Power supply | |
Blue | GND | GND | |
White | Anti-collision | Lead for connecting readers working close to each other | |
Brown | PinOUT | Any purpose output | |
Green | PinINTERFACE1 | RS485_B serial interface line | |
Yellow | PinINTERFACE2 | RS485_A serial interface line | |
Gray | PinIN0 | Any purpose input | |
Pink | PinIN1 | Any purpose input |
Specification of the Netronix MW-R4G RFID wall-mounted reader
- Device type: wall-mounted RFID reader
- Supply voltage: 8 V to 15 V
- Maximum current consumption 120 mA
- Average current consumption: 25 mA
- Rated RF operating frequency of the module: 13.56 MHz
- Reading distance: up to 80 mm
- Supported interfaces: RS485 (Netronix and MODBUS-RTU transmission protocol)
- GPIO: 3
- Supported transponders:
- MIFARE Classic, Ultralight
- MIFARE Plus, Ultralight C, DESFire
- ICODE SLI
- iCLASS (CSN only)
- Built-in functionalities: antenna, buzzer, RGB LED
- Front button type: capacitive
- Degree of protection IP: IP45
- Dimensions: 83 x 44 x 14 mm
Useful links |