Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W - zdjęcie 1
Cyfrowa stacja 937D - 60W - zdjęcie 2
Cyfrowa stacja 937D - 60W - zdjęcie 3
Cyfrowa stacja 937D - 60W - zdjęcie 4

Soldering station WEP 872D+ 700W hotair with compressor

Index: LUT-03569 EAN: 5907558240849
4.8
(7)
Ask a question

Soldering iron with increased heating power up to 75 W and hot air in one. Full power is 700 W. The device has a smooth regulation of the temperature and two LED displays. The station has a PID temperature controller. The blow is done via the compressor.

Soldering station WEP 872D+ 700W hotair with compressor
€92.50
€75.20 tax excl.
Check quantity
Available
Shipping in 24 hours
Free shipping
30 days to return
PayPal payment
Check quantity
Manufacturer: WEP

Description

Station 872D+ has a PID temperature controller. It shows the temperature of the airflow and of the tip of the soldering iron. Built-in PID controller maintains a high stability of the given temperature and reacts quickly to the change. The device displays the actual temperature in C or F degrees. Blow of hot air and soldering iron, can work independently from each other.

 

 

Station 872D+ features automatic cooling, i.e., after the work, the hot air knob iscooled to a safe temperature, it effectively prolongs the service life of the heating element. The station has a durable metal housing. The blow of air is done through the compressor so we are sure of the long-term, trouble-free operation with the stability of the power of the blow.

 

Check out our offer of additional tips!

Specification

  • Supply voltage: 230 V
  • Power: 700 To
  • Fan type: pump with spiral membrane of the air blow
  • Compressor performance: max 24 l/min
  • Soldering iron power: 72 W - 75 W
  • Range of temperature control:
    • Smooth adjustable temperature of hot air in the range from 100 °C to 480 °C
    • Temperature stability: +/-1°C
    • Smooth adjustment of temperature of the bulb in the range from 100 °C to 480 °C
    • Temperature stability of soldering tip: +/-1°C
  • Adjustment of air blow power
  • LED display of the temperature of hot air
  • LED display of the temperature of the tip
  • Handle length: up to 100 cm
  • The ground resistance of a soldering iron: below 2 Ω
  • The potential of the ground of a soldering iron: below 2 mV

  

Includes:

  • Soldering station WEP 872D+

  • The bracket for the hotair flask
  • Stand for putting the flasks off along with a sponge to clean the soldering tip
  • The grotto flask
  • Hotair nozzle:
    • Nozzle with a diameter of 2.5 mm, model 1124
    • A nozzle with a diameter of 4,4 mm, model 1130
    • Nozzle with a diameter of 8 mm, model 1195
    • Nozzle with a diameter of 9 mm, model 1197
  • Power cable

 

First run

  • After delivery of equipment, it should not be immediately started.
  • Equipment must remain about 12 hours at room temperature before switching on.
  • All applications for damages caused by the premature commissioning of the equipment, will be denied.
  • You must completely remove the screw/screws from the bottom of the station, if the source of air blow is compressor. These screws are marked in red (1 or 3 screws, depending on model).

 

Note

Heating elements (heaters) and the tips are not the subject to warranty, either expressed or implied, and replacing them is chargeable.

 

 

Our range of accessoriesfor soldering:

 

Voltage to 220 V AC
Voltage from 240 V AC
Voltage nominal 230 V AC
Nominal power 700 W
Temperature 100 - 480 °C
Solder - Fan no
Solder - real temperature reading yes
Solder - Hotair yes
Solder - Type A/C digital
Package width 33 cm
Package height 20.5 cm
Package depth 27.1 cm
Package weight 4.2 kg
Send us your question

Be the first to ask a question about this product!

Product reviews

Soldering station WEP 872D+ 700W hotair with compressor

4.8/5

Average grade

7

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Wojciech K. 23.05.2021 Confirmed purchase Translated review
The price is okay, I recommend it for beginners and not only because the equipment is quite good. It is a pity that the soldering tips are not included - only one tip is included in the set. I have no more objections
Wojciech S. 19.04.2021 Confirmed purchase Translated review
I lowered the mark for the lack of instructions in Polish, which in a situation when you need to unscrew the securing screws may be a problem for people who do not speak English, and the cause of damage to the station.
Filip B. 24.03.2021 Confirmed purchase Translated review
A very good station, although my model has a drawback in the form of a slightly bent top sheet of the housing. It is possible that it bent when lifting the handle, but this is only an aesthetic drawback. I recommend
Wiesław P. 22.02.2021 Confirmed purchase Translated review
Meets expectations.
Peter 19.07.2024 Confirmed purchase
Michal 22.07.2023 Confirmed purchase
Łukasz 23.12.2022 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: