Product description: Solenoid valve 12 V - 1/2'' 0,02-0,8 MPa - 11 mm port
The valve allows you to control the flow of liquid using a computer or any microcontroller, including Raspberry Pi or Arduino using an amplifier or relay. The device is powered by 12 V. The diameter of the threaded water inputs is 1/2 ". The spigot is 11 mm. Minimum pressure value is 0.2 bar (20 kPa).
Solenoid valve 12 V - 1/2'' 0,02-0,8 MPa - 11 mm inlet.
Technical specification of the valve
- Supply voltage: 12 V
- Current consumption: approx. 450 mA
- Closed in rest position
- Thread: 1/2 "
- Stub: 11 mm
- Times:
- Opening: < 0,15 s
- closing: < 0,3 s
- Pressure range: 0.02 to 0.8 MPa
- Liquid temperature: from 0 to 100 °C
