- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Filament Fiberlogy PETG 1,75mm 0,85kg - Orange
Fiberlogy's PETG filament in orange. Its diameter is 1.75mm.The product wasvacuumpacked and its net weight is 0.85 kg. The cartridge can be used in all3D printers that do not haveblockages before usingothersuppliers' filaments and those working in FFF/FDM technology. PETG films are distinguished by their strength and chemical resistance.
In our offer of filaments you will also find other materials and colors.
Properties of the PETG pillar
PETG is characterized by high resistance to mechanical damage such as scratches or abrasion and chemical damage caused by acids, salts and alkaline substances. This type of filament will work perfectly well as a material for creating all kinds of handles, housings or even jewelry. Glycol in the composition of the filament, increases resistance to impact and provides less shrinkage.
In this video, we explain the characteristics of the selected filament to facilitate the selection of the type of filament to your expectations.
Suggested printing parameters of the filament
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Fiberlogy pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Orange |
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Spool - material | PETG |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Charts of PETG filament properties.
Useful links |
