• EOL

USB 3.0 extension for cameras - ArduCam B0111

Index: ACM-17657

Overlay for ArduCam cameras enables connecting cameras via USB 3.0 interface. The new version of the overlay offers higher performance and greater possibilities than the USB 2.0 version. The overlay works with both cameras offering high quality image recording with a large number of frames per second and with stereoscopic cameras and modules equipped with IRCUT.

USB 3.0 extension for cameras - ArduCam B0111
€116.90
€95.04 tax excl.
Product was replaced by other
Manufacturer: ArduCam

Attention!

The product has been discontinued. Check other products incategory.

Product description: USB 3.0 overlay for cameras - ArduCam B0111

Overlay forArduCamcameras allowing to connect cameras with USB interface in version 3.0.Newversion ofthe overlay offers higherperformance and morepossibilities thanin case of USB 2 version.0. overlay cooperates with cameras offering high quality video recording with high frame rate as well as with stereoscopic cameras andmodulesequipped with IRCUT.

Przedmiotem sprzedaży jest nakładka USB 3.0, nakładkę dla interfejsu MIPI i moduł kamery należy kupić oddzielnie.

The subject of sale is USB 3.0 overlay,MIPI overlay andcamera modulemust bepurchased separately.

The most important features of the overlay

  • Support for cameras with parallel and MIPI interface (additional overlaywill be required for MIPI)
  • Support for cameras with pixel depth 8/10/12/14/16 bit
  • Stereoscopic mode for dual-camera system
  • IRCUT function control
  • Supported systems:Windows, Linux (including Raspberry Pi OS), ROS
  • Supported programming languages: C/C++, Python
Nakładka wraz z kamerą firmy ArduCam.

Overlay with ArduCam camera.

Changing the camera connected to the overlay

Each of the recommended cameras has adedicatedconfiguration file that should be loaded into the overlay software. In the case of connecting another camera, theconfigurationfile loaded in the software should also be changed. All necessary files and software can be found inthemanufacturer'srepositoryonGitHub. The list of cameras cooperating with the overlay can be found onthe manufacturer's website.

Video showing how the initial configuration of cameras connected to the overlay looks like.

Technical specification

  • Output/input voltage standard: 3,3 V
  • Energy consumption: 5 V / 300 mA
  • Throughput: 5 Gb/s
  • The data bus: 16-bit@100MHz
  • Connector: microUSB 3.0
  • Operating temperature: -10°C to 55°C

Set contains

  • 1x USB 3.0 overlay for ArduCam cameras
  • 1x USB 3.0 cable

Interface USB
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: