- New
Filament Fiberlogy Refill Easy PETG 1,75mm 0,85kg - Burgundy TR
Index: FLA-17492
- Reduced price
- Promotion
Raspberry Pi 3B+ GPIO extensions and HAT - Strona 7
Loading...
RS485 CAN HAT - overlay for Raspberry Pi - Waveshare 14882
Shield for Raspberry Pi, version 4B / 3B+ / 3B / 2B / Zero / Zero W with system SN65HVD230 which allows communication between CAN and SPI and the SP3485 system that...
Index: WSR-12532
Index: WSR-12532
Module ProtoPi Plus - extension for Raspberry Pi 4/3/2/B + to breadboard + ribbon wire
The module provides easy connection of all GPIO leads of the Raspberry minicomputer, version 4, 3, 2 and B+ with any breadboard, no soldering needed.
Index: MOD-02607
Index: MOD-02607
RPi Relay Board - 3 relays - cap for Raspberry Pi - Waveshare 11638
Cap fitted to connectors of Raspberry Pi GPIO in version 4B, 3B+, 3B, 2B, B+ and A+, with three relays with parameters of 250 V / 10 A. Board has a screw connector....
Index: WSR-06804
Index: WSR-06804
ADS1015 - ADC 12-bit 4-channel I2C converter - Adafruit 1083
Module with analog-to-digital converter with 12-bit accuracy. Operates at speed up to 3300 samples per second. Has the ability to change the amplification up to 16 x. It is...
Index: ADA-02618
Index: ADA-02618
MCP4725 DAC I2C converter - SparkFun BOB-12918
Digital-to-analog converter with I2C interface. The module allows you to receive signal in the form of analog voltage from any microcontroller that has I2C. It is powered with...
Index: SPF-02275
Index: SPF-02275
LTE GPS HAT - NB-IoT / LTE / GPRS / GPS SIM7000E - for Raspberry Pi 3B+/3B/2B/Zero - Waveshare 14865
Shield for Raspberry Pi that allows you to send text messages in the GSM network. It also has a GPS and LTE module. It communicates via serial interface UART (RX, TX) using the...
Index: WSR-12531
Index: WSR-12531
ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier STEMMA QT/Qwiic- Adafruit 1085
Module with analog to digital converter with 16-bit precision. Running at a speed of up to 860 samples per second. It has the ability to change the amplification of up to 16 x....
Index: ADA-08444
Index: ADA-08444
Argon ONE M.2 SATA expansion board - for Raspberry Pi 4B
Argon One M.2 is an expansion board for Argon One cases. It allows you to run your Raspberry Pi using an M.2 SATA SSD , which provides faster boot up and more capacity . It...
Index: ARG-18766
Index: ARG-18766
NB-IoT HAT -GSM SIM7020E - Hat for Raspberry Pi 4B/3B+/3B/2B/Zero - Waveshare 15936
NB-IoT overlay for Raspberry Pi, which allows for creating GSM network connections . Supports communication protocols such as LWM2M/COAP/MQTT . Communicates via serial...
Index: WSR-14779
Index: WSR-14779
THT 26pin prototype board with screw connectors for Raspberry Pi
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer. It has soldered screw connections and goldpin...
Index: MOD-05662
Index: MOD-05662
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
Traffic HAT - LED module with for Raspberry Pi
Shield for Raspberry Pi, along with three large LEDs, push button and buzzer for self-assembly. It can be programmed in any language for the Raspberry Pi.
Index: SUP-13471
Index: SUP-13471
Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.
Index: SEE-04451
Index: SEE-04451
Case for HiFiBerry Digi +, DAC + RCA and Raspberry Pi Model 3/2/B+ - transparent
Transparent case for Raspberry Pi minicomputer in version B2, B3 and B+, as well as the shields from the HiFiBerry Digi+, DAC+ series, with external dimensions of 98 x 67 x...
Index: RHF-09544
Index: RHF-09544
A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi
The new version of the module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS. Based on Quectel M95, it allows for voice calls, sending SMS...
Index: ITB-10243
Index: ITB-10243
PiJuice Zero - A Portable Power Platform for Raspberry Pi Zero
Portable power platform for Raspberry Pi Zero minicomputers. When connected to any power source, it acts as a wireless UPS . It uses intelligent power management...
Index: SUP-17486
Index: SUP-17486
Pirate Audio Speaker -speaker with display - DAC for Raspberry Pi - Pimoroni PIM485
DAC amplifier cap for Raspberry Pi minicompouter. It has a built-in 1 W / 8 Ω speaker and a 1.3" colour IPS display. Additionally, the board is equipped with 4...
Index: PIM-15897
Index: PIM-15897
E-paper E-Ink flexible display (D) 2,13'' 212x104px HAT for Raspberry Pi - Waveshare 15084
Shield for Raspberry Pi with a flexible display e-paper of 2.13 " with a resolution of 212 x 104 pixels. It is connected directly to GPIO pins. It communicates via SPI...
Index: WSR-13457
Index: WSR-13457
PiUART - USB - USB-UART converter for Raspberry Pi - Adafruit 3589
Miniature shield for Raspberry Pi which is also a converter of USB-UART. Connected directly to GPIO pins. The module also has a power switch. It is compatible with Raspberry Pi...
Index: ADA-09816
Index: ADA-09816
Explorer HAT Pro - prototype overlay for Raspberry Pi 4B/3B+/3B/2B
Shield for Raspberry Pi with breadboard, digital inputs and outputs, capacitive touch pads, colorful LEDs, analog inputs and motor controllers. Perfect for making small robots,...
Index: PIM-11467
Index: PIM-11467
GPIO to FPC Breakout pHAT for Raspberry Pi
Trim wyprowadzająca 40-pin GPIO connector on the FPC so that you can connect sensors, wires, etc, with the Raspberry Pi Board. It allows also connection of the display...
Index: SUP-14228
Index: SUP-14228
Raspberry Pi Zero 2W to 3B Adapter - Waveshare 22383
Using the Waveshare adapter, it is possible to mount the Raspberry Pi Zero 2 W on a Raspberry Pi 3B -shaped board. The Raspberry Pi Zero 2 W board is attached to the adapter...
Index: WSR-21701
Index: WSR-21701
PiMoroni - 4x display 14-segments I2C module for Raspberry Pi
Module with four 14-segment displays with green LEDs. It is based on the HT16K33 system, controlled through an I2C interface. It is compatible with minicomputer Raspberry Pi.
Index: PIM-13856
Index: PIM-13856
- EOL
Flat HAT Hacker - for Raspberry Pi 400 - Pimoroni PM536
Overlay produced by Pimoroni. The Flat HAT Hacker overlay allows access to GPIO pins from Raspberry Pi 400 , which are difficult to access due to their 90° location in the...
Index: PIM-18899
Index: PIM-18899
