- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
USB-C Host Shield - hat for Arduino - MAX3421E - SparkFun DEV-21247
Index: SPF-22824
- Reduced price
- Promotion
Filament Polymaker PolyTerra PLA 1,75mm, 1kg - Sunrise Orange
Index: PLM-22647
- Reduced price
- Promotion
Motor drivers and servos - Strona 9
Loading...
The Motoron M2S18v18 DC motor driver created by Pololu allows you to control two motors. The driver input voltage is between 6.5V and 30V and the maximum continuous output...
Index: PLL-21985
Index: PLL-21985
The Motoron M2S24v14 motor controller created by Pololu allows you to control two high-power DC motors. The driver input voltage is between 6.5V and 40V and the maximum...
Index: PLL-21986
Index: PLL-21986
DRV8434A stepper motor driver 48V/2A - Pololu 3764
Stepper motor driver module based on the DRV8434A chip from Texas Instruments. It allows you to control a motor with a maximum current consumption of up to 2 A per coil,...
Index: PLL-22217
Index: PLL-22217
DRV8434S stepper motor driver 48V/2A SPI with potentiometer - Pololu 3766
Stepper motor driver module based on the DRV8434S chip from Texas Instruments. It is powered with the voltage in the range from 4.5 V to 48 V. It offers a wide range of step...
Index: PLL-22218
Index: PLL-22218
M2T256 - two-channel motor controller 48V/1,8A - I2C interface - Pololu 5065
A driver based on the M2T256 system that allows you to control two DC motors using the I2C interface . The M2T256 can work with motors supplied with a voltage of 4.5 V to...
Index: PLL-22592
Index: PLL-22592
M1T256 - single-channel motor controller 48V/2,2A with connectors - I2C interface - Pololu 5060
A driver based on the M1T256 chip that allows you to control one DC motor using the I2C interface . The module can work with motors supplied with a voltage of 4.5 V to 48...
Index: PLL-22770
Index: PLL-22770
Panel/wall controller for electric motors 12-48V DC 32 A RC-LCD - Elektrobim
The RC-LCD is a panel wall controller manufactured by Elektrobim. It is used to control electric actuators, which are powered by 12 V to 48 V DC . The RC-LCD can be used in...
Index: ELB-20044
Index: ELB-20044
TB67S249FTG - Stepper Motor Driver 47V/1,6A with headers - Pololu 3097
Stepper motor driver based on the chip TB67S279FTG. Powered by a voltage range of 10 - 47 V, with a maximum current consumption of 4.5 A per coil. Maximum resolution: 1 /...
Index: PLL-13680
Index: PLL-13680
DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 1.5 A). Power supply from 2.0 to 11 V.
Index: PLL-00851
Index: PLL-00851
DRV8825 - stepper motor driver 45V / 2,2A - Pololu 2133
Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling up to 2.2 A) per coil, when...
Index: PLL-01324
Index: PLL-01324
VNH5019 2-channel motor driver 24V/12A - Shield for Arduino - Pololu 2507
Shield for Arduino with two drivers of DC motors VNH5019. The module operates with voltages between 5.5 V up to 24 V. Maximum continuous output current is 12 A (short-term: 30...
Index: PLL-02262
Index: PLL-02262
DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.
Index: PLL-02695
Index: PLL-02695
L298N - two-channel motor controller - 12V/2A
Module with dual-channel driver for DC motors L298. It is supplied with the voltage up to 12 V. Maximum current per channel is 2 A. The system has embedded voltage regulator 5...
Index: MOD-03164
Index: MOD-03164
PWM motor driver DC 6-24V/3A/72W - with a speed control knob
Module with built-in rotary potentiometer for DC motor speed control by filling the PWM signal. It operates with motors from 6 V to 24 V up to 72 W (current consumption up to 3...
Index: PLL-06667
Index: PLL-06667
DRV8833 DC/Stepper Motor Driver Breakout Board - Adafruit 3297
Dual channel DC motor controller. Continuous current per channel 1.2 A (momentary up to 2 A). Supply voltage ranges from 2.7 V to 10.8 V.
Index: ADA-07665
Index: ADA-07665
Stepper motor driver L9110 12V/0,8A
The driver module uses L9110 chips to control one stepper motor or two DC motors. Supply voltage is from 3 V to 12 V. Continuous current up to 800 mA.
Index: MOD-09820
Index: MOD-09820
MP6500 - stepper motor driver 35V / 2.5A - with analog current control - Pololu 2966
Stepper motor driver based on MP6500 chip . Powered by a voltage range of 4.5 - 35 V, with a maximum current consumption of 2.5 A per coil. Maximum resolution: 1/8 step. The...
Index: PLL-10881
Index: PLL-10881
MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered) - Pololu 2969
Stepper motor driver based on MP6500 chip. Powered by a voltage range from 4.5 V to 35 V , with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8 step....
Index: PLL-12843
Index: PLL-12843
Motor and servo driver for Micro:Bit - Waveshare 15220
Expansion board for module Micro:bit. It allows you to control 2 DC motors and 3 servos through the I2C interface with 12-bit resolution for each channel. It powers the motors...
Index: WSR-13303
Index: WSR-13303
Servo 2040 - 18 Channel Servo Controller - Pimoroni PIM613
Servo 2040 is a servo driver manufactured by PiMoroni. It has 18-channels that allow you to control up to 18 servos simultaneously . What's more, it also supports...
Index: PIM-21462
Index: PIM-21462
MOSFET driver with N channel - for motors, solenoids, LEDs - STEMMA JST PH 2mm - Adafruit 5648
N-channel MOSFET (also called transistor) driver from Adafruit, featuring the AO3406 chip. The module can be supplied with a voltage from 3 V to 30 V and controlled by a...
Index: ADA-22539
Index: ADA-22539
RoboClaw 2x15A USB V6B - dual channel 34V/15A motor controller - Pololu 3683
The RoboClaw module is an advanced DC motor controller that supports two motors with a maximum continuous current of 15 A per channel (30 A peak) and a voltage from 6 V...
Index: PLL-25109
Index: PLL-25109
Haptic Motor Driver - DRV2605L - SparkFun ROB-14538
SparkFun module with DRV2605L haptic motor controller. It can handle ERM and LRA motors. Operates from 2 V to 5.2 V. Communicates over I2C bus.
Index: SPF-08219
Index: SPF-08219
The General Driver board is a multifunctional driver based on the ESP32-WROOM-32 module, which offers a wide range of possibilities and allows you to expand the project with...
Index: WSR-22832
Index: WSR-22832
See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras and recorders
- Memory cards & disks
- Communication
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Integrated circuits
- Displays and screens
- Tablets and smartphones
- Consoles