- New
- Reduced price
- Sale
Motor drivers and servos - Strona 7
Loading...
SparkFun IoT Brushless Motor Driver is a controller designed to operate a three-phase BLDC brushless motor. It is equipped with the TMC6300 system from ADI + Trinamic, which...
Index: SPF-23977
Index: SPF-23977
High-Power 18v15 - single-channel 30V/15A motor controller - Pololu 755
Based on MOSFET transistors, the efficient H-bridge allows you to control the rotation of the motor in both directions. Power supply to motors: from 5.5 V to 30 V. Maximum...
Index: PLL-00744
Index: PLL-00744
Simple High-Power 18v7 - USB 30V/7A motor driver - assembled - Pololu 1372
Easy-to-use single-channel driver for DC motors. It communicates via the computer's USB port, UART TTL interface, analog signal or RC radio interface. The supply voltage is...
Index: PLL-00747
Index: PLL-00747
Simple High-Power 18v25 - USB 30V/25A motor driver - Pololu 1381
Easy to use single-channel direct current motor controller for self-assembly. It communicates through the USB port of the computer, UART TTL interface, analogue signal or RC...
Index: PLL-01808
Index: PLL-01808
A4990 2-channel motor driver 32V/0,65 A - Shield for Arduino - Pololu 2512
Module with two-channel A4990 circuit working with voltages from 6 V to 32 V and current up to 0.65 A per channel (max. 0.9 A). The chip can be connected directly to the...
Index: PLL-02675
Index: PLL-02675
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
AMIS-30543 - stepper motor driver 30V/3A SPI - Pololu 2970
Stepper motor driver, power voltage range from 6 V to 35 V, with maximum current consumption of 3A through the coil. The maximum resolution is 1/128 step. The module allows a...
Index: PLL-04085
Index: PLL-04085
MC33926 - two-channel motor controller 28V/3A - shield for Raspberry Pi - Pololu 2755
Module with dual MC33926 driver of motors, working with voltages from 5 V to 28 V and current up to 3 A per channel (max. 5 A). The shield can be linked directly with...
Index: PLL-04231
Index: PLL-04231
MC33926 - dualchannel motor driver 28V/3A - shield for Raspberry Pi 3/2/b+ - assembled - Pololu 2756
Module with dual MC33926 driver of motors, working with voltages from 5 V to 28 V and current up to 3 A per channel (max. 5 A). The shield can be linked directly with...
Index: PLL-04346
Index: PLL-04346
A-Star 32U4 Robot Controller SV 36V/1.7A - extension to Raspberry Pi - Pololu 3119
Programmable system equipped with the famous from Arduino Leonardo, microcontroller Atmega32u4 with installed bootloader. It has dual driver of motors 36 V / 1,7 A and...
Index: PLL-05532
Index: PLL-05532
G2 High-Power 24v21 - single-channel motor controller 40V/21A - Pololu 2995
Single-channel high-performance DC motor controller. Continuous current per channel is 21 A (momentary up to 100 A), motor supply voltage from 6.5 V to 40 V, logical part...
Index: PLL-05722
Index: PLL-05722
G2 High-Power 18v25 - single-channel motor controller 30V/25A - Pololu 2994
Single-channel high-performance DC motor controller. Continuous current per channel is 25 A (momentary up to 100 A), motor supply voltage from 6.5 V to 30 V, logical part...
Index: PLL-05727
Index: PLL-05727
Tic T825 - USB stepper motor driver 45V / 2.5A - assembled - Pololu 3130
The stepper motor driver features a TI DRV8825 driver. It is powered from 8.5 - 45 V , with a maximum current consumption of 2.5 A per coil. Maximum resolution: 1/32...
Index: PLL-09468
Index: PLL-09468
G2 Dual High-Power 18v18 - 2-channel motor driver 30V/18A - Shield for Arduino - Pololu 2515
Shield with dualchannel driver of motors operating with voltages from 6.5 V up to 30 V and current up to 18 A per channel (max. 50 A). The system can be connected directly...
Index: PLL-10585
Index: PLL-10585
G2 Dual High-Power 24v14 - 2-channel motor driver 40V/14A - Shield for Arduino - Pololu 2516
Shield with dualchannel driver of motors operating with voltages from 6.5 V up to 40 V and current up to 14 A per channel (max. 40 A). The system can be connected directly with...
Index: PLL-10586
Index: PLL-10586
G2 Dual High-Power 18v22 - 2-channel motor driver 30V/20A - Shield for Arduino - Pololu 2517
Shield with dualchannel driver of motors operating with voltages from 6.5 V up to 30 V and current up to 22 A per channel (max. 60 A). The system can be connected directly with...
Index: PLL-10587
Index: PLL-10587
G2 Dual High-Power 24v18 - 2-channel motor driver 40V/18A - Shield for Arduino - Pololu 2518
Overlay with two-channel motor driver working with voltages from 6,5 V to 40 V and current up to 18 A per channel (max. 50 A). The chip can be connected directly to...
Index: PLL-10588
Index: PLL-10588
Shield with dual-channel driver pf motors operating with voltages from 6.5 V up to 30 V and current up to 18 A per channel (max 50 A). The system can be connected directly with...
Index: PLL-10589
Index: PLL-10589
Shield with dual-channel driver pf motors operating with voltages from 6.5 V up to 36 V and current up to 14 A per channel (max 40 A). The system can be connected directly with...
Index: PLL-10590
Index: PLL-10590
Shield with dual-channel driver pf motors operating with voltages from 6.5 V up to 30 V and current up to 22 A per channel (max 60 A). The system can be connected directly...
Index: PLL-10591
Index: PLL-10591
Shield with dual-channel driver pf motors operating with voltages from 6.5 V up to 30 V and current up to 18 A per channel (max 50 A). The system can be connected directly with...
Index: PLL-10592
Index: PLL-10592
MAX14870 - 2-channel motor driver 28V/1,7 A - Shield for Arduino - Pololu 2519
Modul with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be directly connected...
Index: PLL-11843
Index: PLL-11843
Module with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be connected...
Index: PLL-11844
Index: PLL-11844
MAX14870 - dual-channel motor driver 28V/1,7A - extension for Raspberry Pi 4/3+/3/2/B+ - Pololu 3758
Module with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be connected...
Index: PLL-11845
Index: PLL-11845
See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras
- Memory cards & disks
- Communication
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Integrated circuits
- Displays and screens
- Consoles