- New
- New
- On sale!
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Adhesive velcro with a buckle for Dualsky 280mm accumulators - 1pc
Index: AKC-08182
- Reduced price
- Promotion
- Reduced price
- Promotion
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Index: AKS-10816
- Reduced price
- Promotion
Motor drivers and servos - Strona 6
Loading...
Qwiic dual-channel motor controller - 11V / 1.2A - SparkFun ROB-15451
Dual channel DC motor driver module. Continuous current per channel is 1.2 A (temporary up to 1.5 A) . The device uses the I2C serial communication bus. The module is...
Index: SPF-21161
Index: SPF-21161
- Reduced price
- Promotion
M3S550 - triple motor controller DC 22V/1,7A - for Arduino - Pololu 5069
Shield designed to work with Arduino, which allows you to control three DC motors powered with voltage from 1.8 V to 22 V. It communicates via the I2C interface . The...
Index: PLL-23648
Index: PLL-23648
- Reduced price
- Promotion
SparkFun IoT Brushless Motor Driver is a controller designed to operate a three-phase BLDC brushless motor. It is equipped with the TMC6300 system from ADI + Trinamic, which...
Index: SPF-23977
Index: SPF-23977
TB6612FNG - two-channel driver for 15V/1.2A motors - SparkFun ROB-14451
Dual channel DC motor driver. The device operates on the basis of a PWM signal. The continuous current is 1.2 A (instantaneous 3.2 A). Supply voltage is from 2.7 V to 15 V ....
Index: SPF-10667
Index: SPF-10667
Gravity DFRobot IO Expansion + TB6612FNG 2-channel motor driver 12V/1.2 A - Shield for Arduino
Shield for Arduino which is an extension of the i/O pins and two-channel driver for DC motors TB6612FNG with a voltage of 12 V and performance of 1.2 A per channel. It also has...
Index: DFR-10828
Index: DFR-10828
Motor driver expansion board X-NUCLEO-IHM08M1 for STM32 Nucleo
Expander, X-NUCLEO-IHM08M1 extension board for STM32 Nucleo with a built-in STL220N6F7 controller to control a brushless DC three-phase motor.
Index: FAR-15166
Index: FAR-15166
Klip Motor Driver for BBC micro:bit - Kitronik 5655
An extension for the BBC micro:bit module, it has a two-channel DC motor controller , 3 pins I/O, ZIP LED connector and power outputs. All outputs are in the form of...
Index: KTR-16881
Index: KTR-16881
Panel/wall controller for electric motors 12-48V DC 32 A RC-LCD - Elektrobim
The RC-LCD is a panel wall controller manufactured by Elektrobim. It is used to control electric actuators, which are powered by 12 V to 48 V DC . The RC-LCD can be used in...
Index: ELB-20044
Index: ELB-20044
Arduino Nano Motor Carrier - motor driver for Arduino Nano 33 IoT - ABX00041
An overlay containing a DC motor driver and IMU sensor, designed for the Arduino Nano 33 IoT module. It is designed to help students prototype and create their own projects...
Index: ARD-20396
Index: ARD-20396
High-Power 18v15 - single-channel 30V/15A motor controller - Pololu 755
Based on MOSFET transistors, the efficient H-bridge allows you to control the rotation of the motor in both directions. Power supply to motors: from 5.5 V to 30 V. Maximum...
Index: PLL-00744
Index: PLL-00744
Simple High-Power 18v7 - USB 30V/7A motor driver - assembled - Pololu 1372
Easy-to-use single-channel driver for DC motors. It communicates via the computer's USB port, UART TTL interface, analog signal or RC radio interface. The supply voltage is...
Index: PLL-00747
Index: PLL-00747
MC33926 - two-channel 28V/2,5A motor controller
Module with two-channel driver of DC motors MC33926 working with voltages from 5 V to 28 V. The maximum continuous output current per channel is 2.5 A.
Index: PLL-00751
Index: PLL-00751
DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 1.5 A). Power supply from 2.0 to 11 V.
Index: PLL-00851
Index: PLL-00851
Simple High-Power 24v23 - single-channel USB 40V/23A motor driver - Pololu 1383
Easy to use single-channel direct current motor controller for self-assembly. It communicates through the USB port of the computer, UART TTL interface, analogue signal or RC...
Index: PLL-01002
Index: PLL-01002
Simple High-Power 18v25 - USB 30V/25A motor driver - Pololu 1381
Easy to use single-channel direct current motor controller for self-assembly. It communicates through the USB port of the computer, UART TTL interface, analogue signal or RC...
Index: PLL-01808
Index: PLL-01808
High-Power 36v20 - one-channel motor controller 50V/20A - Pololu 1457
Based on the transistors MOSFET an efficient H bridge allows you to control engine's rotations in both directions. Motor power supply: from 5.5 V to 50 V. Maximum current: 20 A.
Index: PLL-01847
Index: PLL-01847
Simple High-Power 24v12 - USB 40V/12A motor driver - assembled - Pololu 1378
Easy to use single-channel direct current motor controller. It communicates through the USB port of the computer, UART TTL interface, analogue signal or RC radio interface....
Index: PLL-02001
Index: PLL-02001
A4990 - two-channel motor driver 32V/0,7A - Pololu 2137
Polol module with a two-channel direct current motor controller. It works with voltages of 6 - 32 V , maximum continuous current per channel is 0.7 A.
Index: PLL-02038
Index: PLL-02038
DRV8835 dual - 2-channel motor driver 11V/1,2 A - Shield for Arduino - Pololu 2511
Dual channel DRV8835 module operates with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). The chip can be connected directly to Arduino board.
Index: PLL-02671
Index: PLL-02671
A4990 2-channel motor driver 32V/0,65 A - Shield for Arduino - Pololu 2512
Module with two-channel A4990 circuit working with voltages from 6 V to 32 V and current up to 0.65 A per channel (max. 0.9 A). The chip can be connected directly to the...
Index: PLL-02675
Index: PLL-02675
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
Stepper motor driver A4988 RepRap - green
Stepper motor driver based on the A4988 system. Voltage supply in the range from 8V to 35 V, with maximum current consumption of 1 A per coil. Maximum resolution: 1/16 of a...
Index: MOD-02964
Index: MOD-02964
AMIS-30543 - stepper motor driver 30V/3A SPI - Pololu 2970
Stepper motor driver, power voltage range from 6 V to 35 V, with maximum current consumption of 3A through the coil. The maximum resolution is 1/128 step. The module allows a...
Index: PLL-04085
Index: PLL-04085
MC33926 - two-channel motor controller 28V/3A - shield for Raspberry Pi - Pololu 2755
Module with dual MC33926 driver of motors, working with voltages from 5 V to 28 V and current up to 3 A per channel (max. 5 A). The shield can be linked directly with...
Index: PLL-04231
Index: PLL-04231
See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras and recorders
- Memory cards & disks
- Communication
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Integrated circuits
- Displays and screens
- Tablets and smartphones
- Consoles
