- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
Motor drivers and servos - Strona 8
Loading...
TB67S279FTG Stepper Motor Driver Carrier 47V/2A - Pololu 2974
Stepper motor driver based on TB67S279FTG chip . Powered by a voltage range of 10 - 47 V , with a maximum current consumption of 2 A per coil. Maximum resolution: 1 /...
Index: PLL-12227
Index: PLL-12227
TB9051FTG Hat two-channel driver for motors 28V / 2.6A - shield for Raspberry Pi - Pololu 2761
Module with dual-channel driver of motors TB9051FTG working with voltages from 4.5 V to 28 V and current up to 2,6 A per channel (max 5 A). The system can be connected directly...
Index: PLL-12433
Index: PLL-12433
Module with dual-channel driver of motors TB9051FTG working with voltages from 4.5 V to 28 V and current up to 2,6 A per channel (max 5 A). The system can be connected directly...
Index: PLL-12434
Index: PLL-12434
JRK G2 21v3 USB - single-channel motor driver with 28V / 2.6A feedback - Pololu 3142
Extremely easy to use motor controller with feedback support. Available communication interfaces: USB, TTL, I2C, analog and radio. Supply voltage is from 4.5 V to 28 V and...
Index: PLL-12436
Index: PLL-12436
JRK G2 21v3 USB - single-channel motor driver with 28V / 2.6A feedback - assembled - Pololu 3143
Extremely easy to use motor controller with feedback support. Available communication interfaces: USB, TTL, I2C, analog and radio. Supply voltage is from 4.5 V to 28 V and...
Index: PLL-12437
Index: PLL-12437
Motor and servo driver for Micro:Bit - Waveshare 15220
Expansion board for module Micro:bit. It allows you to control 2 DC motors and 3 servos through the I2C interface with 12-bit resolution for each channel. It powers the motors...
Index: WSR-13303
Index: WSR-13303
TB67S279FTG Stepper Motor Driver 47V/1,1A - Pololu 3098
Stepper motor controller based on TB67S279FTG . Powered by 10 - 47 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1 / 32 steps. Thanks to the...
Index: PLL-13425
Index: PLL-13425
TB67S279FTG - stepper motor driver 47V/1,6A - Pololu 3096
Stepper motor driver based on TB67S279FTG chip . Powered by a voltage range of 10 - 47 V, with a maximum current consumption of 4.5 A per coil. Maximum resolution: 1 / 32...
Index: PLL-13426
Index: PLL-13426
High-Power Simple Motor Controller G2 24v19 - 40V/19A engine controller - Pololu 1367
Single channel powerful DC motor controller. It can be easily programmed via microUSB connector and dedicated application. Continuous current per channel is 19 A, motor supply...
Index: PLL-13427
Index: PLL-13427
High-Power Simple Motor Controller G2 18v25 - 30V/25A motor controller - Pololu 1366
Single channel powerful DC motor controller. It can be easily programmed via microUSB connector and dedicated application. Continuous current per channel is 25 A, motor supply...
Index: PLL-13428
Index: PLL-13428
High-Power Simple Motor Controller G2 24v12 - 40V/12A - Pololu 1365
Single channel powerful DC motor controller. It can be easily programmed via microUSB connector and dedicated application. Continuous current per channel is 12 A, motor supply...
Index: PLL-13429
Index: PLL-13429
High-Power Simple Motor Controller G2 24v12 - 40V/12A - mounted - Pololu 1364
Single channel powerful DC motor controller. It can be easily programmed via microUSB connector and dedicated application. Continuous current per channel is 12 A, motor supply...
Index: PLL-13430
Index: PLL-13430
High-Power Simple Motor Controller G2 18v15 - motor controller 30V/15A - assembled - Pololu 1362
Single channel powerful DC motor controller. It can be programmed via microUSB connector and dedicated application. Continuous current per channel is 159 A, motor supply...
Index: PLL-13432
Index: PLL-13432
STSPIN820 Stepper Motor Driver Carrier with headers - Pololu 2879
Stepper motor driver based on the STSPIN820 chip. It is powered from 7 V to 45 V, with maximum current consumption of 0.9 A per coil without heatsink (momentary up to 1.5 A)....
Index: PLL-13679
Index: PLL-13679
TB67S279FTG - Stepper Motor Driver 47V/1,1A - with holders - Pololu 3099
Stepper motor driver based on the chip TB67S279FTG. Powered by a voltage range from 10 V to 47 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1...
Index: PLL-13681
Index: PLL-13681
STSPIN820 Stepper Motor Driver Carrier - Pololu 2878
Stepper motor driver based on the STSPIN820 chip. It is powered from 7 V to 45 V, with maximum current consumption of 0.9 A per coil without heatsink (momentary up to 1.5...
Index: PLL-13682
Index: PLL-13682
TB67S128FTG - stepper motor driver 44V/2,1A - Pololu 2998
Stepper motor controller with Toshiba TB67S128FTG , which allows you to adjust the current limitation and step resolution to 1/128. 6.5 V to 44 V power supply, maximum...
Index: PLL-17160
Index: PLL-17160
Tic 36v4 - USB stepper motor driver 50V/4A - soldered - Pololu 3140
MOSFET transistor based stepper motor controller Tic 36v4. It works with voltage from 8 V to 50 V with consumption of up to 4 A current without cooling. Maximum step...
Index: PLL-17164
Index: PLL-17164
DRV8256P - single-channel motor controller 48V/1,9A - Pololu 4039
A small, single channel DRV8256E motor driver created by Pololu. The module is powered from 4.5 V to 48 V. Continuous current per channel is 1.9 A (momentary up to 6.4 A...
Index: PLL-20440
Index: PLL-20440
Motoron M3S256 - 3 channel motor controller - 48V/2A - shield for Arduino - assembled - Pololu 5030
Three -channel motor driver for Motoron M3S256 manufactured by Pololu. The input voltage of the controller is in the range from 4.5 V to 48 V , the continuous current...
Index: PLL-21356
Index: PLL-21356
Three -channel motor driver for Motoron M3S256 from Pololu. The input voltage ranges from 4.5 V to 48 V with a continuous current consumption of up to 2 A , momentary (for...
Index: PLL-21358
Index: PLL-21358
The Motoron M3H256 from Pololu is a three-channel driver for DC motors in the form of an overlay for Raspberry Pi minicomputers, version B + and newer. The supply voltage of...
Index: PLL-21621
Index: PLL-21621
Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi - soldered - Pololu 5034
The Motoron M3H256 is a three-channel driver for DC motors manufactured by the Pololu company. Input voltage for powering DC motors should be in the range from 4.5 V to 48 V...
Index: PLL-21623
Index: PLL-21623
The engine driver designed by Pololu is a module in the form of an overlay for Raspberry Pi minicomputers. The module has a 40-pin connector to which you can connect other...
Index: PLL-21979
Index: PLL-21979
See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras
- Memory cards & disks
- Communication
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Integrated circuits
- Displays and screens
- Consoles