- New
Switches and buttons - Strona 6
Loading...
DFRobot Gravity - digital blue button
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-08045
Index: DFR-08045
TPL5110 Low Power Timer Breakout - Adafruit 3435
Module that allows to reduce the energy consumption of any project because of its cyclic turning off and on. It works with delays from the "every 100 ms" to "every 2 hours". It...
Index: ADA-08442
Index: ADA-08442
Tact Switch Buttons Kit - 140pcs
Set of 140 Tact Switch buttons . There are 14 different versions in the set.
Index: SWT-09781
Index: SWT-09781
Monostable ON-OFF switch - PBW-16BP - 2A 250V - protruding red round
Monostable salient switch with the red backlight in the shape of a ring. Contact load is 2 A for 250 V.
Index: AKS-10814
Index: AKS-10814
- Sale
- SPECIAL OFFERS
DFRobot Gravity - digital button Tact Switch - green
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-11276
Index: DFR-11276
Velleman WPM411 - executive module MOSFET IRF520 24V / 5A
The executive module with the MOSFET transistor with the N channel to control the devices with higher current consumption than allowed by the control system, for example, a...
Index: VEL-12202
Index: VEL-12202
Large switch Slide MOSFET MP 4,5-40V/8A - with protection before reverse current - Pololu 2814
The executive module with a MOSFET transistor with a pair of channels P to control devices with higher current consumption than allowed by the control system, for example, a...
Index: PLL-05119
Index: PLL-05119
Rotary switch 3-position 4 circuits - 37mm
Rotary switch, 3-state for the case, equipped with 16 contacts. The total height is 37 mm.
Index: UCC-06146
Index: UCC-06146
- Sale
- SPECIAL OFFERS
Slide switch SS22T35 2-position - 5pcs.
Slide switch, straight, to print with the size of 9 x 7 x 5.5 mm. Pins pitch: 2.50 mm.
Index: UCC-08052
Index: UCC-08052
- Sale
- SPECIAL OFFERS
Gravity: Conductivity Sensor Switch - DFRobot
The module that is able to determine whether the object has an electric conductivity. The maximum detection value is 10 MΩ. After electric conductivity detection, the module...
Index: DFR-08111
Index: DFR-08111
ON-OFF switch monostable - PBW-16BP - 2A 250V flat
Monostable, flat switch with contact rating of 2 A for 250 V.
Index: NSZ-09796
Index: NSZ-09796
Mini switch Slide MOSFET SV 4,5-40V/4A - with protection before reverse current - Pololu 2811
The executive module with a MOSFET transistor with a pair of channels P to control devices with higher current consumption than allowed by the control system, for example, a...
Index: PLL-04853
Index: PLL-04853
Large switch Push MOSFET MP 4,5-40V/8A - with protection before reverse current - Pololu 2812
The module with a button as an alternative to the mechanical buttons. The switch is bistable, one push turns on the power, and one more press turns it off. Additional inputs...
Index: PLL-05118
Index: PLL-05118
Rotary switch 12-position / 1 circuit - 37mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 37 mm.
Index: UCC-06148
Index: UCC-06148
- Sale
- SPECIAL OFFERS
ON-OFF Switch PBS 11A, 250V/1A - green
Bistable switch with a circular attachment with the contacts' loading capacity of 1 A for 250 V or 3 A for 125 V.
Index: UCC-08387
Index: UCC-08387
ON-OFF switch monostable - PBW-12B - 2A 250V flat
The monostable flat switch with the load capacity of the contacts: 2 A for 250 V.
Index: NSZ-09793
Index: NSZ-09793
- Sale
- SPECIAL OFFERS
ON-OFF bistable switch - PBW-16AP - 2A/250V - flat green round
Flat bistable button with red illumination in the form of the ring. Contact load is up to 2 A for 250 V.
Index: AKS-10809
Index: AKS-10809
- Sale
- SPECIAL OFFERS
DFRobot Gravity - digital button Tact Switch - red
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-11277
Index: DFR-11277
Mini Keyboard CardKB V1.1 ATmega8A expansion Unit for M5Stack development modules - U035-B
Mini Keyboard CardKB version V1.1 equipped with ATmega8A MCU. Despite its small size of 88 x 54 x 5 mm , it can also be implemented as a fully functional QWERTY...
Index: MSS-21897
Index: MSS-21897
Thumb Joystick with button - SparkFun COM-09032
A joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions and the button is activated...
Index: SPF-01634
Index: SPF-01634
DFRobot LED Keypad Shield - Shield for Arduino
Shield for Arduino with 4-digit ,8-segment display with common cathode. In addition, the board has 5 buttons. The device operates with 5 V voltage.
Index: DFR-05516
Index: DFR-05516
TTP224 4-way Capacitive Touch Switch Module
Capacitive touch sensor based on the TTP224 module. It is powered by a voltage from 2.4 V to 5.5 V, the output is a digital signal. It has 4 buttons with LED signaling.
Index: MOD-08235
Index: MOD-08235
Arcade Concave Button 3,5cm - green - SparkFun COM-09341
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10083
Index: SPF-10083
ON-OFF switch monostable - PBW-16BP - 2A 250V - green round
Monostable salient switch with the green backlight in the shape of a ring. Contact load is 2 A for 250 V.
Index: AKS-10815
Index: AKS-10815
- Sale
- SPECIAL OFFERS