Switches and buttons - Strona 15
Switch SPST (ON-OFF) - ignition switch - with keys
SPST (ON-OFF) switch in the form of an ignition to switch on devices. The set includes two keys. The switch is made of plastic, its external diameter is 14 mm.Switch On-Off IRS-101-8C/D 12VDC/20A with lightning - green
Switch, type on-off with the built-in backlight. The load capacity of the contacts is 12 V / 20 A.Switch ON-OFF PBS26B 250V/3A - black
Switch with a round attachment with the contact's loading capacity of 3 A for 250 V.ON-OFF momentary switch PBS-28B 250V / 2A - silver
Temporary, round switch with a loading capacity of contacts: 2 A for 250 V.Arcade Concave Button 3.5cm - blue - SparkFun COM-09337
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.Tact Switch 12x12mm/7mm THT 4-pin - black - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is in black color.ON-OFF switch monostable - 3A / 220V - flat - blue + resistor
A flat, monostable switch with blue lighting. Load capacity of the contacts 3 A for 220 V . Resistor 100 kΩ included.- EOL
DFRobot Gravity - digital button Tact Switch - yellow
Digital monostable switch with 3-pin connector . It is powered from 3.3V to 5V and works with Arduino modules.Big Push Button 6cm - white - inclined
Big flat button with an outer diameter of 6 cm with the built-in LED illuminating the dome.Push button 10cm - green - flat
Big button with an outer diameter of 10 cm with the built-in green LED illuminating the dome.Grove - push button with backlight - red
Module from the Grove is equipped with a button with a yellow led. It is powered with the voltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...Monostabile switch PB07C 7x7mm - 5pcs
The monostable switch PB07C has dimensions of 7 x 7 mm. It has 6 leads that can be soldered into the PCB. The voltage of the switch is 30 V. The monostable button is an...Adafruit MacroPad RP2040 Starter Kit - 3x4 Keys + Encoder + OLED - ADABOX019 - Adafruit 5128
MacroPad is a pushbutton board allowing to assign the execution of a given system function or application to a button from the board (so called macros). The module is based on...- EOL
Qwiic Keypad - 12 Button - SparkFun COM-15290
Keyboard module with ATtiny84 microcontroller . In firmware, the FIFO stack stores the last 15 input data. When the stack is full, all previous input is overwritten. The...Kailh Mechanical Key Switches - Linear - small mechanical keys - red - 10pcs. - Adafruit 4952
A set of 10 red mechanical switches that can be used for a wide range of projects, e.g. when building a proprietary, non-standard mechanical keyboard. The Linear buttons...Gravity - RGB LED button - DFRobot DFR0991
Module with a button from DFRobot. Thanks to the built-in RGB LED, the button is illuminated in different colors . The module has a built-in Gravity connector with an I2C...Black Rubber Joystick Nubbin Cap - black - 1pcs - Adafruit 4697
The black rubber joystick cover is a designer finishing touch to any 5-way navigation joystick project. Moreover, it is also easy to clean - just wipe it with a slightly...Mini Analog Thumbstick - Analog Joystick - Adafruit 5628
A compact mini joystick manufactured by Adafruit. It is a simple control device in the form of a knob with which you can move in two axes - X and Y , it can also be...Arcade Concave Button 3,5cm - green - SparkFun COM-09341
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.MPR121 I2C touch module - 12 buttons - Adafruit 1982
The module with the MPR121 system that implements 12 of the capacitive touch buttons. Pins can be connected to any of the objects conducting the electric current. The board...