- New
Switches and buttons - Strona 7
ON-OFF switch monostable - PBW-16BP - 2A 250V flat
Monostable, flat switch with contact rating of 2 A for 250 V.Grove - push button with backlight - red
Module from the Grove is equipped with a button with a yellow led. It is powered with the voltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...Silicone Elastomer 4x4 keyboard overlay - Adafruit 1611
Made of flexible silicone keyboard overlay from Adafruit. It consists of 16 buttons in a 4x4 arrangement. An LED can be mounted under each button in a 3mm scroll...NeoTrellis RGB Driver PCB - 4x4 keyboard with backlit keys - Adafruit 3954
NeoTrellis RGB Driver PCB keyboard with 16 buttons arranged in 4 columns by 4 rows. Each button is illuminated with a separate RGB LED, so the keys can glow in different...Tact Switch 12x12mm - round - collored buttons - 15 pcs
A set of 15 colored Tact Switch buttons with dimensions of 12 x 12 mm with THT leads in 6 colors. Tact Switch buttons are clickable input elements designed to create...Mini switch Slide MOSFET SV 4,5-40V/4A - with protection before reverse current - Pololu 2811
The executive module with a MOSFET transistor with a pair of channels P to control devices with higher current consumption than allowed by the control system, for example, a...Large switch Push MOSFET MP 4,5-40V/8A - with protection before reverse current - Pololu 2812
The module with a button as an alternative to the mechanical buttons. The switch is bistable, one push turns on the power, and one more press turns it off. Additional inputs...Rotary switch 12-position / 1 circuit - 37mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 37 mm.ON-OFF switch monostable - PBW-12B - 2A 250V flat
The monostable flat switch with the load capacity of the contacts: 2 A for 250 V.ON-OFF bistable switch - PBW-16AP - 2A/250V - flat green round
Flat bistable button with red illumination in the form of the ring. Contact load is up to 2 A for 250 V.DFRobot Gravity - digital button Tact Switch - red
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.Grove - push button with backlight - blue
Module from the Grove is equipped with a button with a blue LED. Powered with the v oltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...Mini Keyboard CardKB V1.1 ATmega8A expansion Unit for M5Stack development modules - U035-B
Mini Keyboard CardKB version V1.1 equipped with ATmega8A MCU. Despite its small size of 88 x 54 x 5 mm , it can also be implemented as a fully functional QWERTY...DIP switch 6-pole - red - 5 pcs.
Slide switch, board with six levers. Leads raster: 2.54 mm Height: 5.5 mm. Price for 5 pieces.Thumb Joystick with button - SparkFun COM-09032
A joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions and the button is activated...TTP224 4-way Capacitive Touch Switch Module
Capacitive touch sensor based on the TTP224 module. It is powered by a voltage from 2.4 V to 5.5 V, the output is a digital signal. It has 4 buttons with LED signaling.Arcade Concave Button 3,5cm - red - SparkFun COM-09336
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.Arcade Concave Button 3,5cm - green - SparkFun COM-09341
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.ON-OFF switch monostable - PBW-16BPD - 2A 250V - flat green point
Monostable flat switch with the green point backlight. Contact load is 2 A for 250 V.- Sale
- SPECIAL OFFERS
Grove - mini limit sensor with roller
Module from the Grove series equipped with a limit switch with lever ended with roller. Working voltage is 3.3 V and 5 V. T he kit includes a cable adapted to Seeedstudio Base...Monostabile switch PB07C 7x7mm - 5pcs
The monostable switch PB07C has dimensions of 7 x 7 mm. It has 6 leads that can be soldered into the PCB. The voltage of the switch is 30 V. The monostable button is an...Kailh Mechanical Key Switches - Clicky - small mechanical button - blue - 1pc. - Adafruit 5123
The blue Clicky type mechanical switch is used in the implementation of a wide range of projects, e.g. when building a proprietary, non-standard mechanical keyboard. The...
