Description
Switch with lever equipped with 2 contacts with load capacity 20 A and 12 V. Leads raster is 24,2 mm, total height 66 mm. The switch has a yellow backlight. The LED is powered by 3 V.
Connection
- The ON/OFF switch is controlled by two pins on the bottom.
- If the LED should shine all the time, the voltage from 3 V to 12 V should be connected between ground and a pin of the headlight.
- If the LED is to light only when the switch is connected, a voltage of 3 V to 12 V must be applied to the (+) pin and ground must be connected to the ground pin.
Specifications
- Number of positions: 2
- Number of contacts: 2
- Pinout Raster: 24.2 mm
- Type: On-Off for soldering the wires
- Backlight colour: yellow
- Current-carrying capacity: 12 V / 20 A (recommended 1-2 A)
- LED supply voltage: 3 V to 12 V
- Dielectric strength: 1500 VAC - 1 min
- Insulation R: 500 VDC 100 M min
- Life time: 10 000 cycles
- Operating temperature: -25 °C to 85 °C
- Dimensions: 66 x 50 x 20 mm
- Weight: 38 g
Useful links |
