Switches and buttons - Strona 5
SM12F11G7 2-position slide switch - 10pcs.
Slide switch, straight to print with dimensions 23 x 14 x 7.4 mm. Lead spacing 4.20 mm.Makey Makey - version Classic - by JoyLabz - SparkFun KIT-14478
This kit consists of USB board and cables, allows you to create keyboard of any items, such as chagning the stairs into piano or making the gamepad from the fruits. The device...Push button 10cm - green - flat
Big button with an outer diameter of 10 cm with the built-in green LED illuminating the dome.Numeric keypad, self-adhesive, 12 keys
Simple numeric keyboard with the numbers from 0 to 9 and the signs: * and #. The reverse side has a self-adhesive tape for facilitating the installation.Grove - module with MOSFET transistor
It allows for turning on and off devices that require power from 5V to 15V with a digital signal. Switching frequency up to 5 MHz. It has two mounting holes, two ARK...Switch ON-OFF round 250V/1A - red
Switch with a round attachment with the contact's loading capacity of 1 A for 250 V or 3 A for 125 V.ON-OFF bistable switch - PBW-12APW - 2A / 250V - flat red + resistor
A flat bistable switch with red backlight. Contact load is 2 A for 250 V. Set also includes a resistor.Tact Switch 3x6mm/5mm DIP - 5 pcs.
The little button in a black case, monostable, mounted in a through-hole way - THT, with the size: 3x6 mm and height: 5 mm Price is for 5 pieces. Product shipped in random color.IRF520 MOSFET Driver Module - Iduino ST1168
The executive module with the MOSFET transistor with the N channel to control the devices with higher current consumption than allowed by the control system, for example, a...On-Off Switch RS-101-7C - 250V/6A - blue
Switch, type on-off . Total height: 25 mm. The pins are the screw conectors.ON-OFF Switch ASW-14D with LED, 12V/20A - orange
Switch with the lever for printing with 3 contacts with a load capacity of 20 A and 12 V. Pins pitch is 6.5 mm, total height is 43 mm. The switch has a built-in light.AC power socket, eighth for case with switch
Power AC eight slot for the case with switch of ON-OFF type. Contact load is 250 V / 2.5 A.Membrane keypad - 1 green key - self-adhesive
Keyboard with single round key in green. Dimensions of the module itself are 23 x 20 mm . The keypad's outlines are made in the form of a 90 mm long tape with a 2-pin...Slide switch ESP1010 - straight
Slide switch, straight to print with the size of 10 x 2.5 x 6.5 mm. Pins pitch: 2.54 mm.Switch ON-OFF square 250V/1A - red
Switch with a square attachment with the contact's loading capacity of 1 A for 250 V or 3 A for 125 V.Lever switch ON-OFF 12V / 20A backlit - green - Adafruit 3307
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a green backlight.DIP switch 6-pole - red - 5 pcs.
Slide switch, board with six levers. Leads raster: 2.54 mm Height: 5.5 mm. Price for 5 pieces.ON-OFF Switch PBS 11A, 250V/1A - blue
Bistable switch with a circular attachment with the contacts' loading capacity of 1 A for 250 V or 3 A for 125 V.Switch ON-OFF KN3(C)-101 250V/6A
Lever print switch equipped with 2 contacts, load capacity 6 A / 250 V or 10 A / 125 V. Leads raster is 25 mm, total height 45 mm.Rotary switch 12-position / 1 circuit - 37mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 37 mm.ON-OFF Switch ASW-14D with LED, 12V/20A - blue
Switch with lever for printing, equipped with 3 contacts with a load capacity of 20 A and 12 V. Pins pitch is 6.5 mm, total height is 43 mm. The switch has a built-in...ON-OFF switch monostable - PBW-19BS - 2A / 250V flat
Monostable flat button with a loading capacity of contacts: 2 A for 250 V.