- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Electrical Actuator Super Power Jack 2000N 7,5mm/s 12V - 44cm stroke
Index: MOT-05365
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Switches and buttons - Strona 4
Loading...
Switch ON-OFF square 250V/1A - green
Switch with a square attachment with the contact's loading capacity of 1 A for 250 V or 3 A for 125 V.
Index: UCC-04293
Index: UCC-04293
Mini switch Slide MOSFET LV 2-20V/6A - with protection before reverse current - Pololu 2810
The executive module with a MOSFET transistor with a pair of channels P to control devices with higher current consumption than allowed by the control system, for example, a...
Index: PLL-04852
Index: PLL-04852
Encoder with button - 20 impulse 12mm - EC11 vertical - 5pcs.
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends the digital signal to two pins depending on the direction of...
Index: MOD-06903
Index: MOD-06903
ON-OFF Switch PBS 11A, 250V/1A - red
Bistable switch with a round attachment with the contacts' loading capacity of 1 A for 250 V or 3 A for 125 V.
Index: UCC-08385
Index: UCC-08385
Switch ON-OFF KN3(C)-101 250V/6A
Lever print switch equipped with 2 contacts, load capacity 6 A / 250 V or 10 A / 125 V. Leads raster is 25 mm, total height 45 mm.
Index: UCC-08392
Index: UCC-08392
Sensor of the rotation, pulser, rotation encoder - DFRobot EC11
A knob in the form of an encoder together with a button , allows you to create a simple user interface. The module has three signals: A and B are the encoder outputs, while...
Index: DFR-09533
Index: DFR-09533
ON-OFF Switch ASW-14D with LED, 12V/20A - blue
Switch with lever for printing, equipped with 3 contacts with a load capacity of 20 A and 12 V. Pins pitch is 6.5 mm, total height is 43 mm. The switch has a built-in...
Index: UCC-08388
Index: UCC-08388
Grove - module with MOSFET transistor
It allows for turning on and off devices that require power from 5V to 15V with a digital signal. Switching frequency up to 5 MHz. It has two mounting holes, two ARK...
Index: SEE-11339
Index: SEE-11339
Slide switch SS22T20 2-position - 5pcs.
Slide switch, straight, to print with the size of 9 x 3.5 x 3.5 mm. Pins pitch: 2.54 mm.
Index: UCC-05273
Index: UCC-05273
DFRobot Gravity - capacitive touch sensor
Capacitive touch sensor uses a digital interface to work. It can be powered with the voltage from 3.3 V to 5 V. It feels the human or metak touch, even through a fabric or paper.
Index: DFR-11264
Index: DFR-11264
ON-OFF switch monostable - PBW-19BS - 2A / 250V convex
Monostable convex button with a loading capacity of contacts: 2 A for 250 V.
Index: AKS-12071
Index: AKS-12071
Tact Switch 12x12, 7mm THT 6pin - blue backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the blue color.
Index: SWT-04783
Index: SWT-04783
DIP switch 8-pole - red - 5 pcs.
Table slide switch with 8 levers. Pins pitch: 2.54 mm, dimensions: 22 x 10 x 10 mm. 5 pcs.
Index: SWT-00369
Index: SWT-00369
Momentary switch RS-201 230V/15A
Rocker switch, momentary, two-position. It is e quipped with 6 contacts with a loading capacity of 15 A and 230 V. Pins pitch is 9 mm, The size of switch it is 33 x 30 x 24 mm.
Index: UCC-08395
Index: UCC-08395
Tact Switch 12x12mm / 7mm THT 4pin - yellow square - 10 pcs
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is in the form of a square, in the yellow color....
Index: AKS-10252
Index: AKS-10252
DFRobot Gravity - digital button Tact Switch - yellow
Digital monostable switch with 3-pin connector . It is powered from 3.3V to 5V and works with Arduino modules.
Index: DFR-11279
Index: DFR-11279
Table slide switch with 10 levers. Pins pitch: 2.54 mm Height: 5.5 mm
Index: SWT-02004
Index: SWT-02004
Tact Switch 12x12, 7mm THT 6pin - green backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the green color.
Index: SWT-04786
Index: SWT-04786
SM12F11G7 2-position slide switch - 10pcs.
Slide switch, straight to print with dimensions 23 x 14 x 7.4 mm. Lead spacing 4.20 mm.
Index: UCC-06157
Index: UCC-06157
Switch On-Off IRS-101-8C/D 12VDC/20A with lightning - green
Switch, type on-off with the built-in backlight. The load capacity of the contacts is 12 V / 20 A.
Index: KAB-06685
Index: KAB-06685
Rocker switch, triple RS203-6C3R - 250V / 16A - red
Rocker switch, triple, type of On-Off with backlight. It is e quipped with the 9 contacts with the load capacity of 250 V / 16 A. Pins pitch is 11 mm. The size of the switch...
Index: AKS-12064
Index: AKS-12064
Velleman VMA315 - Thumb Joystick with button - 2pcs.
The module is equipped with a joystick similar to analog devices used for example in PlayStation controllers. It has the ability to detect movements in two directions and...
Index: VEL-13025
Index: VEL-13025
Thumb Joystick Switch 4+1-directions - 10x10x10mm
A small joystick mounted in THT through the hole way - with the six pins with the size of 10 x 10 x 10 mm, 5-directional.
Index: AKS-13642
Index: AKS-13642
Tact Switch 12x12mm - colored buttons - 4pcs. - SparkFun PRT-14460
Monostable button mounted in a through-hole way - THT with the size: 12x12 mm, height: 8 mm. In the set are 4 buttons.
Index: SPF-10665
Index: SPF-10665