- New
- New
- Reduced price
- Promotion
LCD 1,3'' 240x240px HAT for Raspberry Pi - SB Components SKU21864
Index: SBC-20403
- On sale!
- Promotion
- On sale!
- Promotion
- On sale!
- Promotion
Switches and buttons - Strona 3
Loading...
DIP switch 2-pole - red - 5 pcs.
Table slide switch with two levers. Pins pitch: 2.54 mm, height: 5.5 mm. 5 pcs.
Index: SWT-00366
Index: SWT-00366
Bistabile switch ON-OFF PB-12A-213WD, round 30V/1A
Bistable switch with a round attachment with a loading capacity of 1A contacts for 30 V.
Index: AKS-10235
Index: AKS-10235
On-Off switch KCD5 250V / 6A - black
Switch, type On-Off. The load capacity of the contacts is 250 V / 15 A.
Index: AKS-12065
Index: AKS-12065
Rocker switch RS203-6C3R - 250V / 16A - red
Rocker switch, 3-position, bistable. It is e quipped with 6 contacts with the load of 250 V / 16. Pins pitch is 11 mm. The size of the switch: 32 x 31,5 x 25 mm.
Index: AKS-12075
Index: AKS-12075
Arcade Push Button 3,3cm black case - green with backlight
A push button with an outside diameter of 33 mm and a height of 60 mm, with a built-in LED that illuminates the dome in green. A simple limit switch is included with the button.
Index: SWT-05282
Index: SWT-05282
Switch ON-OFF square 250V/1A - red
Switch with a square attachment with the contact's loading capacity of 1 A for 250 V or 3 A for 125 V.
Index: UCC-03058
Index: UCC-03058
Module with the touch button built into the mosaic of the PCB. It is powered with the voltage of 5 V with the digital output signal.
Index: OST-14269
Index: OST-14269
Membrane keypad - 4 coloured keys - self-adhesive
Furniture keyboard with 4 coloured buttons, to connect the keyboard a tape ended with a 5-pin female connector is used. Raster of the connector leads is 2.54 mm . The...
Index: DNG-16996
Index: DNG-16996
Membrane keypad - 1 blue key - self-adhesive
The keyboard with one key in blue has been equipped with a self-adhesive tape which allows to place the keyboard on any surface and in any place. The connectors of the...
Index: DNG-16988
Index: DNG-16988
Push Button 6cm - yellow - flat
Large, flat button with an outer diameter of 6 cm with built-in LED illuminating the dome.
Index: DNG-10987
Index: DNG-10987
Tact Switch 12x12, 7mm THT 6pin - red backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the red color.
Index: SWT-04785
Index: SWT-04785
IRF520 MOSFET Driver Module - Iduino ST1168
The executive module with the MOSFET transistor with the N channel to control the devices with higher current consumption than allowed by the control system, for example, a...
Index: MOD-08236
Index: MOD-08236
ON-OFF Switch ASW-14D with LED, 12V/20A - green
Switch with lever for printing equipped with 3 contacts with a load capacity of 20 A and 12 V. Pins pitch is 6.5 mm, total height is 43 mm. The switch has a built-in...
Index: UCC-08389
Index: UCC-08389
DIP switch 3-pole - red - 5pcs.
Slide switch, board with three levers. Leads Raster: 2.54 mm Housing height: 5.5 mm
Index: SWT-00367
Index: SWT-00367
On-Off switch IRS-101-1B - 250VAC/16A - red
Switch with backlight, type on-off. The load capacity of the contacts is 250 V / 16 A.
Index: KAB-06673
Index: KAB-06673
On-Off Switch RS-101-7C - 250V/6A - blue
Switch, type on-off . Total height: 25 mm. The pins are the screw conectors.
Index: UCC-08383
Index: UCC-08383
Bistable switch ON-OFF PB-12A, round 30V/1A - black - 5pcs.
Bistable switch with a round attachment with a loading capacity of 1A contacts for 30 V or 3 A for 125 V.
Index: AKS-10233
Index: AKS-10233
Tact Switch 3x6mm 5mm SMD - 5pcs.
A small button Tact Switch, monostable, mounted in the surface way - SMD, with the size: 3 x 6 mm, height: 5 mm. Price for 5 pieces.
Index: SWT-11104
Index: SWT-11104
Encoder with button - 20 impulse 12mm - EC11 vertical - 5pcs.
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends the digital signal to two pins depending on the direction of...
Index: MOD-06903
Index: MOD-06903
Membrane keypad - 3 coloured buttons - self-adhesive
Equipped with 3 colour membrane keypad buttons . Simple input device allowing to control projects e.g. based on Arduino or STM32. Keyboard leads are made in the form of 90 mm...
Index: DNG-16995
Index: DNG-16995
Tact Switch 12x12, 7mm THT 6pin - white backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the white color.
Index: SWT-04784
Index: SWT-04784
ON-OFF Switch PBS 11A, 250V/1A - red
Bistable switch with a round attachment with the contacts' loading capacity of 1 A for 250 V or 3 A for 125 V.
Index: UCC-08385
Index: UCC-08385
Sensor of the rotation, pulser, rotation encoder - DFRobot EC11
A knob in the form of an encoder together with a button , allows you to create a simple user interface. The module has three signals: A and B are the encoder outputs, while...
Index: DFR-09533
Index: DFR-09533
Membrane keypad - 2 coloured buttons - self-adhesive
Keyboard equipped with two colored buttons. Keyboard leads are made in the form of a connection tape finished with 3-pin raster 2.54 mm . Plug located at the end of the...
Index: DNG-16993
Index: DNG-16993
