Description
Soldering station which is a combination of hotair, soldering iron and heater. It has a total capacity of 1270 W. It is equipped in e.g. a convenient temperature regulation, cooling system after finishing work, ESD-safe, system of error detection. The airflow is implemented using a brushless motor that is in the flask. The parameters are controlled using PID-controller and displayed on an easily readable LCD display.
Soldering station which is a combination of hot air, a soldering iron and heater.
Specification
- Supply voltage: 230 V / 50 Hz (network)
- Power: 1270 W
- LCD display
- Control through PID
- Rapid heating to a predetermined temperature
- Cooling system after finishing work
- Convenient adjustment of airflow
- ESD-safe
- Safe soldering of elements sensitive to temperature: QFP, PLCC, BGA
Hotair Soldering Iron
- Adjustable temperature of hot air from 100 °C to 480 °C
- Temperature stability +/-1 °C
- The source of airflow: the fan in the flask, based on the brushless motor
- Airflow up to 130 l/min
Soldering Iron Grotowa
- Adjustable temperature of soldering tip: 200 °C to 480 °C
- Temperature stability +/- 1 °C
- Soldering iron power: 75
- Voltage of ground: up to 2 mV
- Ground resistance: up to 2 Ω
Heater
- Power consumption: 600 To
- Temperature stability +/- 2 °C
- The surface of the heater: 120 x 120 mm
- Maximum holder width: 170 mm
Set includes:
- Soldering station, heater WEP 853AAA
- The flask hotair
- Mount for the flask hotair
- The grotto bulb
- Mount for the grotto flask with sponge for cleaning the soldering tip
- Nozzle set:
- round with a diameter of 4.4 mm
- round with a diameter of 7 mm
- round with a diameter of 9 mm
- square 12 x 12 mm
- A gripper for lifting chips
- Power cable
- The user manual
|
First run
Note Heating elements (heaters) and the tips are not subject to warranty either expressed or implied, and replacing them is chargeable. |
Our range has alsoaccessoriesfor soldering:
- solders - tins with various diameters
- fluxes and calaphonies
- braids to remove the excess of tin
- extractors
- soldering tips
- tweezers,holders, magnifiers
- sponges and cleaning cloths
