Set includes the minicomputerNano Neo Pi 512 MB, heatsink, Converter USB-UARTand aluminum case. In addition, the kit is supplied with a memory card, and necessary mounting elements.
|1||NanoPi NEO 512 MB- minicomputer NanoPi in version 1.3 Neo with a processor Allwinner H3 quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. The board has 512 MB DDR3 RAM, built-in Ethernet port and USB connector + 2 x USB Host on pins 2.54 mm, 36 GPIO, connector for memory cards microSD. It works with manufacturer's systems u-boot and UbuntuCore.|
Heatsink with thermoconductive tape for NanoPi NEO- heatsink with thermoconductive paste and mounting screws dedicated for the minicomputer NanoPi Neo.
|3||Aluminium case - silver case with brown buttons size 44 x 47 x 33 mm.|
|4||MicroSD memory cardclass 10 16 GB with installed OS Linux Ubuntu 16.04 .
|5||NanoHat OLED panel for Nano Pi with OLED display 0,96" and a resolution of 128 x 64|
Minicomputer NanoPi in version Neo v1.3 with a processor - Allwinner H3 quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. The board has 512 MB of memory DDR3, built-in port Ethernet and USB port + 2x USB Host on pins 2.54 mm, 36 GPIO, connector for memory cards microSD. Works with manufacturer's systems u-boot and UbuntuCore.
The great advantage of the board is its small size, the dimensions of the board are 40 x 40 mm.
Power of the device
Unfortunately, the manufacturer did not include the power supply kit. NanoPi Neo requires 5 V power and it is supplied via microUSB. In our store there is available the power supply with the resective connector microUSB.
The device has a USB plug connector and an Ethernet port and many others.
NanoPi works with the systems selected manufacturer: u-boot and UbuntuCore. The device's drive can be a microSD card, which can be purchased in our store.
Operating systems can be downloaded fromthe manufacturer's website.
The manufacturer also providesguide on the installation of the system.
Quad-Core ARM Cortex A7
|Clock frequency||1.2 GHz|
microSD memory card
5 V / 2 A - microUSB
|Board size||40 x 40 mm|
1 x USB A socket
2 x USB Host on pins 2.54 mm
|Network interface||Ethernet 10/100 Mbps|
audio output and microphone
out on the GPIO connector
UART, SPI, I2C, GPIO, PWM
Serial port 4pin / 2.54 mm