- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 7
Loading...
Connecting cables female-female 60cm - 40pcs
Set includes 40 PCs of colorful connection cables with length of 60 cm, ended, from both sides, with female connector on goldpin.
Index: KAB-03479
Index: KAB-03479
Seeed Xiao ESP32-C3 - WiFi/Bluetooth - Seeedstudio 113991054
Seeed Xiao is a thumb-sized module, equipped with a powerful ESP32-C3 chip with a new 32-bit RISC-V architecture. Enables 2.4 GHz WiFi and Bluetooth 5.0 / Mesh wireless...
Index: SEE-21859
Index: SEE-21859
Potentiometer mounting lying 20kΩ - 5pcs
Horizontal mounting potentiometer RM-065 in the through hole case with a resistance of 20 kΩ. Price is for 5 pieces.
Index: PAS-01238
Index: PAS-01238
- Sale
- SPECIAL OFFERS
Transistor N-MOSFET IRL540NPBF - THT - 5pcs
Vds: 100 V Id: 36A. Rdson: 0,044 Ohm. Case: TO-220. Items are sold in sets of 5 pieces.
Index: UCC-00127
Index: UCC-00127
Quick connector DC 5.5 x 2.1mm
DC φ5.5 x 2.1 mm socket (for AC adapter) with the connector allowing you to mount the cable using the buttons.
Index: KAB-07466
Index: KAB-07466
BLS connector - 6x1 socket - 5pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 6x1.
Index: KAB-04261
Index: KAB-04261
- Sale
Module with microUSB socket allows you to connect a microUSB connector to any system. Output raster: 2.54 mm, suitable for standard breadboards and connection cables, available...
Index: MOD-07668
Index: MOD-07668
16-channel relay module with optoisolation - 10A / 250VAC contacts - 12V coil
The module is equipped with sixteen JQC3F-12VDC-C relays with a 12-volt coil with optoelectronic isolation. The system allows you to control the actuators using the...
Index: MOD-06941
Index: MOD-06941
Spring bolt with a rounded head designed for connecting and testing the modules with the pins on the goldpin straps without the need of soldering.
Index: MOD-05729
Index: MOD-05729
Light sensor LDR resistive for Arduino - Okystar
The LDR digital light sensor module is very sensitive to ambient light. Usually used to detect the brightness and intensity of ambient light. The signal detection...
Index: OKY-16560
Index: OKY-16560
Adapter plug DC 5,5/2,1mm - plug connector 6F22 battery 9V
Adapter that allows you to connect a popular 9 V 6F22 battery for DC 5.5/2.1 mm connectors used in development sets, for example, Arduino.
Index: AKC-01369
Index: AKC-01369
Set of heat sinks for Raspberry Pi - with heat transfer tape - gold - 4pcs.
The set consists of 4 pieces of gold heatsinks, in sizes 14 x 14 mm , 14 x 10 mm, 9 x 9 mm, 7 x 7 mm. On the back of each one there is double sided, thermally...
Index: DNG-18747
Index: DNG-18747
IR remote control - 20 buttons
Universal IR remote designed for easy control of microcontrollers and Arduino-based projects. The remote supports the NEC protocol at 38 kHz , ensuring stable signal...
Index: AKS-19284
Index: AKS-19284
Raspberry Pi camera tape - 20cm 15-core 1mm raster
Tape with a length of 20 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-01908
Index: RPI-01908
Step-Down Voltage Regulator with Display LM2596S - 3.2V-35V 3A
Module with LM2596S step-down switching converter. Input voltage from 3.2 V to 35 V. Maximum continuous output current 3 A. Output voltage adjustable from 3.2 V to 35 V....
Index: MOD-04871
Index: MOD-04871
Nylon Distance Bolts 10mm with M3 Thread - 10pcs.
Distance made of plastic, with a length of 10 mm and M3 thread. Price is for 10 pieces. Elements of this type allow to keep a constant distance between the mounted boards.
Index: AKS-11160
Index: AKS-11160
- Sale
- SPECIAL OFFERS
ADXL345 3-axis I2C/SPI digital accelerator - module
Sensor for measuring acceleration in three axes in the range +/- 16 g. The module is powered with the voltage from 3 to 5 V, it has the voltage regulator and is communicating...
Index: MOD-01912
Index: MOD-01912
5mm 12V LED with resistor and wire - blue - 5pcs.
5mm blue LED with attached resistor and 18cm long cable. It is powered by 12 V DC.
Index: LED-04755
Index: LED-04755
- Sale
- SPECIAL OFFERS
IR beam interruption sensor - LED 3mm - 0-25 cm
The sensor reacts to an interruption in the beam of infrared light that is transmitted between the transmitter and receiver. The module is equipped with a 3 mm IR LED with...
Index: DNG-18687
Index: DNG-18687
Relay NT73-2C-S12 - 5V coil, 2x 12A/125VAC contacts
Coil voltage: 5, contacts: 12 A / 125 V AC. Dimensions: 19.5 x 15.6 mm, height: 15,3 mm.
Index: PAS-01565
Index: PAS-01565
The 2-pin plug for printing, the pitch is 2.54 mm. The set includes 5 x 2-pin plugs.
Index: KAB-06776
Index: KAB-06776
- Sale
Socket 1x16pin - 2,54mm - long
16-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm. It features long pins with a length of 10.5 mm.
Index: UCC-08511
Index: UCC-08511
ESP8266 wifi module + NodeMcu v3
Wi-fi module, based on ESP8266 system. On Board 10 GPIO ports (each of which can handle PWM, I2C and 1-wire), built-in 10-bit ADC and a converter USB-UART. It has installed...
Index: MOD-08241
Index: MOD-08241
Raspberry Pi Debug Probe - USB debugger for Raspberry Pi Pico
The Raspberry Pi Debug Probe is an all-in-one device for serial debugging via USB , it also functions as a UART bridge. It allows you to debug Raspberry Pi Pico / RP2040...
Index: RPI-22625
Index: RPI-22625