- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: BitScope BS10U - USB mixed signal oscilloscope for Raspberry Pi
Despite its small size, the BitScope BS10U is a fullyfunctionalmixed signaloscilloscope. It is more than just a small USB logical analyzer. It is a USB oscilloscope, a logical analyzer, a waveform generator and a spectrum analyzer compatible with RaspberryPi.
Oscilloscope for Raspberry Pi - BitScope BS10U.
Ideal for creating projects
The pocket-sized analyzer supports 5 V and 3.3 V, I/O and clock signals, so it can power and control clock logic or microcontroller circuits. It has a 100 MHz band with a sampling rate of 40 MS/s, generates a waveform and a clock and offers control of connected devices via a serial interface.
The outputs are in the BitScope BS10U.
It is an ideal tool for prototyping projects using analog, digital and logic circuits or Arduino, Raspberry pi and other systems based on microcontrollers with buses, sensors, servos and I/O. All you need to prototype new projects are basic electronic components, prototype boards, connection cables and sometimes Raspberry Pi or Arduino with accessories.
Mixed Signal Analyzer
BitScope intercepts and generates a mixed signal. The heart is the BitScope DSP Capture Engine. It is responsible for the waveform capturing function and synchronization with the triggered mixed signal and the waveform and clock generator. It also manages logic and analog buffers, input channel ranges and offsets.
Distribution of components in BS10U.
It works with BitScope software applications on a host computer, a Pocket Analyzer for signal acquisition, processing and synthesis of components running together to implement a wide range of test and measurement devices that can run at the same time.
Looking at the serial logic of protocols such as SPI, I2C, CAN or asynchronous protocols such as RS-232 or 422, etc. BitScope Logic is a good choice.
BitScope Logic software.
This application is similar to the VAS mixed signal device, but offers a full package of protocols with display. BitScope Logic and Pocket Analyzer can display decoded logic when capturing frame by frame.
Main features of the BitScope BS10U oscilloscope
- Bandwidth: 100 MHz
- Sampling rate: 40 MS/s
- 2 analogue channels of the oscilloscope
- 8 channels of the logical analyzer
- SPI, I2C, CAN, UART logical decoders
- It works with systems: Windows, Linux, Mac OS X, Raspberry
- A waveform, logic and clock generator
- Spectrum and RF analyser
- Small dimensions
- Power and ground control
Useful links |
